SUBMINIATURE SOLID STATE LAMP PRELIMINARY SPEC Part Number: AM27PBC/A08 BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description ●SUBMINIATURE PACKAGE. The Blue source color devices are made with InGaN on SiC ●WIDE VIEWING ANGLE. Light Emitting Diode. ●YOKE LEAD. Static electricity and surge damage the LEDS. ●LONG LIFE-SOLID STATE RELIABILITY. It is recommended to use a wrist band or anti-electrostatic ●LOW PACKAGE PROFILE. glove when handling the LEDs. ●MOISTURE SENSITIVITY LEVEL : LEVEL 3. All devices, equipment and machinery must be electrically ●PACKAGE : 1000PCS / REEL. grounded. ●RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG5698 REV NO: V.1 DATE: JUN/17/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1202001481 Selection Guide Dice Part No. AM27PBC/A08 Iv (mcd) [2] @ 20 mA Lens Type BLUE (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 110 250 20° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5698 REV NO: V.1 DATE: JUN/17/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1202001481 Blue AM27PBC/A08 SPEC NO: DSAG5698 REV NO: V.1 DATE: JUN/17/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1202001481 AM27PBC/A08 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5698 REV NO: V.1 DATE: JUN/17/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1202001481 PACKING & LABEL SPECIFICATIONS AM27PBC/A08 SPEC NO: DSAG5698 REV NO: V.1 DATE: JUN/17/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1202001481