HPWGN510 SnapLED Six LED MultiFunction Signal Technical Data DS10 Using Lumileds’ patented solderless clinch technology and SnapLED emitters, this sixLED round assembly is an integrated LED signal solution complete with control circuitry. By using two input terminals, the signal may switch between two brightness modes. The product features a compact and rugged design and provides a cost effective source for Benefits • Integrated LED Solution for Turn/Tail/Stop Applications • Life of Vehicle Light Source • Standard Design for Multiple Vehicle Applications • Rugged and Compact vehicle TurnTailStop lamps. Features Drive Circuitry and Connector Pins Included • Compact, Low Profile Package • Light Source Sufficient for SAE/ECE/JIS Stop/Tail Requirements • Optical & Electrical Characteristics [1,2,3] Part Number LED Color Voltage (V) Total flux ΦV (lm) Min. Max. Mode Power Consumption (W) Max. Min. Stop 39.5 81.3 2.8 3.5 Tail 3.7 7.8 0.19 0.23 Stop 41.8 86.1 3.3 4.1 Tail 4.1 8.6 0.22 0.25 12.8 HPWG-N510 RedOrange 13.5 Color Characteristics Part Number HPWG-N510 Dominant Wavelength[1,2] λd (nm) Min. Max. 611 Notes: 1. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the signal. 2. The dominant wavelength does not vary between emitters by more than 8nm within the same assembly. 634 Circuit Schematic SnapLED Six LED Multi-Function Signal 2 Notes: 1. φv is the total steady state flux of the assembly after thermal stabilization. 2. The thermal resistance assumed is Rth-junction-ambient=12.9°C/W, which represents the thermal resistance of the LED assembly when the substrate is potted in epoxy resin. To determine junction temperature, multiply Rth by power consumption and add to ambient temperature. 3. No LED emits more than 2 times the flux of any other LED within the same assembly. Document #: DS10 (06/24/03) Outline Drawing Notes: 1. See SnapLED 150 datasheet for emitter (HPWS-TH00) specifications. 2. Dimensions are in millimeters. 3. Dimensions without tolerances are nominal. SnapLED Six LED Multi-Function Signal 3 Document #: DS10 (06/24/03) Absolute Maximum Ratings Parameter DC Input Operating Voltage[1] Power Dissipation (Stop) Power Dissipation (Stop) Reverse Voltage (Stop & Tail) Operating Temperature Range[2] Operating Temperature Range[2] Operating Temperature Range[2] Storage Temperature Range LED Junction Temperature SnapLED Six LED Multi-Function Signal HPWG-N510 Units 16 3.5 (@12.8V) 4.1 (@13.5V) 500 (@IR = 200 µA) -40 to +85 (@12.8V) -40 to +85 (@13.5V) -40 to +25 (@15.5V) -55 to +100 125 4 V W W V °C °C °C °C °C Document #: DS10 (06/24/03) Notes: 1. 16V operation is allowed at Tambient=25°C only. 2. Temperature range for sustained operation based on Rth-junction=12.9°C/W. ambient Company Information Lumileds is a worldclass supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Lumileds has R&D development centers in San Jose, California and Best, The Netherlands. Production capabilities in San Jose, California and Malaysia. Lumileds is pioneering the highflux LED technology and bridging the gap between solidstate LED technology and the lighting world. Lumileds is absolutely dedicated to bringing the best and brightest LED technology to enable new applications and markets in the Lighting world. Lumileds may make process or materials changes affecting the performance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. LUMILEDS www.luxeon.com www.lumileds.com For technical assistance or the location of your nearest Lumileds sales office, call: Worldwide: +1 408-435-6044 US Toll free: 877-298-9455 Asia: 60 4680 5342 Europe: +31 499 339 439 Fax: 408-435-6855 Email us at [email protected] 2003 Lumileds Lighting U.S. LLC. All rights reserved. Lumileds Lighting is a joint venture between Agilent Technologies and Philips Lighting. Luxeon is a trademark of Lumileds Lighting. Product specifications are subject to change without notice. SnapLED Six LED Multi-Function Signal 5 Document #: DS10 (06/24/03) Lumileds Lighting, U.S. LLC 370 West Trimble Road San Jose, CA 95131