DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier April 2007 - Rev 02-Apr-07 CGB7005-BD Features Chip Layout Low Operating Voltage: 5V 32.5 dBm Output IP3 @ 850 MHz 3.2 dB Noise Figure @ 850 MHz 21.0 dB Gain @ 850 MHz 17.6 dBm P1dB @ 850 MHz Low Performance Variation Over Temperature 100% DC On-Wafer Testing ESD Protection on All Die: >1000V HBM Low Thermal Resistance: <85ºC/Watt Absolute Maximum Ratings Max Device Voltage Max Device Current Max Device Dissipated Power RF Input Power Storage Temperature Junction Temperature Operating Temperature Thermal Resistance EDS (HBM) Description The CGB7005-BD is a Darlington Configured, high dynamic range, utility gain block amplifier. Designed for applications operating within the DC to 6.0 GHz frequency range, Mimix’s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and IF applications. These MMIC amplifiers are available in bare die form. Mimix's InGaP HBT technology and an industry low thermal resistance offers a thermally robust and reliable gain block solution. Small Signal Gain Output P1dB Output IP3 Noise Figure Operating Current Input Return Loss Output Return Loss Pout @ -45 dBc, ACP IS-95, 9 Forward Channels Temperature (ºC) Min. +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 20.0 19.7 16.6 16.3 31.0 30.5 59 54 14 13 15 14 850 MHz Typ. Max. 21.0 21.0 17.6 17.6 32.5 32.0 3.2 3.2 63 63 19 19 22 22 11 11 22.0 22.3 4.0 4.3 67 73 0.65 W +17 dBm -55ºC to 150ºC 150ºC -40ºC to +85ºC 85º C/W 1000 V Applications PA Driver Amp, IF Amp, LO Buffer Amp Cellular, PCS, GSM, UMTS Wireless Data and SATCOM Transmit and Receive Functions CATV With a single bypass capacitor, optional RF choke and two DC blocking capacitors, this gain block amplifier offers significant ease of use in a broad range of applications. Parameter 130 mA Operation of this device above any of these parameters may cause permanent damage. The InGaP HBT die have extra pads to enable thorough DC testing. This unique test capability and the inclusion of ESD protection on all die, significantly enhances the quality, reliability and ruggedness of these products. Typical Performance +6.0 V Min. 1950 MHz Typ. Max. 17.2 16.9 16.2 15.9 29.0 28.5 59 54 14 13 13.5 12.5 Notes: 1. Performance in Mimix eval board, Vs = 5 V, Id = 63 mA Typ., Rbias = 15 , Zs = Zl = 50 2. Values reflect performance in recommended application circuit. 3. Only on-wafer DC test is done. Devices are not tested for RF performance. 18.2 18.2 17.2 17.2 30.5 30.5 3.2 3.2 63 63 18 18 17.5 17.5 11 11 19.2 19.5 4.0 4.3 67 73 Min. 15.7 15.4 15.6 15.3 28.0 27.5 59 54 13 12 16 15 2400 MHz Typ. Max. 16.9 16.9 16.6 16.6 29.5 29.5 3.3 3.3 63 63 17.5 17.5 20 20 Min. 3500 MHz Typ. 18.1 18.4 15.5 14.3 27.0 4.1 4.4 67 73 3.3 63 14.5 17 Max. Units dB dB dBm dBm dBm dBm dB dB mA mA dB dB dB dB dBm dBm , OIP3 tone spacing = 1 MHz, Pout per tone = 3 dBm. