ML78L00-FBL1* SERIES 3-TERMINAL POSITIVE VOLTAGE REGULATOR The ML78L00-FBL1* series of 3-Terminal Positive Voltage Regulators. These regulators employ internal current-limiting and thermal-shutdown, making them essentially indestructible. If adequate heat sinking is provided, they can deliver up to 100mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or oncard regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The ML78L00-FBL1 series used as a zener diode/resistor combination replacement, offers an effective output impedance improvement of typically two orders of magnitude, along with lower quiescent current and lower noise. * FBL1 menas lead free compoent. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Input Voltage VIN Output Current Power Dissipation Io PD Topr Tstg Operating Temperature Range Storage Temperature Range MAXIMUM RATINGS (ML78L05A to ML78L10A) 30 (ML78L12A to ML78L18A) 35 (ML78L24A) 40 100 500 -40 to +85 -40 to +150 (Ta=25℃) UNIT ■ Package Outline TO-92 V 1. OUT 2. GND 3. IN mA mW ℃ ℃ 1 2 ELECTRICAL CHARACTERISTICS PARAMETER ML78L05A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Cofficient of Output Voltage Ripple Rejection Output Noise Voltage ML78L06A Output Voltage Line Regulation 1 Line Regulation 2 Load Regulation 1 Load Regulation 2 Quiescent Current Average Temperature Cofficient of Output Voltage Ripple Rejection Output Noise Voltage SYMBOL 3 (Tj=25℃,CIN=0.33μF,Co=0.1μF) Measurement is to be conducted is pulse testing. TEST CONDITIONS MIN. TYP. MAX. UNIT VIN=8V to 20V Io=40mA VIN=10V Io=1 to 40mA VIN=10V Io=1 to 100mA VIN=10V Io=0mA 4.75 - ΔVo / ΔT VIN=10V Io=1mA - 0.4 - mV/℃ 41 - 49 42 - dB μV 6.0 3.9 6.3 175 125 40 80 6 V mV mV mV mV mA Vo ΔVo Vin 1 ΔVo Vin 2 ΔVo Io 1 ΔVo Io 2 IQ RR VNO VIN=10V Io=40mA VIN=7V to 20V Io=40mA 8V<VIN<18V Io=40mA VIN=10V BW=10Hz to 100KHz VIN=11V Io=40mA VIN=8V to 20V Io=40mA ein=1Vp-p f=120Hz Io=40mA 5.0 3.8 5.25 150 100 30 60 6 V mV mV mV mV mA VIN=9V to 20V Io=40mA VIN=11V Io=1 to 40mA VIN=11V Io=1 to 100mA VIN=11V Io=0mA 5.7 - ΔVo / ΔT VIN=11V Io=1mA - 0.5 - mV/℃ 40 - 48 46 - dB μV Vo ΔVo Vin 1 ΔVo Vin 2 ΔVo Io 1 ΔVo Io 2 IQ RR VNO 9V<VIN<19V Io=40mA VIN=11V BW=10Hz to 100KHz ein=1Vp-p f=120Hz Io=40mA Jun-05 Sheet 1 of 5 ELECTRICAL CHARACTERISTICS (Tj=25℃,CIN=0.33μF,Co=0.1μF) Measurement is to be conducted is pulse testing. PARAMETER TEST CONDITIONS SYMBOL MIN. TYP. MAX. UNIT ML78L08A Output Voltage Line Regulation 1 VIN=14V Vo ΔVo Vin 1 VIN=10.5V to 23V Line Regulation 2 ΔVo Vin 2 VIN=11V to 23V Io=40mA 7.6 8.0 8.4 V Io=40mA - - 175 mV Io=40mA - - 125 mV Load Regulation 1 ΔVo Io 1 VIN=14V Io=1 to 40mA - - 40 mV Load Regulation 2 ΔVo Io 2 VIN=14V Io=1 to 100mA - - 80 mV Io=0mA - 4.0 6 mA Io=1mA - 0.6 - mV/℃ f=120Hz 37 46 - dB Io=40mA - 54 - μV Quiescent Current IQ Average Temperature ΔVo / ΔT VIN=14V Cofficient of Output Voltage 13V<VIN<23V Ripple Rejection RR Io=40mA Output Noise Voltage VIN=14V ein=1Vp-p VNO VIN=14V BW=10Hz to 100KHz Vo VIN=16V Io=40mA 8.55 9.0 9.45 V ML78L09A Output Voltage Line Regulation 1 ΔVo Vin 1 VIN=12V to 24V Io=40mA - - 175 mV Line Regulation 2 ΔVo Vin 2 VIN=13V to 24V Io=40mA - - 125 mV - 40 mV Load Regulation 1 ΔVo Io 1 VIN=16V Io=1 to 40mA - Load Regulation 2 ΔVo Io 2 VIN=16V Io=1 to 100mA - - 90 mV Io=0mA - 4.1 6 mA Io=1mA - 0.65 - mV/℃ f=120Hz 38 45 - dB Io=40mA - 58 - μV Io=40mA 9.5 10.0 10.5 V Io=40mA - - 175 mV VIN=16V Quiescent Current IQ Average Temperature ΔVo / ΔT VIN=16V Cofficient of Output Voltage 15V<VIN<25V