T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: WP7104ALUP/2ID-0L High Efficiency Red Features Description z I.C. COMPATIBLE. The High Efficiency Red source color devices are made z BLACK CASE ENHANCES CONTRAST RATIO. with Gallium Arsenide Phosphide on Gallium Phosphide z WIDE VIEWING ANGLE. Orange Light Emitting Diode. z HIGH RELIABILITY LIFE MEASURED IN YEARS. z HOUSING MATERIAL: PPA. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH3814 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1102009882 Selection Guide Part No. Dice WP7104ALUP/2ID-0L Iv (mcd) [2] @ 10mA Lens Type High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Min. Typ. 2θ1/2 8 20 40° RED DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=10mA High Efficiency Red 625 nm IF=10mA Spectral Line Half-width High Efficiency Red 45 nm IF=10mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 1.9 2.5 V IF=10mA IR Reverse Current High Efficiency Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3814 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1102009882 High Efficiency Red WP7104ALUP/2ID-0L SPEC NO: DSAH3814 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1102009882 WP7104ALUP/2ID-0L Tape Specifications (Units : mm) SPEC NO: DSAH3814 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1102009882 PACKING & LABEL SPECIFICATIONS WP7104ALUP/2ID-0L SPEC NO: DSAH3814 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1102009882