7.6mmX7.6mm SUPER FLUX LED LAMP WP7676CSYC Features SUPER BRIGHT YELLOW Description SUPER FLUX OUTPUT. The Super Bright Yellow device is made with DH DESIGN FOR HIGH CURRENT OPERATION. InGaAlP (on GaAs substrate) light emitting diode chip. OUTSTANDING MATERIAL EFFICIENCY. RELIABLE AND RUGGED. RoHS COMPLIANT. UV RATED EPOXY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2277 REV NO: V.1 DATE:APR/15/2005 PAGE: 1 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1101007272 Selection Guide Part No. Dice WP7676CSYC Iv (mcd) @ 20mA *70mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) Min. Typ. 180 400 *280 *700 WATER CLEAR Viewing Angle 2 θ 1/2 70° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 70mA under 40ms pulse width. 3.Drive current between 10mA and 30mA are recommended for long term performance. 4.Operation at current below 10mA is not recommended. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 588 nm IF=20mA Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2277 REV NO: V.1 DATE:APR/15/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1101007272 Super Bright Yellow WP7676CSYC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2277 REV NO: V.1 DATE:APR/15/2005 PAGE: 3 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:B.H.LI ERP: 1101007272