20.32mm (0.8INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SC08-21YWA Yellow Features Description z 0.8 INCH DIGIT HEIGHT. The Yellow source color devices are made with Gallium z LOW CURRENT OPERATION. Arsenide Phosphide on Gallium Phosphide Yellow Light z EXCELLENT CHARACTER APPEARANCE. Emitting Diode. z HIGH LIGHT OUTPUT. z EASY MOUNTING ON P.C. BOARDS OR SOCKETS. z I.C. COMPATIBLE. z MECHANICALLY RUGGED. z STANDARD : GRAY FACE, WHITE SEGMENT. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB4283 REV NO: V.9 DATE: MAY/16/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1301000779 Selection Guide Part No. Dice SC08-21YWA Iv (ucd) [1] @ 10mA Lens Type Yellow (GaAsP/GaP) WHITE DIFFUSED Min. Typ. 1200 4700 Description Common Cathode, Rt. Hand Decimal Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAB4283 REV NO: V.9 DATE: MAY/16/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1301000779 Yellow SC08-21YWA SPEC NO: DSAB4283 REV NO: V.9 DATE: MAY/16/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1301000779 PACKING & LABEL SPECIFICATIONS SC08-21YWA SPEC NO: DSAB4283 REV NO: V.9 DATE: MAY/16/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1301000779