KINGBRIGHT BA56

14.22mm (0.56INCH) THREE DIGIT NUMERIC
DISPLAY
Part Number: BA56-11YWA
Yellow
Features
Description
z 0.56 INCH DIGIT HEIGHT.
The Yellow source color devices are made with Gallium
z LOW CURRENT OPERATION.
Arsenide Phosphide on Gallium Phosphide Yellow Light
z EXCELLENT CHARACTER APPEARANCE.
Emitting Diode.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z I.C. COMPATIBLE.
z MECHANICALLY RUGGED.
z STANDARD: GRAY FACE, WHITE SEGMENT.
z RoHS COMPLIANT.
Package Dimensions& Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAA3882
REV NO: V.10
APPROVED: WYNEC
CHECKED: Joe Lee
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 1 OF 4
ERP: 1303000074
Selection Guide
Part No.
Dice
BA56-11YWA
Yellow (GaAsP/GaP)
Lens Type
WHITE DIFFUSED
Iv (ucd) [1]
@ 10mA
Min.
Typ.
1900
8000
Description
Common Anode ,Rt.
Hand Decimal.
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Yellow
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Yellow
588
nm
IF=20mA
Spectral Line Half-width
Yellow
35
nm
IF=20mA
C
Capacitance
Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Yellow
2.1
2.5
V
IF=20mA
IR
Reverse Current
Yellow
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Yellow
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
140
mA
5
V
Reverse Voltage
Operating / Storage Temperature
Lead Solder Temperature[2]
-40°C To +85°C
260°C For 3-5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAA3882
REV NO: V.10
APPROVED: WYNEC
CHECKED: Joe Lee
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 2 OF 4
ERP: 1303000074
Yellow
BA56-11YWA
SPEC NO: DSAA3882
REV NO: V.10
APPROVED: WYNEC
CHECKED: Joe Lee
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 3 OF 4
ERP: 1303000074
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAA3882
REV NO: V.10
APPROVED: WYNEC
CHECKED: Joe Lee
BA56-11YWA
DATE: MAY/24/2007
DRAWN: Y.L.LI
PAGE: 4 OF 4
ERP: 1303000074