T-1(3mm) BI-COLOR INDICATOR LAMP L-93WGYW GREEN / YELLOW Features z UNIFORM z LOW LIGHT OUTPUT. The Green source color devices are made with Gallium POWER CONSUMPTION. z MILKY z3 Description Phosphide Green Light Emitting Diode. WHITE DIFFUSION LENS. The Yellow source color devices are made with Gallium LEADS WITH ONE COMMON LEAD. Arsenide Phosphide on Gallium Phosphide Yellow Light z THIRD z I.C. COLOR (MIXED COLOR) AVAILABLE. Emitting Diode. COMPATIBLE. z LONG LIFE - SOLID STATE RELIABILITY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. L-93WGYW-V.1#1 FEB/21/2001 Selection Guide Part No. Dice Iv (mcd) @ 20 mA Lens Type Min. Typ. 20 40 20 40 GREEN (GaP) L-93WGYW Viewing Angle WHITE DIFFUSED 2θ1/2 60° YELLOW (GaAsP/GaP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par ameter Dev ic e λpeak Peak Wavelength Green Yellow ∆1/2 Spectral Line Halfwidth C Ty p . Max . Un i t s Tes t Co n d itio n s 565 590 nm IF=20mA Green Yellow 30 35 nm IF=20mA Capacitance Green Yellow 45 10 pF VF=0V;f=1MHz VF Forward Voltage Green Yellow 2.2 2.1 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at T)=25°°C Par ameter Gr een Yello w Un i t s Power dissipation 105 105 mW DC Forward Current 25 30 mA Peak Forward Current [1] 150 150 mA 5 5 V Reverse Voltage -40°C To +85°C Operation/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. L-93WGYW-V.1#2 FEB/21/2001 Green / Yellow L-93WGYW L-93WGYW-V.1#3 FEB/21/2001