MIMIX CGB7017

DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Features
Functional Block Diagram (SOT-89)
Low Operating Voltage: 5V
33.8 dBm Output IP3 @ 850 MHz
3.3 dB Noise Figure @ 850 MHz
23.1 dB Gain @ 850 MHz, 19.5 dB @ 6 GHz
18.2 dBm P1dB @ 850 MHz
Low Performance Variation Over Temperature
Low Cost: Die Form or SOT-89 Package
100% DC On-Wafer Testing
ESD Protection on All Die: >1000V HBM
Low Thermal Resistance: <100ºC/Watt
Ground
4
1
Input
2
3
Ground Output
Bias
Absolute Maximum Ratings
Max Device Voltage
Max Device Current
Max Device Dissipated Power
RF Input Power
Storage Temperature
Junction Temperature
Operating Temperature
Thermal Resistance
EDS (HBM)
Description
The CGB7017-SC (-BD) is a Darlington Configured, high dynamic
range, utility gain block amplifier. Designed for applications
operating within the DC to 8.0 GHz frequency range, Mimix’s
broadband, cascadable, gain block amplifiers are ideal solutions
for transmit, receive and IF applications.
These MMIC amplifiers are available in bare die form or an
industry standard SOT-89 package. Mimix's InGaP HBT
technology and an industry low thermal resistance offers a
thermally robust and reliable gain block solution.
+6.0 V
130 mA
0.65 W
+17 dBm
-55ºC to 150ºC
150ºC
-40ºC to +85ºC
85º C/W
1000 V
Operation of this device above any of these parameters may cause
permanent damage.
The InGaP HBT die have extra pads to enable thorough DC
testing. This unique test capability and the inclusion of ESD
protection on all die, significantly enhances the quality, reliability
and ruggedness of these products.
Applications
PA Driver Amp, IF Amp, LO Buffer Amp
Cellular, PCS, GSM, UMTS
Wireless Data and SATCOM
Transmit and Receive Functions
CATV
With a single bypass capacitor, optional RF choke and two DC
blocking capacitors, this gain block amplifier offers significant
ease of use in a broad range of applications.
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture.
Parameter
Small Signal Gain
Output P1dB
Output IP3
Noise Figure
Operating Current
Input Return Loss
Output Return Loss
Pout @ -45 dBc, ACP
IS-95, 9 Forward Channels
Temperature (ºC)
Min.
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
+25
-40 to +85
22.1
22.0
17.2
16.9
32.3
31.8
65
59
11
10
16
15
850 MHz
Typ.
Max.
23.1
23.1
18.2
18.2
33.8
33.8
3.3
3.3
70
70
15
15
23
23
12
12
24.1
24.2
4.1
4.5
75
79
Min.
21.0
20.9
16.7
16.3
31.4
30.9
65
59
11
10
11
10
Notes: 1. Test Conditions in Mimix eval board, Vs = 5 V, Id = 70 mA Typ., Rbias = 10
2. Values reflect performance in recommended application circuit.
1950 MHz
Typ.
Max.
22.0
22.0
17.7
17.7
32.9
32.9
3.6
3.6
70
70
16
16
16
16
12
12
23.0
23.1
4.4
4.8
75
79
, Zs = Zl = 50
Min.
20.8
20.7
16.7
16.3
30.2
29.7
65
59
11
10
11
10
2400 MHz
Typ.
Max.
21.8
21.8
17.7
17.7
31.7
31.7
3.7
3.7
70
70
15
15
16
16
22.8
22.9
4.5
4.9
75
79
Min.
3500 MHz
Typ.
Max.
Min.
21.0
21.0
17.0
17.0
27.6
27.6
3.8
3.8
70
70
11
11
16
16
6000 MHz
Typ.
Max.
