SUPER FLUX LED LAMP PRELIMINARY SPEC Part Number: WP7679C1SYC/J Technical Data Features: Benefits: *High Luminance output. *Outstanding Material Efficiency. *Design for High Current Operation. *Electricity savings. *Uniform Color. *Maintenance savings. *Low Power Consumption. *Reliable and Rugged. *Low Thermal Resistance. *Low Profile. *Packaged in tubes for use with automatic insertion equipment. *RoHS Compliant. Typical Applications: *Automotive Exterior Lighting. *Electronic Signs and Signals. *Specialty Lighting. SPEC NO: DSAG4895 REV NO: V.2 DATE: MAR/28/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1101016868 Outline Drawings Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. Absolute Maximum Ratings at TA=25°C PARAMETER SY/J UNITS DC Forward Current 70 mA Power dissipation 245 mW Reverse Voltage 5 V Operating Temperature -40 To +85 °C Storage Temperature -55 To +85 °C Lead Solder Temperature[1] 260°C For 5 Seconds 1.1.5mm[0.06inch]below seating plane. SPEC NO: DSAG4895 REV NO: V.2 DATE: MAR/28/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1101016868 Selection Guide Part No. Iv(cd)[1] @70mA Min. Typ. Viewing Angle[2] 2 1/2 Typ. 2.2 4.5 70° LED COLOR WP7679C1SYC/J TS InGaAlP YELLOW Notes: 1.Luminous intensity is measured with an integrating sphere after the device has stabilized; Luminous Intensity/ Luminous Flux: +/-15%. 2. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Optical Characteristics at TA=25°C IF=70mA R j-a=200°C/W DEVICE TYPE SY/J PEAK WAVELENGTH λPEAK (nm) TYP. DOMINANT[1] WAVELENGTH λDOM (nm) TYP. SPECTRAL LINE WAVELENGTH ∆λ1/2(nm) TYP. 590 589 20 Note: 1.The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device; Wavelength: +/-1nm. Electrical Characteristics at TA=25°C FORWARD VOLTAGE VF(VOLTS) [1] DEVICE @ IF=70mA TYPE SY/J REVERSE CURRENT IR (uA) @ VR=5V CAPACITANCE C (pF) @ VF=0V F=1MHZ THERMAL RESISTANCE R j-pin °C/W MIN. TYP. MAX. MAX. TYP. TYP. 2.6 2.9 3.5 10 45 125 Note: 1. Forward Voltage: +/-0.1V. SPEC NO: DSAG4895 REV NO: V.2 DATE: MAR/28/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1101016868 Figures SPEC NO: DSAG4895 REV NO: V.2 DATE: MAR/28/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1101016868 PACKING & LABEL SPECIFICATIONS WP7679C1SYC/J SPEC NO: DSAG4895 REV NO: V.2 DATE: MAR/28/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1101016868