T-1 3/4 (5mm) SOLID STATE LAMP L-53GT GREEN Features Description !LOW The Green source color devices are made with POWER CONSUMPTION. ! POPULAR T-1 3/4 DIAMETER PACKAGE. !GENERAL PURPOSE LEADS. ! RELIABLE AND RUGGED. ! LONG Gallium Phosphide Green Light Emitting Diode. LIFE - SOLID STATE RELIABILITY. ! AVAILABLE ON TAPE AND REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAA4432 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: FEB/24/2003 DRAWN: K.ZHANG PAGE: 1 OF 3 Selection Guide Par t No . Di c e L-53GT Iv (mc d ) @ 10 mA L en s Ty p e GREEN(GaP) GREEN TRANSPARENT View in g An g l e Min . Ty p . 2θ1/2 18 60 30° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par ameter λpeak Peak Wavelength Green λD Dominate Wavelength ∆λ1/2 Dev ic e Ty p . Un i t s Tes t Co n d itio n s 565 nm I F =20mA Green 568 nm I F =20mA Spectral Line Half-width Green 30 nm I F =20mA pF VF = 0V;f=1MHz 2.5 V I F =20mA 10 uA VR = 5V C Capacitance Green 15 VF Forward Voltage Green 2.2 IR Reverse Current Green Max . Absolute Maximum Ratings at T)=25°°C Par ameter Gr een Un i t s Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA4432 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: FEB/24/2003 DRAWN: K.ZHANG PAGE: 2 OF 3 Green L-53GT SPEC NO: DSAA4432 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: FEB/24/2003 DRAWN: K.ZHANG PAGE: 3 OF 3