19.5
19.5
12.0
12.0
20.3
20.3
4.6
4.6
70
70
7.5
7.5
13
13
Units
dB
dB
dBm
dBm
dBm
dBm
dB
dB
mA
mA
dB
dB
dB
dB
dBm
dBm
, OIP3 tone spacing = 1 MHz, Pout per tone = 6 dBm.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Typical S-Parameter and Noise Performance
|S21| Vs Frequency
|S11| Vs Frequency
26
-4
25 C
-40 C
85 C
24
-8
20
|S11| (dB)
|S21| (dB)
22
25 C
-40 C
85 C
18
16
-12
-16
14
12
-20
0
1
2
3
4
5
6
7
8
0
1
2
4
5
6
7
8
6
7
8
Frequency (GHz)
Frequency (GHz)
|S22| Vs Frequency
|S12| Vs Frequency
-6
-18
25 C
-40 C
85 C
-20
25 C
-40 C
85 C
-10
|S22| (dB)
-22
|S22| (dB)
3
-24
-26
-14
-18
-22
-28
-26
-30
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
Frequency (GHz)
Frequency (GHz)
Noise Figure Vs Frequency
6.5
25 C
-40 C
85 C
6
Noise Figure (dB)
5.5
5
4.5
4
3.5
3
2.5
0
2
4
6
8
Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Typical Power and Linearity Performance
P1dB Vs Frequency
OIP3 Vs Frequency
20
38
25 C
-40 C
85 C
18
34
OIP3 (dBm)
P1dB (dBm)
16
14
25 C
-40 C
85 C
12
10
30
26
22
1 MHz separation,
6 dBm/tone
18
8
6
14
0
1
2
3
4
5
6
7
8
0
1
2
3
Frequency (GHz)
4
5
6
7
8
Frequency (GHz)
Linearity Performance - Base Station ACP – IS-95
Alt1 Ch. Pwr @ 850 MHz Vs Pout
9 Channels Forward, 1.98 MHz Offset, 30 kHz BW
ACP @ 850 MHz Vs Pout
9 Channels Forward, 750 kHz Offset, 30 kHz BW
-45
-30
25 C
-40 C
85 C
-40
25 C
-40 C
85 C
-55
ACP (dBc)
ACP (dBc)
-35
-45
-50
-65
-75
-55
-85
-60
4
8
12
16
4
20
8
ACP @ 1950 MHz Vs. Pout
9 Forward Channels, 885 kHz Offset
30 kHz BW
-25
-45
-55
-55
-65
-65
-75
4
8
12
Pout (dBm)
16
20
4
8
12
Pout (dBm)
16
20
Alt. Ch. Pwr @ 2140 MHz Vs Pout
WCDMA, 3GPP TM1, 1 Channel, 64 DPCH
ACP @ 2140 MHz Vs Pout
WCDMA, 3GPP TM1, 1 Channel, 64 DPCH
-40
-20
25 C
-40 C
85 C
-25
25 C
-40 C
85 C
-45
ACP (dBc)
-30
ACP (dBc)
20
25 C
-40 C
85 C
-45
ACP (dBc)
ACP (dBc)
16
Alt1 Ch. Pwr @ 1950 MHz Vs Pout
9 Channels Forward, 1.25 MHz Offset
12.5 kHz BW
-35
25 C
-40 C
85 C
-35
12
Pout (dBm)
Pout (dBm)
-35
-40
-50
-55
-45
-60
-50
-65
-55
4
8
12
Pout (dBm)
16
20
4
8
12
16
20
Pout (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Typical Scattering Parameters (Vd = +4.5V, Icc = 74 mA, T = 23°C, device in a 50 ohm system)
Frequency
(MHz)
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
S 11
S 21
S 12
S 22
(Mag)
(Ang)
(Mag)
(Ang)
(Mag)
(Ang)
0.039
0.043
0.051
0.058
0.066
0.075
0.084
0.094
0.103
0.113
0.122
0.131
0.140
0.148
0.156
0.164
0.172
0.181
0.190
0.197
0.204
0.211
0.218
0.225
