1.6X0.8mm PHOTOTRANSISTOR Part Number: AP1608P1C Description Features z 1.6mmX0.8mm SMT LED, 1.1mm thickness. Made with silicon phototransistor chips. z Mechanically and spectrally matched to infrared emitting LED lamp. z Water clear lens. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1375 REV NO: V.11 DATE: DEC/15/2010 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000037 Electrical / Optical Characteristics at TA=25°C Symbol Parameter Min. VBR CEO Collector-to-Emitter Breakdown Voltage VBR ECO Emitter-to-Collector Breakdown Voltage VCE (SAT) Collector-to-Emitter Saturation Voltage Collector Dark Current I CEO Typ. Max. Units Test Conditions 30 V IC=100uA Ee=0mW/c ㎡ 5 V IE=100uA Ee=0mW/c ㎡ 0.8 V IC=2mA Ee=20mW/c ㎡ 100 nA VCE=10V Ee=0mW/c ㎡ TR Rise Time (10% to 90% ) 15 us TF Fall Time (90% to 10% ) 15 us 0.3 mA 120 deg I (ON) On State Collector Current 2θ1/2 Angle of half sensitivity 0.1 VCE = 5V IC=1mA RL=1000Ω VCE = 5V Ee=1mW/c ㎡ λ=940nm Absolute Maximum Ratings at TA=25°C Parameter Max.Ratings Collector-to-Emitter Voltage 30V Emitter-to-Collector Voltage 5V Power Dissipation at (or below) 25°C Free Air Temperature 100mW Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C SPEC NO: DSAD1375 REV NO: V.11 DATE: DEC/15/2010 PAGE: 2 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000037 AP1608P1C Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAD1375 REV NO: V.11 DATE: DEC/15/2010 PAGE: 3 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000037 PACKING & LABEL SPECIFICATIONS AP1608P1C SPEC NO: DSAD1375 REV NO: V.11 DATE: DEC/15/2010 PAGE: 4 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000037