76.2mm (3.0 INCH) 5x7 MULTICOLOR DOT MATRIX DISPLAYS TBA30-12EGWA TBC30-12EGWA Features ! 3.0 Description INCH MATRIX HEIGHT. ! DOT The High Efficiency Red source color devices are made with SIZE 7.62mm. ! LOW CURRENT OPERATION. ! HIGH CONTRAST AND LIGHT OUTPUT. ! COMPATIBLE ! STACKABLE ! COLUMN WITH ASCII AND EBCDIC CODES. HORIZONTALLY. Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. CATHODE AND COLUMN ANODE AVAILABLE. ! EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ! MULTICOLOR AVAILABLE. ! CATEGORIZED FOR LUMINOUS INTENSITY, YELLOW AND GREEN CATEGORIZED FOR COLOR. ! MECHANICALLY ! STANDARD RUGGED. : GRAY FACE, WHITE DOT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change whitout notice. SPEC NO: CDA0882 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: NOV/18/2001 DRAWN: S.H.CHEN PAGE: 1 OF 3 Selection Guide Par t No . Iv (u c d ) @ 10 m A Dic e TBA30-12EGWA HIGH EFFICIENCY RED (GaAsP/GaP) GREEN (GaP) TBC30-12EGWA D es c r i p t i o n Min . Ty p . 8000 18000 Column Anode 12000 2600 0 Column Cathode Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er λpeak Peak Wavelength High Efficiency Red Green λD Dominate Wavelength ∆λ1/2 D ev i c e Ty p . Un it s Tes t Co n d it io n s 627 565 nm IF=20mA High Efficiency Red Green 625 568 nm IF=20mA igh Efficiency Red Spectral Line Halfwidth H Green 45 30 nm IF=20mA pF VF=0V;f=1MHz 2.5 2.5 V IF=20mA 10 uA V R = 5V C Capacitance High Efficiency Red Green 15 15 VF Forward Voltage High Efficiency Red Green 2.0 2.2 IR Reverse Current All Max . Absolute Maximum Ratings at T)=25°°C P ar am e t e r H i g h E f f i c i e n c y R ed Gr een Un it s Power dissipation 105 10 5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA 5 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature 260°C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. SPEC NO: CDA0882 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: NOV/18/2001 DRAWN: S.H.CHEN PAGE: 2 OF 3 High Efficiency Red Green SPEC NO: CDA0882 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: NOV/18/2001 DRAWN: S.H.CHEN PAGE: 3 OF 3