7.6mmX7.6mm SUPER FLUX LED LAMP Part Number: WP76761CSYC SUPER BRIGHT YELLOW Features Description zSUPER FLUX OUTPUT. The Super Bright Yellow device is made with DH InGaAlP zDESIGN FOR HIGH CURRENT OPERATION. (on GaAs substrate) light emitting diode chip. zOUTSTANDING MATERIAL EFFICIENCY. zRELIABLE AND RUGGED. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG9480 REV NO: V.1 DATE: NOV/04/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007182 Selection Guide Dice Part No. WP76761CSYC Iv (mcd) [2] @ 20mA *70mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) Min. Typ. 380 800 *1500 *2700 Viewing Angle [1] 2 θ 1/2 20° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 70mA under 40ms pulse width; Luminous intensity / luminous flux: +/-15%. 3.Drive current between 10mA and 30mA are recommended for long term performance. 4.Operation at current below 10mA is not recommended. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Units Test Conditions λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA λD [1] Dominant Wavelength Super Bright Yellow 588 nm IF=20mA Δλ1/2 Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz V IF=20mA uA VR = 5V VF [2] IR Forward Voltage Reverse Current Min. Super Bright Yellow Typ. Max. 1.6 1.8 1.8 2.0 2.0 2.2 2.2 2.4 2.4 2.6 Super Bright Yellow 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG9480 REV NO: V.1 DATE: NOV/04/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007182 Super Bright Yellow WP76761CSYC SPEC NO: DSAG9480 REV NO: V.1 DATE: NOV/04/2006 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007182 PACKING & LABEL SPECIFICATIONS WP76761CSYC WP76761Cxxx SPEC NO: DSAG9480 REV NO: V.1 DATE: NOV/04/2006 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007182