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier April 2007 - Rev 02-Apr-07 CGB7005-BD Typical S-Parameter and Noise Performance Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier April 2007 - Rev 02-Apr-07 CGB7005-BD Typical Power and Linearity Performance P1dB Vs Frequency OIP3 Vs Frequency 18 34 16 32 14 OIP3 (dBm) P1dB (dBm) 25 C -40 C 85 C 12 25 C -40 C 85 C 30 28 10 1 MHz separation, 3 dBm/tone 8 26 0 1 2 3 4 5 Frequency (GHz) 6 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) Linearity Performance - Base Station ACP – IS-95 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier April 2007 - Rev 02-Apr-07 CGB7005-BD Typical Scattering Parameters (Vd = +4.15V, Icc = 61 mA, T = 23°C, device in a 50 ohm system) Frequency (MHz) 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 S11 (Mag) 0.052 0.053 0.055 0.057 0.059 0.062 0.065 0.068 0.072 0.076 0.080 0.084 0.089 0.093 0.098 0.103 0.108 0.114 0.118 0.123 0.129 0.134 0.140 0.145 0.150 0.154 0.159 0.164 0.168 0.173 0.177 0.182 0.186 0.190 0.194 0.198 0.201 0.204 0.207 0.209 0.210 0.211 0.211 0.212 0.212 0.212 0.211 0.211 0.212 0.213 S21 (Ang) -175.5 -171.0 -166.7 -163.2 -159.2 -156.1 -154.1 -152.3 -150.2 -149.3 -148.1 -147.4 -146.8 -146.5 -146.4 -146.2 -146.5 -146.9 -147.6 -148.2 -149.2 -150.1 -151.5 -153.0 -154.4 -156.2 -157.8 -159.9 -162.2 -164.4 -166.8 -169.2 -172.1 -175.1 -178.1 178.8 175.4 171.9 167.8 163.9 159.7 155.5 150.6 145.6 140.3 135.1 129.6 123.6 116.9 110.0 Continues Next Page. (Mag) 13.02 12.90 12.78 12.62 12.42 12.22 11.99 11.74 11.49 11.23 10.96 10.69 10.42 10.15 9.89 9.63 9.37 9.12 8.88 8.66 8.43 8.21 8.01 7.81 7.62 7.44 7.26 7.10 6.95 6.80 6.66 6.53 6.40 6.28 6.16 6.04 5.94 5.83 5.74 5.64 5.55 5.47 5.38 5.31 5.23 5.15 5.08 5.01 4.95 4.88 S12 (Ang) 173.10 166.30 159.70 153.20 146.80 140.40 134.20 128.10 122.10 116.20 110.40 104.70 99.16 93.72 88.40 83.15 78.00 72.94 68.02 63.14 58.30 53.57 48.91 44.30 39.74 35.26 30.84 26.47 22.12 17.78 13.53 9.26 5.01 0.76 -3.47 -7.68 -11.84 -16.02 -20.19 -24.33 -28.49 -32.64 -36.80 -40.98 -45.18 -49.35 -53.55 -57.75 -62.01 -66.31 (Mag) 0.064 0.064 0.064 0.065 0.066 0.066 0.067 0.068 0.069 0.070 0.072 0.073 0.075 0.076 0.078 0.080 0.081 0.083 0.085 0.087 0.089 0.091 0.093 0.095 0.097 0.099 0.101 0.104 0.106 0.108 0.110 0.113 0.115 0.118 0.120 0.123 0.125 0.128 0.130 0.133 0.136 0.138 0.141 0.143 0.146 0.149 0.151 0.154 0.157 0.159 (Ang) -0.61 -0.60 -0.41 -0.96 -1.24 -1.66 -2.21 -2.57 -3.15 -3.91 -4.69 -5.51 -6.44 -7.43 -8.49 -9.71 -10.91 -12.28 -13.63 -15.04 -16.65 -18.25 -19.90 -21.54 -23.31 -25.10 -26.97 -28.90 -30.88 -32.88 -34.89 -37.02 -39.14 -41.47 -43.64 -45.97 -48.32 -50.68 -53.13 -55.53 -58.04 -60.60 -63.20 -65.80 -68.52 -71.22 -73.90 -76.77 -79.70 -82.64 (Mag) S22 (Ang) 0.023 0.029 0.037 0.045 0.053 0.062 0.069 0.076 0.083 0.089 0.095 0.098 0.102 0.105 0.108 0.109 0.111 0.112 0.113 0.113 0.113 0.112 0.112 0.111 0.110 0.109 0.108 0.107 0.107 0.106 0.105 0.105 0.105 0.105 0.105 0.104 0.104 0.105 0.105 0.106 0.107 0.109 0.111 0.114 0.118 0.123 0.128 0.135 0.144 0.154 -158.3 -143.9 -136.8 -134.6 -134.0 -135.2 -138.0 -140.2 -143.1 -146.3 -149.6 -152.7 -155.7 -158.8 -161.7 -164.6 -167.3 -170.0 -172.5 -175.3 -177.7 179.9 177.5 175.2 172.7 170.5 168.1 165.7 163.2 160.7 158.2 155.4 152.4 149.2 146.0 142.8 138.8 134.5 130.0 125.3 120.0 114.3 108.4 101.7 95.0 88.66 82.32 75.66 68.93 62.13 S-Parameter Data Files are available online at: www.mimixbroadband.com Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier April 2007 - Rev 02-Apr-07 CGB7005-BD Typical Scattering Parameters (Vd = +4.15V, Icc = 61 mA, T = 23°C, device in a 50 ohm system) Frequency (MHz) 5100 5200 5300 5400 5500 5600 5700 5800 5900 6000 6100 6200 6300 6400 6500 6600 6700 6800 6900 7000 7100 7200 7300 7400 7500 7600 7700 7800 7900 8000 8100 8200 8300 8400 8500 8600 8700 8800 8900 9000 9100 9200 9300 9400 9500 9600 9700 9800 9900 10000 S11 S21 (Mag) (Ang) 0.214 0.215 0.217 0.221 0.226 0.232 0.240 0.249 0.259 0.271 0.286 0.300 0.315 0.331 0.349 0.368 0.386 0.404 0.421 0.440 0.459 0.477 0.493 0.508 0.524 0.540 0.555 0.567 0.579 0.589 0.601 0.612 0.621 0.628 0.634 0.640 0.647 0.654 0.656 0.658 0.660 0.663 0.666 0.668 0.667 0.666 0.666 0.668 0.668 0.665 103.30 96.45 89.12 81.08 73.02 65.24 57.44 49.53 41.22 33.24 25.66 18.46 11.28 4.04 -2.90 -9.33 -15.29 -21.22 -27.17 -33.06 -38.62 -43.70 -48.72 -53.83 -58.82 -63.55 -68.01 -72.18 -76.35 -80.64 -84.73 -88.46 -91.94 -95.33 -98.91 -102.50 -105.90 -108.90 -111.80 -114.90 -118.10 -121.30 -124.10 -126.70 -129.40 -132.30 -135.20 -137.90 -140.20 -142.40 (Mag) 4.81 4.75 4.69 4.63 4.56 4.50 4.44 4.38 4.30 4.23 4.16 4.08 4.01 3.93 3.84 3.75 3.67 3.58 3.49 3.39 3.29 3.20 3.11 3.01 2.91 2.82 2.72 2.63 2.54 2.46 2.37 2.28 2.20 2.13 2.06 1.98 1.92 1.85 1.79 1.73 1.68 1.62 1.57 1.52 1.47 1.43 1.38 1.34 1.29 1.26 S12 (Ang) (Mag) -70.61 -74.87 -79.25 -83.69 -88.08 -92.47 -96.98 -101.60 -106.10 -110.70 -115.30 -119.90 -124.50 -129.20 -133.90 -138.50 -143.10 -147.70 -152.30 -156.90 -161.40 -165.80 -170.30 -174.70 -179.00 176.70 172.50 168.50 164.40 160.30 156.40 152.60 148.90 145.30 141.60 137.90 134.40 131.00 127.60 124.30 120.90 117.50 114.30 111.10 107.90 104.80 101.60 98.51 95.57 92.60 0.162 0.164 0.167 0.169 0.172 0.174 0.176 0.178 0.179 0.181 0.182 0.183 0.184 0.184 0.185 0.185 0.185 0.184 0.183 0.182 0.180 0.179 0.177 0.175 0.173 0.170 0.168 0.165 0.163 0.160 0.157 0.154 0.152 0.149 0.147 0.144 0.141 0.138 0.136 0.134 0.132 0.129 0.127 0.125 0.123 0.121 0.119 0.117 0.115 0.113 (Ang) (Mag) S22 (Ang) -85.61 -88.60 -91.68 -94.88 -98.04 -101.20 -104.60 -108.00 -111.40 -114.80 -118.30 -121.80 -125.30 -128.90 -132.50 -136.10 -139.60 -143.20 -146.80 -150.40 -153.90 -157.40 -160.80 -164.20 -167.70 -170.90 -174.10 -177.30 179.60 176.60 173.50 170.60 167.80 165.00 162.20 159.30 156.70 154.30 151.90 149.40 146.80 144.40 142.10 139.80 137.40 135.10 132.70 130.50 128.40 126.40 0.163 0.172 0.186 0.200 0.215 0.229 0.246 0.264 0.284 0.304 0.325 0.346 0.367 0.389 0.412 0.434 0.455 0.476 0.496 0.518 0.538 0.557 0.574 0.591 0.608 0.624 0.639 0.652 