MIMIX CGB7001-SP-0G0T

DC-6.0 GHz InGaP HBT Packaged
Matched Gain Block Amplifier
March 2007 - Rev 20-Mar-07
CGB7001-SP
Functional Block Diagram (SOT-86)
Features
Low Operating Voltage: 5V
27.8 dBm Output IP3 @ 850 MHz
3.2 dB Noise Figure @ 850 MHz
20.2 dB Gain @ 850 MHz
14.0 dBm P1dB @ 850 MHz
Low Performance Variation Over Temperature
100% DC On-Wafer Testing
ESD Protection on All Die: >1000V HBM
Low Thermal Resistance: <150ºC/Watt
Ground
4
Input
1
3
Output
Bias
2
Ground
Absolute Maximum Ratings
Max Device Voltage
Max Device Current
Max Device Dissipated Power
RF Input Power
Storage Temperature
Junction Temperature
Operating Temperature
Thermal Resistance
EDS (HBM)
Description
The CGB7001-SP is a Darlington Configured, high dynamic range,
utility gain block amplifier. Designed for applications operating
within the 0.1 to 6.0 GHz frequency range, Mimix’s broadband,
cascadable, gain block amplifiers are ideal solutions for transmit,
receive and IF applications.
These MMIC amplifiers are available in bare die form or an
industry standard SOT-86 package. Mimix's InGaP HBT
technology and an industry low thermal resistance offers a
thermally robust and reliable gain block solution.
+5.5 V
110 mA
0.45 W
+17 dBm
-55ºC to 150ºC
150ºC
-40ºC to +85ºC
150º C/W
1000 V
Operation of this device above any of these parameters may cause
permanent damage.
The InGaP HBT die have extra pads to enable thorough DC
testing. This unique test capability and the inclusion of ESD
protection on all die, significantly enhances the quality, reliability
and ruggedness of these products.
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
Cellular, PCS, GSM, UMTS
Wireless Data and SATCOM
Transmit and Receive Functions
With a single bypass capacitor, optional RF choke and two DC
blocking capacitors, this gain block amplifier offers significant
ease of use in a broad range of applications.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Small Signal Gain
Output P1dB
Output IP3
Noise Figure
Operating Current
Input Return Loss
Output Return Loss
Pout @ -45 dBc, ACP
IS-95, 9 Forward Channels
Temperature (ºC)
Min.
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
19.2
18.9
13.0
11.0
26.3
24.8
32
28
11
10
13
12
850 MHz
Typ.
Max.
20.2
20.2
14.0
14.0
27.8
27.8
3.2
3.2
35
35
15
15
18
18
10.0
10.0
21.2
21.5
4.0
4.4
38
42
Notes: 1. Test Conditions in Mimix eval board, Vs = 5 V, Id = 35 mA Typ., Rbias = 27
2. Values reflect performance in recommended application circuit.
Min.
15.7
15.4
12.4
11.2
25.8
25.3
32
28
9.0
8.5
12
11
1950 MHz
Typ.
Max.
16.7
16.7
13.4
13.4
27.3
27.3
3.4
3.4
35
35
12.5
12.5
17
17
10.0
10.0
, Zs = Zl = 50
17.7
18.0
4.2
4.6
38
42
Min.
14.4
14.1
11.5
11.0
24.4
23.9
32
28
8.5
8.0
11.5
10.5
2400 MHz
Typ.
Max.
15.4
15.4
12.5
12.5
25.9
25.9
3.6
3.6
35
35
12
12
16.5
16.5
16.4
16.7
4.4
4.8
38
42
Min.
3500 MHz
Typ.
13.0
13.0
10.2
10.2
22.4
22.4
3.8
3.8
35
35
15
15
20
20
Max.