0.231
0.237
0.243
0.248
0.254
0.260
0.265
0.269
0.274
0.279
0.285
0.289
0.293
0.296
0.299
0.303
0.306
0.307
0.308
0.309
0.310
0.312
0.313
0.312
0.313
0.314
-164
-152
-144
-140
-136
-134
-134
-134
-134
-134
-135
-136
-137
-139
-140
-142
-144
-145
-147
-149
-151
-153
-155
-157
-159
-162
-164
-167
-169
-171
-173
-176
-179
178
175
173
169
166
162
159
155
151
147
142
138
133
128
122
117
110
15.58
15.51
15.45
15.37
15.27
15.17
15.06
14.93
14.81
14.68
14.54
14.40
14.25
14.08
13.93
13.77
13.61
13.44
13.28
13.12
12.96
12.80
12.64
12.49
12.33
12.19
12.04
11.89
11.75
11.61
11.49
11.38
11.27
11.17
11.07
10.97
10.89
10.81
10.73
10.66
10.58
10.52
10.46
10.42
10.36
10.32
10.28
10.24
10.22
10.19
175
170
164
159
154
149
144
139
134
130
125
120
115
110
106
101
96
92
87
83
78
74
69
65
60
56
52
47
43
39
35
31
26
22
18
14
10
6
1
-3
-7
-11
-15
-20
-24
-28
-33
-37
-41
-46
0.054
0.055
0.055
0.055
0.055
0.055
0.055
0.056
0.056
0.057
0.057
0.057
0.058
0.059
0.059
0.060
0.060
0.061
0.062
0.062
0.063
0.064
0.065
0.065
0.066
0.067
0.068
0.069
0.070
0.070
0.072
0.073
0.074
0.075
0.076
0.077
0.078
0.079
0.080
0.082
0.083
0.084
0.086
0.087
0.089
0.090
0.091
0.093
0.095
0.096
-1
-2
-4
-5
-6
-7
-8
-10
-11
-12
-14
-15
-16
-18
-19
-21
-22
-24
-25
-27
-29
-30
-32
-34
-36
-37
-39
-41
-43
-45
-47
-49
-51
-53
-55
-57
-59
-61
-64
-66
-68
-70
-73
-75
-78
-80
-83
-86
-89
-91
Continues Next Page.
(Mag)
(Ang)
0.017
0.026
0.036
0.046
0.055
0.065
0.074
0.083
0.092
0.101
0.109
0.116
0.123
0.130
0.137
0.143
0.149
0.155
0.160
0.166
0.171
0.177
0.180
0.185
0.190
0.194
0.199
0.203
0.206
0.211
0.216
0.222
0.227
0.231
0.236
0.242
0.248
0.254
0.259
0.264
0.268
0.274
0.279
0.283
0.287
0.292
0.297
0.302
0.307
0.311
-130
-124
-120
-119
-119
-120
-122
-123
-124
-126
-128
-130
-132
-134
-136
-138
-140
-142
-144
-146
-147
-149
-151
-153
-154
-156
-158
-160
-162
-163
-165
-167
-169
-171
-173
-175
-178
179
176
174
171
168
164
160
157
153
149
145
140
135
S-Parameter Data Files are available online at: www.mimixbroadband.com
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Typical Scattering Parameters (Vd = +4.5V, Icc = 74 mA, T = 23°C, device in a 50 ohm system)
Frequency
(MHz)
5100
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
7100
7200
7300
7400
7500
7600
7700
7800
7900
8000
8100
8200
8300
8400
8500
8600
8700
8800
8900
9000
9100
9200
9300
9400
9500
9600
9700
9800
9900
10000
S 11
(Mag)
0.315
0.316
0.317
0.319
0.323
0.329
0.337
0.346
0.355
0.367
0.384
