SnapLED PRELIMINARY SPEC Technical Data Part Number: WP7701C4SYC/J Features: Benefits: *HIGH LUMINANCE OUTPUT. *Rugged Lighting Products. *DESIGN FOR HIGH CURRENT OPERATION. *SOLDERLESS MOUNTING TECHNIQUE. *Electricity savings. *LOW POWER CONSUMPTION. *Maintenance savings. *LOW THERMAL RESISTANCE. *Environmental Conformance. *LOW PROFILE. *PACKAGED IN TUBES FOR USE WITH AUTOMATIC INSERTION EQUIPMENT. *RoHS COMPLIANT. Typical Applications: *Automotive Exterior Lighting. *Solid State Lighting and Signaling. SPEC NO: DSAH3835 REV NO: V.1 DATE: APR/29/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1101018958 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH3835 REV NO: V.1 DATE: APR/29/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1101018958 Absolute Maximum Ratings at TA=25°C PARAMETER SY/J UNITS DC Forward Current 70 mA Power dissipation 245 mW Reverse Voltage 5 V Operating Temperature -40 To +85 °C Storage Temperature -55 To +85 °C Selection Guide Part No. Iv(cd)[1] @70mA Min. Typ. Viewing Angle[2] 2θ1/2 Typ. 3.3 4.7 50° LED COLOR WP7701C4SYC/J Super Bright Yellow (AlGaInP) Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity / luminous flux: +/-15%. 2.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=70mA Rθj-a=200°C/W DEVICE TYPE SY/J PEAK WAVELENGTH λPEAK (nm) TYP. DOMINANT[1] WAVELENGTH λDOM (nm) TYP. SPECTRAL LINE WAVELENGTH Δλ1/2(nm) TYP. 590 589 20 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25°C DEVICE TYPE SY/J FORWARD VOLTAGE [1] VF (VOLTS) @ IF=70mA REVERSE CURRENT IR (uA) @ VR=5V CAPACITANCE C (pF) @ VF=0V F=1MHZ THERMAL RESISTANCE Rθj -pin °C/W MIN. TYP. MAX. MAX. TYP. TYP. 2.6 2.9 3.5 10 45 125 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAH3835 REV NO: V.1 DATE: APR/29/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1101018958 Figures SPEC NO: DSAH3835 REV NO: V.1 DATE: APR/29/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1101018958 PACKING & LABEL SPECIFICATIONS WP7701C4SYC/J SPEC NO: DSAH3835 REV NO: V.1 DATE: APR/29/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1101018958