30mm (1.2 INCH) 5x7 DOT MATRIX DISPLAY Part Number: TA12-11GWA Green Features Description z 1.2 INCH MATRIX HEIGHT. The Green source color devices are made with Gallium z DOT SIZE 3mm. Phosphide Green Light Emitting Diode. z LOW CURRENT OPERATION. z HIGH CONTRAST AND LIGHT OUTPUT. z COMPATIBLE WITH ASCII AND EBCDIC CODES. z COLUMN CATHODE AND COLUMN ANODE AVAILABLE. z EASY MOUNTING ON P.C. BOARDS OR SOCKETS. z MECHANICALLY RUGGED. z STANDARD : GRAY FACE, WHITE DOT. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2432 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1332000067 Selection Guide Part No. Dice TA12-11GWA Green (GaP) Iv (ucd) [1] @ 10mA Lens Type WHITE DIFFUSED Description Min. Typ. 4700 19000 Column Anode Units Test Conditions Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength Green 565 nm IF=20mA λD [1] Dominant Wavelength Green 568 nm IF=20mA Δλ1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2432 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1332000067 Green TA12-11GWA SPEC NO: DSAD2432 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1332000067 PACKING & LABEL SPECIFICATIONS TA12-11GWA SPEC NO: DSAD2432 REV NO: V.8 DATE: MAY/24/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1332000067