0.401
0.420
0.441
0.463
0.487
0.513
0.537
0.561
0.586
0.609
0.632
0.652
0.670
0.688
0.703
0.718
0.730
0.741
0.749
0.757
0.766
0.772
0.776
0.779
0.782
0.783
0.786
0.787
0.786
0.785
0.784
0.783
0.781
0.777
0.773
0.769
0.765
0.762
0.756
S 21
(Ang)
104
97
91
83
75
67
59
51
42
33
24
15
7
-2
-10
-19
-26
-34
-42
-49
-56
-63
-70
-76
-82
-88
-94
-99
-104
-109
-114
-119
-123
-128
-132
-136
-140
-144
-147
-151
-155
-158
-162
-165
-168
-171
-175
-178
179
176
S 12
S 22
(Mag)
(Ang)
(Mag)
(Ang)
(Mag)
(Ang)
10.15
10.13
10.11
10.08
10.05
10.03
9.99
9.96
9.90
9.84
9.76
9.66
9.56
9.43
9.29
9.13
8.93
8.73
8.50
8.27
8.00
7.72
7.44
7.17
6.88
6.59
6.31
6.02
5.76
5.50
5.24
5.00
4.75
4.53
4.33
4.13
3.93
3.75
3.58
3.42
3.27
3.13
2.99
2.86
2.74
2.62
2.51
2.41
2.31
2.21
-51
-55
-60
-65
-69
-74
-79
-84
-90
-95
-100
-106
-111
-117
-123
-128
-134
-140
-145
-151
-157
-162
-168
-173
-178
176
171
166
162
157
152
148
144
139
135
131
127
123
120
116
112
109
105
102
98
95
91
88
85
81
0.098
0.100
0.101
0.103
0.105
0.106
0.108
0.109
0.110
0.112
0.113
0.113
0.114
0.115
0.115
0.114
0.114
0.113
0.112
0.110
0.109
0.106
0.104
0.102
0.099
0.096
0.094
0.091
0.089
0.086
0.083
0.081
0.078
0.076
0.074
0.072
0.069
0.067
0.065
0.064
0.062
0.060
0.059
0.057
0.056
0.055
0.054
0.053
0.052
0.051
-94
-97
-100
-104
-107
-110
-114
-117
-121
-125
-129
-133
-137
-141
-145
-149
-153
-158
-162
-166
-170
-174
-178
178
174
170
167
163
160
157
153
151
148
145
142
139
137
134
132
130
128
126
123
121
119
117
115
113
112
110
0.314
0.319
0.324
0.330
0.335
0.341
0.347
0.354
0.361
0.369
0.378
0.386
0.397
0.408
0.421
0.435
0.448
0.462
0.477
0.492
0.505
0.518
0.531
0.542
0.554
0.565
0.575
0.584
0.592
0.599
0.607
0.613
0.619
0.625
0.629
0.633
0.638
0.642
0.644
0.647
0.650
0.652
0.654
0.656
0.658
0.660
0.661
0.663
0.664
0.665
130
125
120
114
108
101
95
88
81
73
66
58
51
43
35
27
19
12
4
-3
-11
-18
-25
-31
-38
-44
-49
-55
-60
-65
-70
-75
-80
-84
-88
-92
-95
-99
-103
-106
-109
-112
-115
-118
-121
-124
-127
-129
-132
-134
S-Parameter Data Files are available online at: www.mimixbroadband.com
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Application Circuit
Note: This schematic represents the topology of the application circuit recommended by Mimix.
Vd
R Bias = (Vs - Vd) / Id
Vs
Supply Voltage (V)
5V
Rbias (R1 Description: 1206 1/4W 1%) 10
Rbias (R1 Description: 1210 1/2W 1%)
—
7V
8V
10V
—
—
38
—
52
C4
R1
4
81
L1
1
RF IN
Note: Rbias provides DC bias stability over temperature.
