KINGBRIGHT KP

PHOTOTRANSISTOR
KP-1608P1C
WATER CLEAR LENS
Description
Features
! MECHANICALLY
AND SPECTRALLY MATCHED TO
Made with NPN silicon phototransistor chips.
THE KP-1608 SERIES INFRARED EMITTING LED LAMP.
! WATER
CLEAR LENS.
! PACKAGE
:2000PCS/REEL.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
SPEC NO: KDA0532
APPROVED:J.LU
REV NO: V.1
CHECKED:
DATE: SEP/17/2001
DRAWN:X.Q.ZHENG
PAGE: 1 OF 3
Absolute Maximum Rating at T)=25°°C
Par ameter
Max . Ratin g s
Collector-to-Emitter Breakdown Voltage
30V
Emitter-to-Collector Breakdown Voltage
5V
Power Dissipation at (or below) 25°C Free Air Temperature
100mW
Operating Temperature Range
-40°C ~ +85°C
Storage Temperature Range
-40°C ~ +85°C
Electrical And Radiant Characteristics at T)=25°°C
Sy m b o l
Par ameter
Min .
Ty p .
Max .
Un i t
Tes t Co n d ic tio n
V BR C EO
Collector-to-Emitter Breakdown Voltage
30
-
-
V
I C=100uA,
Ee=0mW/cm2
V BR EC O
Emitter-to-Collector Breakdown Voltage
5
-
-
V
I E=100uA,
Ee=0mW/cm2
VCE (SAT)
Collector-to-Emitter Saturation Voltage
-
-
0.8
V
I C=2mA,
Ee=20mW/cm2
ICEO
Collector Dark Current
-
-
100
nA
VCE=10V,
Ee=0mW/cm2
TR
Rise Time (10% to 90%)
-
3
-
us
TF
Fall Time (90% to 10%)
-
3
-
us
VCE=5V,
IC=1mA,
RL=1000Ω
0.1
0.3
-
mA
I (ON)
On State Collector Current
SPEC NO: KDA0532
APPROVED:J.LU
REV NO: V.1
CHECKED:
DATE: SEP/17/2001
DRAWN:X.Q.ZHENG
VCE=5V,
Ee=1mW/cm2,
λ=940nm
PAGE: 2 OF 3
KP-1608P1C
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: KDA0532
APPROVED:J.LU
REV NO: V.1
CHECKED:
DATE: SEP/17/2001
DRAWN:X.Q.ZHENG
PAGE: 3 OF 3