T-1 (3mm) SOLID STATE LAMP L-934GT GREEN Features Description !LOW POWER CONSUMPTION. The Green source color devices are made with !POPULAR T-1 DIAMETER PACKAGE. Gallium Phosphide Green Light Emitting Diode. !GENERAL PURPOSE LEADS. !RELIABLE AND RUGGED. ! LONG LIFE - SOLID STATE RELIABILITY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAA4480 APPROVED : J. Lu REV NO: V.2 CHECKED:Allen Liu DATE:JAN/07/2003 DRAWN:Y.H.LI PAGE: 1 OF 3 Selection Guide Par t No . Dic e L-934GT Iv (m c d ) @ 10 m A L en s Ty p e GREEN(GaP) V i ew i n g An g l e Min . Ty p . 2θ1/2 18 60 50 ° GREEN TRANSPARENT Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength Green λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 565 nm I F =20mA Green 568 nm I F =20mA Spectral Line Half-width Green 30 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V C Capacitance Green 15 VF Forward Voltage Green 2.2 IR Reverse Current Green Max . Absolute Maximum Ratings at T)=25°°C P ar am e t e r Gr een Un it s Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA4480 APPROVED : J. Lu REV NO: V.2 CHECKED:Allen Liu DATE:JAN/07/2003 DRAWN:Y.H.LI PAGE: 2 OF 3 Green L-934GT SPEC NO: DSAA4480 APPROVED : J. Lu REV NO: V.2 CHECKED:Allen Liu DATE:JAN/07/2003 DRAWN:Y.H.LI PAGE: 3 OF 3