6.8mmx19.9mm LIGHT BAR Part Number: DF3GD Features Green Description UNIFORM LIGHT EMITTING AREA. The Green source color devices are made with Gallium EASILY MOUNTED ON P.C. BOARDS OR Phosphide Green Light Emitting Diode. NDUSTRY STANDARD SOCKETS. FLUSH MOUNTABLE. EXCELLENT ON/OFF CONTRAST. CAN BE USED WITH PANELS AND LEGEND MOUNTS. MECHANICALLY RUGGED. I.C. COMPATIBLE. RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram 1.All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2.Specifications are subject to change without notice. SPEC NO: DSAD1419 REV NO: V.7 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1334000047 Selection Guide Part No. Dice DF3GD Iv (mcd) [1] @ 10mA Lens Type Green (GaP) GREEN DIFFUSED Min. Typ. 12 52 Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD1419 REV NO: V.7 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1334000047 Green DF3GD SPEC NO: DSAD1419 REV NO: V.7 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1334000047 PACKING & LABEL SPECIFICATIONS DF3GD SPEC NO: DSAD1419 REV NO: V.7 DATE: MAY/14/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1334000047