MX23L12810 128M-BIT (8M x 16) MASK ROM (SOP ONLY) FEATURES • Bit organization - 8M x 16 (word mode) • Fast access time - Random access: 100ns (max.) • Current - Operating:50mA - Standby:15uA • Supply voltage - 3.0~3.6V • Package - 44 pin SOP (500mil) • Temperature - 0 ~ 70° C PIN CONFIGURATION PIN DESCRIPTION A21 A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE VSS OE D0 D8 D1 D9 D2 D10 D3 D11 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 MX23L12810 44 SOP(For Word Mode Only) 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 A20 A19 A8 A9 A10 A11 A12 A13 A14 A15 A16 A22 VSS D15 D7 D14 D6 D13 D5 D12 D4 VCC Symbol Pin Function A0~A22 Address Inputs D0~D15 Data Outputs CE Chip Enable Input OE Output Enable Input VCC Power Supply Pin VSS Ground Pin NC No Connection ORDER INFORMATION Part No. P/N:PM0750 Access Time Package MX23L12810MC-10 100ns 44 pin SOP MX23L12810MC-12 120ns 44 pin SOP MX23L12810MC-15 150ns 44 pin SOP REV. 1.9, FEB. 17, 2005 1 MX23L12810 ABSOLUTE MAXIMUM RATINGS Item Symbol Ratings Supply Voltage Relative to VSS VCC -0.3V to 4.3V Voltage on any Pin Relative to VSS VIN -1.3V to VCC + 2V (Note) Ambient Operating Temperature Storage Temperature Topr Tstg 0° C to 70° C -65° C to 125° C Note: Minimum DC voltage on input or I/O pins is -0.5V. During voltage transitions, inputs may undershoot VSS to 1.3V for periods of up to 20ns. Maximum DC voltage on input or I/O pins is VCC+0.5V. During voltage transitions, input may overshoot VCC to VCC+2.0V for periods of up to 20ns. DC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V~3.6V) Item Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Input Leakage Current Output Leakage Current Operating Current Standby Current (TTL) Standby Current (CMOS) Input Capacitance Output Capacitance Symbol VOH VOL VIH VIL ILI ILO ICC1 ISTB1 ISTB2 CIN COUT MIN. 2.4V 2.2V -0.3V - MAX. 0.4V VCC+0.3V 0.2 x VCC 5uA 5uA 50mA 1mA 15uA 10pF 10pF Conditions IOH = -0.4mA IOL = 1.6mA 0V, VCC 0V, VCC f=5MHz, all outputs open CE = VIH CE>VCC-0.2V Ta = 25° C, f = 1MHZ Ta = 25° C, f = 1MHZ AC CHARACTERISTICS (Ta = 0° C ~ 70° C, VCC = 3.0V~3.6V) Item Symbol Read Cycle Time Address Access Time Chip Enable Access Time Output Enable Time Output Hold After Address Output High Z Delay tRC tAA tACE tOE tOH tHZ 23L12810-10 MIN. MAX. 100ns 100ns 100ns 30ns 0ns 20ns 23L12810-12 MIN. MAX. 120ns 120ns 120ns 50ns 0ns 20ns 23L12810-15 MIN. MAX. 150ns 150ns 150ns 70ns 0ns 20ns Note: Output high-impedance delay (tHZ) is measured from OE or CE going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. P/N:PM0750 REV. 1.9, FEB. 17, 2005 2 MX23L12810 AC Test Conditions Input Pulse Levels Input Rise and Fall Times Input Timing Level Output Timing Level Output Load 0.4V~2.4V 10ns 1.4V 1.4V See Figure IOH (load)=-0.4mA DOUT IOL (load)=1.6mA C<100pF Note:No output loading is present in tester load board. Active loading is used and under software programming control. Output loading capacitance includes load board's and all stray capacitance. TIMING DIAGRAM RANDOM READ ADD ADD ADD ADD tRC tACE CE tOE OE tOH tAA DATA VALID VALID P/N:PM0750 tHZ VALID REV. 1.9, FEB. 17, 2005 3 MX23L12810 PACKAGE INFORMATION P/N:PM0750 REV. 1.9, FEB. 17, 2005 4 MX23L12810 REVISION HISTORY Revision # 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Description Modify Current Operating:60mA-->40mA Modify ICC1:60mA-->40mA, f=5MHz, all outputs open Del ICC2 Modify Current Operating:40mA-->50mA Modify ICC1:40mA-->50mA Add Access Time:90/100/120ns Add Temperature:0~70° C Modify Supply voltage:3.4V±0.2-->3.0V~3.6V Modify Package Information 1. Add supply voltage relative to VSS 2. Change voltage on any pin relative to VSS:-0.5V to VCC+2.0 1. To modify Package Information 1. Added notes in Absolute Maximum ratings 1. Modify VIN: -0.5V to VCC + 2V --> -1.3V to VCC + 2V (Note) 1. Removed access time:90ns P/N:PM0750 Page P1 P2 P2 P1 P2 P1,2 P1 P1,2 P4 P2 P2 P4 P2 P2 P1,2 Date DEC/12/2000 DEC/14/2000 AUG/28/2001 FEB/01/2002 JUL/19/2002 NOV/20/2002 DEC/03/2002 DEC/10/2002 FEB/17/2005 REV. 1.9, FEB. 17, 2005 5 MX23L12810 MACRONIX INTERNATIONAL CO., LTD. Headquarters: TEL:+886-3-578-6688 FAX:+886-3-563-2888 Europe Office : TEL:+32-2-456-8020 FAX:+32-2-456-8021 Hong Kong Office : TEL:+86-755-834-335-79 FAX:+86-755-834-380-78 Japan Office : Kawasaki Office : TEL:+81-44-246-9100 FAX:+81-44-246-9105 Osaka Office : TEL:+81-6-4807-5460 FAX:+81-6-4807-5461 Singapore Office : TEL:+65-6346-5505 FAX:+65-6348-8096 Taipei Office : TEL:+886-2-2509-3300 FAX:+886-2-2509-2200 MACRONIX AMERICA, INC. TEL:+1-408-262-8887 FAX:+1-408-262-8810 http : //www.macronix.com MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.