KINGBRIGHT AP3216SURCK

3.2x1.6mm SMD CHIP LED LAMP
Part Number: AP3216SURCK
Features
Description
z3.2mmx1.6mm
zLOW
SMT LED, 1.1mm THICKNESS.
POWER CONSUMPTION.
zWIDE
zIDEAL
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
VIEWING ANGLE.
FOR BACKLIGHT AND INDICATOR.
zVARIOUS
COLORS AND LENS TYPES AVAILABLE.
zPACKAGE
: 2000PCS / REEL.
zMOISTURE
zRoHS
HYPER RED
SENSITIVITY LEVEL : LEVEL 3.
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD0981
REV NO: V.5
DATE: SEP/12/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP: 1203000423
Selection Guide
Dice
Part No.
AP3216SURCK
Iv (mcd) [2]
@ 20mA
Lens Type
HYPER RED (InGaAlP)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2 θ 1/2
50
150
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Hyper Red
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
650
nm
IF=20mA
Hyper Red
635
nm
IF=20mA
Spectral Line Half-width
Hyper Red
28
nm
IF=20mA
C
Capacitance
Hyper Red
35
pF
VF=0V;f=1MHz
VF[2]
Forward Voltage
Hyper Red
1.95
2.5
V
IF=20mA
IR
Reverse Current
Hyper Red
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Units
Power dissipation
170
mW
DC Forward Current
30
mA
Peak Forward Current [1]
185
mA
5
V
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD0981
REV NO: V.5
DATE: SEP/12/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP: 1203000423
Hyper Red
AP3216SURCK
SPEC NO: DSAD0981
REV NO: V.5
DATE: SEP/12/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP: 1203000423
AP3216SURCK
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD0981
REV NO: V.5
DATE: SEP/12/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP: 1203000423
PACKING & LABEL SPECIFICATIONS
AP3216SURCK
SPEC NO: DSAD0981
REV NO: V.5
DATE: SEP/12/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: S.J.LIU
ERP: 1203000423