KINGBRIGHT TBA24

60.8mm (2.4 INCH) 5x8 DOT MATRIX DISPLAY
Part Number: TBA24-22EGWA
High Efficiency Red
Green
Features
Description
z 2.4 INCH MATRIX HEIGHT.
The High Efficiency Red source color devices are made with
z DOT SIZE 5mm.
Gallium Arsenide Phosphide on Gallium Phosphide Orange
z LOW CURRENT OPERATION.
Light Emitting Diode.
z HIGH CONTRAST AND LIGHT OUTPUT.
The Green source color devices are made with Gallium
z COMPATIBLE WITH ASCII AND EBCDIC CODES.
Phosphide Green Light Emitting Diode.
z STACKABLE HORIZONTALLY.
z EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
z MULTICOLOR AVAILABLE.
z MECHANICALLY RUGGED.
z STANDARD : GRAY FACE, WHITE DOT.
z RoHS COMPLIANT
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
SPEC NO: DSAD2473
REV NO: V.8
DATE: MAY/28/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1332000321
Selection Guide
Part No.
Dice
Iv (ucd) [1]
@ 10mA
Lens Type
High Efficiency Red (GaAsP/GaP)
TBA24-22EGWA
Min.
Typ.
3000
13500
4700
20000
WHITE DIFFUSED
Green (GaP)
Description
Column Anode
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
627
565
nm
IF=20mA
High Efficiency Red
Green
625
568
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
Green
45
30
nm
IF=20mA
C
Capacitance
High Efficiency Red
Green
15
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
Green
2.0
2.2
2.5
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Green
Units
Power dissipation
75
62.5
mW
DC Forward Current
30
25
mA
Peak Forward Current [1]
160
140
mA
Reverse Voltage
5
Operating/Storage Temperature
-40°C To +85°C
Lead Solder Temperature [2]
V
260°C For 3-5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAD2473
REV NO: V.8
DATE: MAY/28/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1332000321
TBA24-22EGWA
High Efficiency Red
SPEC NO: DSAD2473
REV NO: V.8
DATE: MAY/28/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1332000321
Green
SPEC NO: DSAD2473
REV NO: V.8
DATE: MAY/28/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1332000321
PACKING & LABEL SPECIFICATIONS
TBA24-22EGWA
SPEC NO: DSAD2473
REV NO: V.8
DATE: MAY/28/2007
APPROVED: WYNEC
CHECKED: Joe Lee
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1332000321