Units
dB
dB
dBm
dBm
dBm
dBm
dB
dB
mA
mA
dB
dB
dB
dB
dBm
dBm
, OIP3 tone spacing = 1 MHz, Pout per tone = 3 dBm.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-6.0 GHz InGaP HBT Packaged
Matched Gain Block Amplifier
March 2007 - Rev 20-Mar-07
CGB7001-SP
Typical S-Parameter and Noise Performance
|S21| Vs Frequency
-5
25 C
-40 C
85 C
-10
25 C
-40 C
85 C
|S11| (dB)
|S21| (dB)
|S11| Vs Frequency
22
20
18
16
14
12
10
8
-15
-20
-25
0
1
2
3
4
5
0
6
1
2
Frequency (GHz)
4
5
6
|S22| Vs Frequency
|S12| Vs Frequency
-15
-5
|S22| (dB)
-17
|S12| (dB)
3
Frequency (GHz)
-19
-21
25 C
-40 C
85 C
-23
-25
25 C
-40 C
85 C
-10
-15
-20
-25
0
1
2
3
4
Frequency (GHz)
5
6
0
1
2
3
4
5
6
Frequency (GHz)
Noise Figure Vs Frequency
Noise Figure (dB)
5
25 C
-40 C
85 C
4.5
4
3.5
3
2.5
0
0.5
1
1.5
2
2.5
3
3.5
Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-6.0 GHz InGaP HBT Packaged
Matched Gain Block Amplifier
March 2007 - Rev 20-Mar-07
CGB7001-SP
Typical Power and Linearity Performance
P1dB Vs Frequency
OIP3 Vs Frequency
16
30
25 C
-40 C
85 C
25 C
-40 C
85 C
28
12
OIP3 (dBm)
P1dB (dBm)
14
10
8
6
26
24
22
4
1 MHz separation, 3 dBm/tone
20
0
1
2
3
4
5
6
0
0.5
1
1.5
2
2.5
3
3.5
4
Frequency (GHz)
Frequency (GHz)
Linearity Performance - Base Station ACP – IS-95
Alt1 Ch. Pwr @ 850 MHz Vs Pout
9 Channels Forward, 1.98 MHz Offset
30 kHz BW
ACP @ 850 MHz Vs Pout
9 Channels Forward, 750 kHz Offset
30 kHz BW
-30
25 C
-40 C
85 C
-40
ACP (dBc)
ACP (dBc)
-35
-45
-50
-55
-60
-2
0
2
4
6
8
10
-55
-60
-65
-70
-75
-80
-85
-90
25 C
-40 C
85 C
-2
12
0
2
Pout (dBm)
6
8
10
12
Alt1 Ch. Pwr @ 1950 MHz Vs Pout
9 Channels Forward, 1.25 MHz Offset
12.5 kHz BW
-40
25 C
-40 C
85 C
25 C
-40 C
85 C
-50
ACP (dBc)
ACP (dBc)
ACP @ 1950 MHz Vs. Pout
9 Forward Channels, 885 kHz Offset
30 kHz BW
-35
-40
-45
-50
-55
-60
-65
-70
-75
4
Pout (dBm)
-60
-70
-2
0
2
4
6
8
Pout (dBm)
10
12
-80
-2
0
2
4
6
8
10
12
Pout (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-6.0 GHz InGaP HBT Packaged
Matched Gain Block Amplifier
March 2007 - Rev 20-Mar-07
CGB7001-SP
Typical Scattering Parameters (Vd = +4.1V, Icc = 36 mA, T = 23°C, device in a 50 ohm system)
Frequency
(MHz)
100
200
300
400
500
600
700
800
900
1000
1200
1400
1600
1800
2000
2200
2400
2600
2800
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
5000
5200
5400
5600
5800
6000
6500
7000
7500
8000
8500
9000
9500
10000
(Mag)
0.132
0.133
0.135
0.137
0.139
0.141
0.143
0.145
0.147
0.149
0.153
0.156
0.159
0.162
0.163
0.165
0.167
0.168
0.169
0.170
0.171
0.172
0.172
0.172
0.171
0.170
0.168
0.167
0.165
0.163
0.160
0.158
0.155
0.154
0.152
0.151
0.158
0.171
0.191
0.221
0.251
0.283
0.313
S11
(Ang)
-2
-4
-6
-9
-11
-14
-17
-20
-23
-27
-33
-40
-47
-54
-60
-67
-74
-80
-87
-93
-99
-106
-113
-120
-126
-133
-140
-147
-154
-162
-169
-177
175
166
157
134
109
83
60
38
18
1
-15
(Mag)
12.40
12.26
12.08
11.85
11.58
11.28
10.95
10.62
10.28
9.94
9.27
8.63
8.05
7.52
7.04
6.61
6.23
5.88
5.58
5.30
5.06
4.84
4.64