Ripple Rejection RR Io=40mA Output Noise Voltage BW=10Hz to 100KHz VNO VIN=16V ein=1Vp-p ML78L10A Output Voltage Line Regulation 1 VIN=17V Vo ΔVo Vin 1 VIN=13V to 25V Line Regulation 2 ΔVo Vin 2 VIN=14V to 25V Io=40mA - - 125 mV Load Regulation 1 ΔVo Io 1 VIN=17V Io=1 to 40mA - - 40 mV Load Regulation 2 ΔVo Io 2 VIN=17V Io=1 to 100mA - - 90 mV Io=0mA - 4.2 6 mA Io=1mA - 0.7 - mV/℃ f=120Hz 37 44 - dB Io=40mA - 62 - μV Quiescent Current IQ Average Temperature ΔVo / ΔT VIN=17V Cofficient of Output Voltage 15V<VIN<25V Ripple Rejection RR Io=40mA Output Noise Voltage VIN=17V ein=1Vp-p VNO VIN=17V BW=10Hz to 100KHz Vo VIN=19V Io=40mA 11.4 12.0 12.6 V ML78L12A Output Voltage Line Regulation 1 ΔVo Vin 1 VIN=14.5V to 27V Io=40mA - - 250 mV Line Regulation 2 ΔVo Vin 2 VIN=16V to 27V Io=40mA - - 200 mV - 50 mV Load Regulation 1 ΔVo Io 1 VIN=19V Io=1 to 40mA - Load Regulation 2 ΔVo Io 2 VIN=19V Io=1 to 100mA - - 100 mV Io=0mA - 4.3 6.5 mA Io=1mA - 0.9 - mV/℃ f=120Hz 37 42 - dB Io=40mA - 70 - μV VIN=19V Quiescent Current IQ Average Temperature ΔVo / ΔT VIN=19V Cofficient of Output Voltage 15V<VIN<25V Ripple Rejection RR Io=40mA Output Noise Voltage BW=10Hz to 100KHz VNO VIN=19V ein=1Vp-p Sheet 2 of 5 ELECTRICAL CHARACTERISTICS (Tj=25℃,CIN=0.33μF,Co=0.1μF) Measurement is to be conducted is pulse testing. PARAMETER TEST CONDITIONS SYMBOL MIN. TYP. MAX. UNIT ML78L15A VIN=23V Vo ΔVo Vin 1 VIN=17.5V to 30V Io=40mA 14.25 15.0 15.75 V Line Regulation 1 Io=40mA - - 300 mV Line Regulation 2 ΔVo Vin 2 VIN=19V to 30V Io=40mA - - 250 mV Io=1 to 40mA - - 75 mV Output Voltage Load Regulation 1 ΔVo Io 1 Load Regulation 2 ΔVo Io 2 VIN=23V Quiescent Current Average Temperature Cofficient of Output Voltage Ripple Rejection Output Noise Voltage VIN=23V Io=1 to 100mA - - 150 mV VIN=23V Io=0mA - 4.6 6.5 mA ΔVo / ΔT VIN=23V Io=1mA - 1 - mV/℃ IQ RR 18.5V<VIN<28.5V Io=40mA VNO VIN=23V BW=10Hz to 100KHz Vo VIN=26V f=120Hz 34 39 - dB Io=40mA - 82 - μV Io=40mA 17.1 18.0 18.9 V ein=1Vp-p ML78L18A Output Voltage Line Regulation 1 ΔVo Vin 1 VIN=20.5V to 33V Io=40mA - - 360 mV Line Regulation 2 ΔVo Vin 2 VIN=22V to 33V Io=40mA - - 300 mV - 90 mV Load Regulation 1 ΔVo Io 1 VIN=26V Io=1 to 40mA - Load Regulation 2 ΔVo Io 2 VIN=26V Io=1 to 100mA - - 180 mV IQ VIN=26V Io=0mA - 4.7 6.5 mA ΔVo / ΔT VIN=26V Io=1mA - 1.1 - mV/℃ f=120Hz 32 36 - dB Io=40mA - 89 - μV Quiescent Current Average Temperature Cofficient of Output Voltage Ripple Rejection Output Noise Voltage RR 21.5V<VIN<31.5V Io=40mA VNO VIN=26V BW=10Hz to 100KHz Vo VIN=32V ein=1Vp-p ML78L24A Io=40mA 22.8 24.0 25.2 V Line Regulation 1 ΔVo Vin 1 VIN=26.5V to 39V Io=40mA - - 480 mV Line Regulation 2 ΔVo Vin 2 VIN=29V to 39V Io=40mA - - 400 mV Io=1 to 40mA - - 120 mV Io=1 to 100mA - - 240 mV VIN=32V Io=0mA - 4.8 6.5 mA ΔVo / ΔT VIN=32V Io=1mA - 1.4 - mV/℃ Output Voltage Load Regulation 1 ΔVo Io 1 Load Regulation 2 ΔVo Io 2 VIN=32V Quiescent Current Average Temperature Cofficient of Output Voltage Ripple Rejection Output Noise Voltage IQ VIN=32V RR 27.5V<VIN<37.5V Io=40mA VNO VIN=32V BW=10Hz to 100KHz ein=1Vp-p f=120Hz 30 33 - dB Io=40mA - 97 - μV Sheet 3 of 5 Sheet 4 of 5 78L05 / L24 Quiescent Current vs. Output Current (Tj = 25° C) Quiescent Current I Q (mA) 5.4 5.2 5.0 4.8 78L24 VIN =32V 78L05 VIN =10V 4.6 4.4 4.2 4.0 3.8 3.6 0 20 40 60 80 100 Output Current Io(mA) 78L05 Quiescent Current vs. Input Voltage (Io = 0mA, Tj = 25° C) Quiescent Current I Q (mA) 5 4 3 2 1 0 10 20 30 40 Input Voltage VIN (V) Sheet 5 of 5