0.664 0.676 0.688 0.699 0.709 0.717 0.724 0.731 0.738 0.744 0.748 0.753 0.757 0.761 0.765 0.769 0.770 0.773 0.776 0.778 0.780 0.782 55.60 49.58 43.71 37.34 31.12 25.49 20.26 14.56 8.86 3.61 -1.54 -6.54 -11.43 -16.17 -20.99 -25.65 -30.14 -34.47 -38.81 -43.21 -47.40 -51.69 -55.75 -59.68 -63.66 -67.57 -71.29 -74.92 -78.40 -81.79 -85.25 -88.48 -91.59 -94.63 -97.60 -100.50 -103.40 -106.20 -108.70 -111.40 -114.00 -116.40 -118.90 -121.40 -123.60 -126.00 -128.30 -130.50 -132.70 -134.80 S-Parameter Data Files are available online at: www.mimixbroadband.com Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier April 2007 - Rev 02-Apr-07 CGB7005-BD Application Circuit Note: This schematic represents the topology of the application circuit recommended by Mimix. R Bias = (Vs - Vd) / Id Recommended Bias Resistor Values for ID = 63 mA Rbias (1/4W) Rbias (1/2W) 5V 15 — 7V 47 — 8V — 63 Note: Rbias provides DC bias stability over temperature. 10V Vd R1 — 4 94 L1 1 RF IN C1 Physical Dimensions C3 uuuu Supply Voltage (Vs) Vs 3 RF OUT C2 2 Ref Designator C1, C2 C3 Value 1000 pF 1.0 F L1 R1 56 nH R B ia s = ( V s - V d) / Id Bonding Configuration Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT MMIC Matched Gain Block Amplifier April 2007 - Rev 02-Apr-07 CGB7005-BD Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ESD - Gallium Arsenide (GaAs) devices are susceptible to electrostatic and mechanical damage. Die are supplied in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded anti-static workstation. Devices need careful handling using correctly designed collets, vacuum pickups or, with care, sharp tweezers. Die Attachment - GaAs Products from Mimix Broadband are 0.100 mm (0.004") thick. Microstrip substrates should be brought as close to the die as possible. The mounting surface should be clean and flat. If using conductive epoxy, recommended epoxies are Tanaka TS3332LD, Die Mat DM6030HK or DM6030HK-Pt cured in a nitrogen atmosphere per manufacturer's cure schedule. Apply epoxy sparingly to avoid getting any on to the top surface of the die. An epoxy fillet should be visible around the total die periphery. For additional information please see the Mimix "Epoxy Specifications for Bare Die" application note. Wire Bonding - Windows in the surface passivation above the bond pads are provided to allow wire bonding to the die's gold bond pads. The recommended wire bonding procedure uses Gold 0.025 mm (0.001") diameter ball bonds. Aluminum wire should be avoided. Thermo-compression bonding is recommended though thermosonic bonding may be used providing the ultrasonic content of the bond is minimized. Bond force, time and ultrasonics are all critical parameters. Bonds should be made from the bond pads on the die to the package or substrate. All bonds should be as short as possible. Part Number for Ordering CGB7005-BD-000V Description RoHS compliant die packed in vacuum release gel paks Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.