4.46
4.29
4.14
4.01
3.88
3.76
3.66
3.56
3.47
3.39
3.31
3.24
3.08
2.95
2.83
2.72
2.61
2.49
2.37
2.23
S21
(Ang)
173
166
159
153
147
140
134
129
123
118
107
98
89
81
73
65
58
51
44
37
31
24
18
12
6
0
-6
-12
-18
-24
-30
-36
-42
-47
-53
-68
-83
-98
-113
-129
-145
-161
-178
(Mag)
0.065
0.065
0.066
0.066
0.067
0.068
0.069
0.070
0.072
0.073
0.077
0.081
0.085
0.090
0.094
0.099
0.104
0.109
0.114
0.119
0.125
0.130
0.135
0.141
0.146
0.151
0.156
0.161
0.166
0.171
0.175
0.180
0.185
0.189
0.194
0.204
0.214
0.223
0.230
0.236
0.239
0.239
0.238
S12
(Ang)
1
2
3
4
5
6
6
7
7
8
8
8
8
7
6
4
3
1
-2
-4
-6
-9
-12
-15
-18
-21
-24
-27
-31
-34
-38
-41
-45
-48
-52
-61
-71
-81
-91
-102
-113
-124
-135
(Mag)
S22
0.156
0.155
0.154
0.152
0.150
0.147
0.144
0.141
0.138
0.135
0.128
0.123
0.118
0.113
0.109
0.106
0.103
0.100
0.099
0.097
0.097
0.098
0.098
0.099
0.101
0.103
0.105
0.108
0.111
0.115
0.120
0.126
0.131
0.139
0.146
0.171
0.203
0.241
0.283
0.333
0.385
0.440
0.497
(Ang)
-8
-14
-21
-28
-35
-42
-48
-54
-60
-66
-76
-86
-95
-104
-113
-120
-128
-134
-141
-148
-154
-160
-167
-174
180
173
166
159
153
145
138
131
124
117
110
93
77
60
45
30
16
2
-11
S-Parameter Data Files are available on-line at: www.mimixbroadband.com
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-6.0 GHz InGaP HBT Packaged
Matched Gain Block Amplifier
March 2007 - Rev 20-Mar-07
CGB7001-SP
Application Circuit
Note: This schematic represents the topology of the application circuit recommended by Mimix.
R Bias = (Vs - Vd) / Id
Vd
R1
C3
4
uuuu
Vs
L1
1
RF IN
C1
Ref Designator
C1, C2
C3
Value
1000 pF
1.0 F
L1
R1
C4
56 nH
RF OUT
3
C2
2
Description
MCH185A101JK
VITR 1.0 F 25V CER
CAP 0805 X7R 10%
Coilcraft 0603 CS 10%
R B ia s = ( V s - V d) / Id
DNP ( Do Not P la ce)
Size
0805
0805
0603
0805 / 1206 / 1210
N/A
MIMIX
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-6.0 GHz InGaP HBT Packaged
Matched Gain Block Amplifier
March 2007 - Rev 20-Mar-07
CGB7001-SP
Physical Dimensions - SP Package (SOT-86)
0.53 ±0.10
[0.021 ±0.004]
2.16 ±0.127
0.085 ±0.005
0° – 8°
45°
5.33 – 4.83
[0.210 – 0.190]
PIN 1
2.67 ±0.13
[0.105 ±0.005]
4.59 – 5.46
[0.195 – 0.215]
2.54 ±0.13
[0.100 ±0.005]
(3X)
1.52 ±0.127
0.060 ±0.005
7° (2X)
0.66 ±1.3
[0.026 ±0.005]
0.15 [0.060]
SEATING PLANE
0.94 ±0.25
[0.037 ±0.010]
DIMENSIONS IN MILLIMETERS
[INCHES]
0.81 ±0.25
[0.032 ±0.010]
(3X)
0.05 [0.002]
+0.051 [0.0020]
-0.038 [0.0015]
TOLERANCE: .XX ±0.51 [0.02]
.XXX ±0.51 [0.02]
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-6.0 GHz InGaP HBT Packaged
Matched Gain Block Amplifier
March 2007 - Rev 20-Mar-07
CGB7001-SP
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
CGB7001-SP-0G00
CGB7001-SP-0G0T
PB-CGB7001-SP-0000
Description
SOT-86 surface mount package in bulk
SOT-86 surface mount package in tape and reel
Evaluation Board with SMA connectors for CGB7001-SP
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 7 of 7
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.