44.5mm (1.75INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SBA18-11EGWA High Efficiency Red Green Features Description ●1.75 INCH DIGIT HEIGHT. The High Efficiency Red source color devices are made with ●LOW CURRENT OPERATION. Gallium Arsenide Phosphide on Gallium Phosphide Orange ●EXCELLENT CHARACTER APPEARANCE. Light Emitting Diode. ●HIGH LIGHT OUTPUT. The Green source color devices are made with Gallium ●EASY MOUNTING ON P.C. BOARDS OR SOCKETS. Phosphide Green Light Emitting Diode. ●I.C. COMPATIBLE. ●MULTICOLOR AVAILABLE. ●MECHANICALLY RUGGED. ●STANDARD : GRAY FACE, WHITE SEGMENT. ●RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAC1575 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1301000643 Selection Guide Part No. Dice High Efficiency Red (GaAsP/GaP) SBA18-11EGWA Iv (ucd) [1] @ 10mA Lens Type WHITE DIFFUSED Green (GaP) Min. Typ. 4700 24000 3000 12000 Description Common Anode ,Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Per Segment Or (DP) High Efficiency Red Green 6.0 (2.0) 6.6 (2.2) 7.5 (2.5) 7.5 (2.5) V IF=20mA IR Reverse Current Per Segment Or (DP) High Efficiency Red Green 10 (10) uA VR=15V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Green Units Power dissipation Per Segment Or (DP) 225 (75) 187.5 (62.5) mW DC Forward Current Per Segment Or (DP) 30 (30) 25 (25) mA 160 (160) 140 (140) mA Peak Forward Current [1] Per Segment Or (DP) Reverse Voltage Per Segment Or (DP) 15 (5) Operating/Storage Temperature Lead Solder Temperature [2] V -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAC1575 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1301000643 SBA18-11EGWA High Efficiency Red SPEC NO: DSAC1575 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1301000643 SPEC NO: DSAC1575 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1301000643 Green SPEC NO: DSAC1575 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1301000643 SPEC NO: DSAC1575 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1301000643 PACKING & LABEL SPECIFICATIONS SBA18-11EGWA SPEC NO: DSAC1575 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1301000643