2x5mm RECTANGULAR LED LAMP WP113GDT GREEN Features Description ORELIABLE AND RUGGED. The Green source color devices are made with Gallium OLOW POWER CONSUMPTION. OEXCELLENT UNIFORMITY OF LIGHT OUTPUT. Phosphide Green Light Emitting Diode. OSUITABLE FOR LEVEL INDICATOR. OLONG LIFE - SOLID STATE RELIABILITY. ORoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF1526 REV NO: V.1 DATE: MAR/24/2005 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101000522 Selection Guide Part No. Dice WP113GDT Iv (mcd) @ 10mA Lens Type GREEN (GaP) GREEN DIFFUSED Viewing Angle Min. Typ. 2θ1/2 1.8 5 110° Units Test Conditions Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength Green 565 nm IF=20mA λD Dominant Wavelength Green 568 nm IF=20mA ∆λ1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage -40°C To +85°C Operating/Storage Temperature Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF1526 REV NO: V.1 DATE: MAR/24/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101000522 Green WP113GDT Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1526 REV NO: V.1 DATE: MAR/24/2005 PAGE: 3 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101000522