T-1 (3mm) SOLID STATE LAMP Part Number: WP7104GD14V Green Features Description z LOW POWER CONSUMPTION. The Green source color devices are made with Gallium z POPULAR T-1 DIAMETER PACKAGE. Phosphide Green Light Emitting Diode. z GENERAL PURPOSE LEADS z RELIABLE AND RUGGED. z LONG LIFE - SOLID STATE RELIABILITY. z AVAILABLE ON TAPE AND REEL. z 14V INTERNAL RESISTOR. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2300 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101008152 Selection Guide Part No. Dice WP7104GD14V Lens Type Green (GaP) GREEN DIFFUSED Iv (mcd) [2] V= 14V Viewing Angle [1] Min. Typ. 2θ1/2 8 20 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm VF=14V Green 568 nm VF=14V Spectral Line Half-width Green 30 nm VF=14V IF Forward Current Green 10.5 13.5 mA VF=14V IR Reverse Current Green 10 uA VR = 5V Note: 1.Wavelength: +/-1nm. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 160 mW Forward Voltage 16 V Reverse Voltage 5 V Operating Temperature -40°C To +70°C Storage Temperature -40°C To +85°C Lead Solder Temperature [1] 260°C For 3 Seconds Lead Solder Temperature [2] 260°C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAF2300 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101008152 Green WP7104GD14V SPEC NO: DSAF2300 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101008152 PACKING & LABEL SPECIFICATIONS WP7104GD14V SPEC NO: DSAF2300 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101008152 SPEC NO: DSAF2300 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101008152 SPEC NO: DSAF2300 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101008152