HPWGN500 HPWGN506 HPWGN501 HPWGN507 HPWGN502 HPWGN508 HPWGN503 HPWGN550 HPWGN504 HPWGN551 HPWGN505 HPWGN552 SnapLED High Mount Stop Light Array Technical Data DS29 Using Lumiled's patented solderless clinch technology and SnapLED emitters, this sixLED linear assembly is an integrated LED stoplamp solution complete with control circuitry. In addition to three types of power connector, the HMSL product line offers vehicle designers a choice of three flux output levels for use on exterior mounts or for implementation behind the rear glass. Furthermore, Benefits • Cost effective LED Solution for HMSL Applications • Life of Vehicle Light Source • Standard Design for Multiple Vehicle Applications • Rugged and Compact SnapLED offers two radiation pattern options for use where greater luminous intensity is required. Where enhanced reliability is needed, high voltage protection circuitry is provided. SnapLED HMSL features a compact and rugged design and provides a cost effective source for vehicle highmountstop lamps. SnapLED High Mount Stop Light Array (09/01/02) Document #: DS29 Features • Drive Circuitry and Connector Included • Choice of connector type • Light Source Sufficient for SAE/ECE/JIS HMSL Requirements Selection Guide (all lamps are TS AlInGaP Red-Orange and voltage is 12.8 volts) Part Number Description HPWG-N500 HPWG-N501 HPWG-N502 HPWG-N503 HPWG-N504 HPWG-N505 HPWG-N506 HPWG-N507 HPWG-N508 HPWG-N550 HPWG-N551 HPWG-N552 HMSL with pin connector HMSL with pin connector HMSL with pin connector HMSL with varistor & hole connector HMSL with varistor & hole connector HMSL with varistor & hole connector HMSL with wire connector HMSL with wire connector HMSL with wire connector HMSL with narrow angle light beam HMSL with narrow angle light beam HMSL with narrow angle light beam Total flux ΦV (lm)[1,2] Min. Max. Power Input (W) Min. Max. 19.0 28.0 36.0 19.0 28.0 36.0 19.0 28.0 36.0 19.0 28.0 36.0 1.6 3.1 3.1 1.6 3.1 3.1 1.6 3.1 3.1 1.6 3.1 3.1 30.0 45.0 58.0 30.0 45.0 58.0 30.0 45.0 58.0 30.0 45.0 58.0 1.9 3.5 3.5 1.9 3.5 3.5 1.9 3.5 3.5 1.9 3.5 3.5 Circuit Schematic SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Notes: 1. Total integrated flux of the array at Vin = 12.8 V, Rth junction-ambient = 12.9°C/W, which assumes that the array is attached to a thermally absorbing substrate. To determine junction temperature, multiply Rth by power consumption and add to ambient temperature. 2. ΦV is the total usable flux measured after the lamp has stabilized Outline Drawing Notes: 1. See HPWS-TH00 or HPWT-TH00 datasheet for emitter specifications. 2. Dimensions are in millimeters (inches). 3. Dimensions without tolerances are nominal. Side View SnapLED High Mount Stop Light Array (09/01/02) Document #: DS29 Absolute Maximum Ratings at TA = 25°C HPWG-N5xx Parameter Units [1] DC Input Operating Voltage 16 Power Dissipation 7.0 500 Reverse Voltage (IR = 200 μA) Operating Temperature Range(12.8V-13.5V) [2] -40 to +85 Storage Temperature Range -55 to +100 LED Junction Temperature 125 High Temperature Chamber 125 (2 hrs.) V W V °C °C °C °C Notes: 1. 16V operation is allowed at Tambient=25°C only. 2. Temperature range for sustained operation based on Rth-junctionambient=12.9°C/W. Optical and Electrical Characteristics Device type HPWG-N50x Operational Forward Voltage VF (Volts) Min. Max. 9 16 Color Dominant Wavelength λd (nm) [1,2] Min. Max. 611 634 Notes: 1. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 2. The dominant wavelength does not vary between emitters by more than 8nm within the same assembly. SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Company Information Lumileds is a worldclass supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Lumileds has R&D development centers in San Jose, California and Best, The Netherlands. Production capabilities in San Jose, California and Malaysia. Lumileds is pioneering the highflux LED technology and bridging the gap between solidstate LED technology and the lighting world. Lumileds is absolutely dedicated to bringing the best and brightest LED technology to enable new applications and markets in the Lighting world. Lumileds may make process or materials changes affecting the performance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. LUMILEDS www.luxeon.com www.lumileds.com For technical assistance or the location of your nearest Lumileds sales office, call: Worldwide: +1 408-435-6044 US Toll free: 877-298-9455 Europe: +31 499 339 439 Fax: 408-435-6855 Email us at [email protected] ©2002 Lumileds Lighting. All rights reserved. Lumileds Lighting is a joint venture between Agilent Technologies and Philips Lighting. Luxeon is a trademark of Lumileds Lighting, LLC. Product specifications are subject to change without notice. SnapLED High Mount Stop Light Array Document #: DS29 (09/01/02) Lumileds Lighting, LLC 370 West Trimble Road San Jose, CA 95131