C3
uuuu
Recommended Bias Resistor Values for ID = 78 mA
3
C1
C2
2
RF
OUT
Application Circuit for Flat Gain @ 2 to 6 GHz
Note: This schematic represents the topology of the application circuit recommended by Mimix.
Vd
R Bias = (Vs - Vd) / Id
Recommended Bias Resistor Values for ID = 78 mA
Rbias (R1 Description: 1206 1/4W 1%) 10
Rbias (R1 Description: 1210 1/2W 1%)
—
7V
38
—
8V
10V
—
—
52
C4
R1
4
81
3
C1
C2
2
Small Signal Gain (dB)
L3
C5
RF
OUT
R2
Typical Gain Performance
23
L2
1
RF IN
Note: Rbias provides DC bias stability over temperature.
C3
uuuu
5V
uuuu
Supply Voltage (V)
Vs
CGB7017-SC Gain Vs Temp and Frequency
22
21
-40C
25C
85C
20
19
18
17
0
1000
2000
3000
4000
5000
6000
Frequency (MHz)
Evaluation Board - SC Package (SOT-89)
Ref Designator
C1, C2, C3
C4
MIMIX
L1
L1
L3
R1
R2
C4
Value Description
1000 pF MCH185A101JK
1.0 F
VITR 1.0 F 25V CER
CAP 0805 X7R 10%
56 nH
Coilcraft 0603 CS 10%
470 nH Coilcraft 0805 CS 10%
6.8 nH
Coilcraft 0603 CS 10%
R Bias = (Vs - Vd) / Id
75
1206 1/4W
DNP (Do Not Place)
Size
0805
0805
0603
0805
0603
1206 / 1210
1206
N/A
Note: Contact factory for matching recommendations if flat gain is
required from 2 to 6 GHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Physical Dimensions - SC Package (SOT-89)
4.50
[0.177]
1.55
[0.061]
0.71
[0.028]
1.73
[0.068]
0.38
[0.015]
1.70
[0.067]
4
0.41
[0.016]
1
0.46
[0.18]
3X
3.48
[0.137]
XXXXXXX
XXXXXX
ZYYWW
2
2.50
[0.096]
3
4.41
[0.163]
2.06
[0.081]
5.33
[0.210]
0.99
[0.039]
1.27
[0.050]
0.58
[0.023]
1.50
[0.059]
3.00
[0.118]
0.38
[0.015]
0.76
[0.030]
0.64
[0.025]
DIMENSIONS IN MILLIMETERS
[INCHES]
0.86
[0.034]
3.86
[0.152]
MARKINGS:
XXXXXXX = MIMIX MODEL NO.
XXXXXX = WAFER LOT NO.
ZYYWW = DATE CODE (YR/WEEK)
FIRST LETTER COUNTRY OF ORIGIN IF OTHER THAT USA
Physical Dimensions - BD (Bare Die)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 7 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
DC-8.0 GHz InGaP HBT, MMIC or Packaged
Matched Gain Block Amplifier
September 2006 - Rev 01-Sep-06
CGB7017-SC (-BD)
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
CGB7017-BD
CGB7017-SC-0G00
CGB7017-SC-0G0T
CGB7017-SP-0G00
CGB7017-SP-0G0T
PB-CGB7017-SC-0000
PB-CGB7017-SP-0000
Description
Bare die in GelPak
Matte Tin plated RoHS compliant SOT-89 surface mount package in bulk quantity
Matte Tin plated RoHS compliant SOT-89 surface mount package in tape and reel
Matte Tin plated RoHS compliant SOT-86 surface mount package in bulk quantity
Matte Tin plated RoHS compliant SOT-86 surface mount package in tape and reel
Evaluation Board for SOT-89 packaged device with SMA connectors
Evaluation Board for SOT-86 packaged device with SMA connectors
We also offer the plastic packages with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager
for more information regarding different plating types
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 8 of 8
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.