LTR REVISION DATE A 12-09-05 CHIP MATERIAL LENS COLOR EMISSION COLOR GaInN WATER CLEAR WARM WHITE Notes: ATTENTION 1. ALL DIMS ARE IN MILLIMETERS (INCHES). 2. TOLERANCE IS ±0.25mm (±.010") UNLESS OTHERWISE SPECIFIED. 3. PROTRUDED RESIN UNDER FLANGE IS 1.0mm (.04") MAX. 4. LEAD SPACING IS MEASURED WHERE LEADS EMERGE FROM THE PACKAGE. 5. LEADS TO BE SOLDERABLE AND CAPABLE OF MEETING THE SOLDERABILITY REQUIREMENTS OF MIL-STD-202, METHOD 208. 6. MANUFACTURE DATE SHALL NOT BE OLDER THAN 26 WEEKS (6 MONTHS). -PROPRIETARYThis document contains Proprietary information of LEDTRONICS, INC. It may not be copied, used or disclosed for any purpose without the prior express written consent of LEDTRONICS, INC. R ELECTROSTATIC SENSITIVE DEVICES TITLE L200-0WW-40D TM TM TM .XXX ± .010 23105 KASHIWA COURT TORRANCE, CA 90505 OBSERVE PRECAUTIONS FOR HANDLING- .XX ± .025 ANGLES ± 0°,30' FRACT. ± 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) SCALE DWG NO DSDC311 CODE IDENT NO. 8Z410 DWG BY JG SHEET 2:1 CHK BY 1 OF 3 QA MNFG DATE 06-16-03 CUSTOMER APPD RM LTR REVISION DATE A 12-09-05 Absolute Maximum Ratings at Ta 25°C Param eter MAX. Unit Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 120 mW 100 mA Continuous Forward Current 30 mA Derating Linear From 50°C 0.4 mA/°C Reverse Voltage 5 V Operating Temperature Range 150 -40°C to +80°C Storage Temperature Range -40°C to +100°C Electrostatic Discharge (ESD) V 260°C for 5 Seconds Lead Soldering Temperature [4mm (.157 ) From Body] Electrical Optical Characteristics at Ta=25°C Parameter Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity Iv 2000 2500 3000 m cd If =20mA (Note 1) 45 50 55 Deg (Note 2) 2 Viewing Angle Forward Voltage Vf 2.8 3.5 4.0 V If=20mA Reverse Current IR --- --- 100 uA VR=5V SCP --- --- --- --- --- --- Lumens --- --- --- --- --- --- Radiant Intensity --- --- --- --- uW/sr --- Color Rank Lower Left x y 0.27 0.29 0.30 0.33 BIN C BIN D Notes: 1/2 Bin Limits (CIE1931x, y coordinates) Lower Right Upper Right x x y y 0.30 0.27 0.28 0.24 0.33 0.31 0.30 0.27 Upper Left x y 0.25 0.26 0.27 0.29 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. 1/2 is the off-axis at which the luminous intensity is half the axial luminous intensity. -PROPRIETARYThis document contains Proprietary TM information of LEDTRONICS, INC. It may not be copied, used or disclosed for any purpose without the prior express TM written consent of LEDTRONICS, INC. R TM .XXX ± .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX ± .025 ANGLES ± 0°,30' FRACT. ± 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) TITLE L200-0WW-40D DWG NO SCALE DSDC311-A CODE IDENT NO. 8Z410 DWG BY RM SHEET NTS CHK BY 2 QA OF 3 MNFG DATE 12-09-05 CUSTOMER APPD RM REVISION LTR Typical Electrical / Optical Characteristics Curves DATE A APPD 12-09-05 (25°C Ambient Temperature Unless Otherwise Noted) RM Spectral Radiance 10 Normalized Response 08 CIE 1931 Chromaticity Diagram 0.40 06 04 0.35 02 0.30 Y D 0.25 00 420 3 80 460 5 00 C 540 580 6 20 660 7 40 700 780 Wavelength (nm) 0.20 0.15 0.15 0.20 0.25 0.30 0.35 Forward Current vs. Forward voltage 0.40 30 Forward Current If (mA) X Relative Intensity (LOP@20mA=1) Relative Luminous Intensity vs. Forward Current 2 25 20 15 10 5 1 0 2 .75 2.5 3.0 3.25 3.5 3.75 Forward Voltage Vf (V) 0 0 5 0 15 20 25 30 Forward Current vs. Derating curve 35 60 Forward Current If (mA) Forward Current If (mA) Forward Current vs. Chromaticity Coordinates 0.28 Ta = 25°C 1mA 50 40 30 20 10 0.27 5mA 0 0 10mA 10 20 40 30 50 60 70 80 90 Derating Curve Ta (°C) y 0.26 20mA Beam Pattern 30mA 0.25 0° -30° 30° 40mA 0.24 0.25 0.26 0.27 0.28 60° -60° 0.29 x 90° -90° 1.0 0.8 0.6 0.4 0.2 0.2 0.4 0.6 0.8 1.0 Relative Intensity (LO P@M AX=1) -PROPRIETARYThis document contains Proprietary information of LEDTRONICS, INC. It may not be copied, used or disclosed for any purpose without the prior express written consent of LEDTRONICS, INC. R TITLE L200-0WW-40D TM TM DWG NO SCALE SHEET DATE TM .XXX ± .010 23105 KASHIWA COURT TORRANCE, CA 90505 .XX ± .025 ANGLES ± 0°,30' FRACT. ± 1/32 TOLERANCE PER ANSI-Y14.5 (UNLESS OTHERWISE STATED) DSDC311-B CODE IDENT NO. 8Z410 DWG BY RM NTS CHK BY 3 QA OF 3 MNFG 12-09-05 CUSTOMER