11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier March 2006 - Rev 08-Mar-06 CMM1118-QT Features 20 dB Gain 14 dBm P1dB 3x3 QFN Package Single Power Supply 5-7 V, 90 mA Self Bias On-Chip ESD Protection Circuit Description Mimix Broadband’s 3 stage 11.0 to 20.0 GHz driver amplifier is packaged in surface mount 3x3 QFN package. The device is a self-biased, single supply design with 20 dB gain and 14 dBm P1dB. This MMIC uses Mimix Broadband’s 0.25um optical pHEMT process. Absolute Maximum Ratings Supply Voltage RF Input Power Storage Temperature (Tstg) Junction Temperature Operating Temperature +8 V +10 dBm -55 ºC to +125 ºC 175 ºC -40 ºC to +85ºC Electrical Characteristics (T=25ºC) Parameter Units GHz dB Frequency Range Gain Input Return Loss Output P1dB Output IP3 Supply Voltage dBm dBm V Min. 11 - Typ. 20 -10.5 14 22 5 Max. 20 - 14 20.4 -11.2 -18.8 12.3 22.2 Typical 16 19.6 -10.6 -11 15.5 23 18 19.2 -17 -7.5 14.7 23 20 20 -5.5 -8 16 22.2 Typical Parameters Parameter Frequency Gain IP Return Loss Op Return Loss P1dB OIP3 12 21.5 -10.3 -8 12.3 23.3 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 6 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier March 2006 - Rev 08-Mar-06 CMM1118-QT Driver Amplifier Measurements Input Return Loss Gain 0 25 -5 -10 15 (dB) Gain (dB) 20 -15 10 -20 5 -25 -30 0 10 12 14 16 18 10 20 12 5volt 6volt 14 16 18 20 18 20 18 20 Frequency (GHz) Frequency (GHz) 5volt 7volt Output Return Loss 6volt 7volt P1dB 20 0 18 16 P1dB (dBm) -5 (dB) -10 -15 -20 14 12 10 8 6 4 2 -25 0 10 12 14 16 Frequency (GHz) -30 10 12 14 16 18 20 5volts 6volts 7volts Frequency (GHz) 5volt 6volt 7volt OIP3 Psat 20 30 18 25 OIP3 (dBm) Psat (dBm) 16 14 12 10 8 20 15 10 6 4 5 2 0 10 12 14 16 18 Frequency (GHz) 5volts 6volts 7volts 20 0 10 12 14 16 Frequency (GHz) 5volts Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 6volts 7volts Page 2 of 6 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier March 2006 - Rev 08-Mar-06 CMM1118-QT Driver Amplifier Measurements (cont.) Psat 20 16 18 14 16 Psat (dBm) P1dB (dBm) P1dB 18 12 10 8 6 4 14 12 10 8 6 4 2 2 0 0 10 12 14 16 18 25°C 10 12 14 16 18 20 Frequency (GHz) Frequency (GHz) -40°C 20 80°C -40°C Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 25°C 80°C Page 3 of 6 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier March 2006 - Rev 08-Mar-06 CMM1118-QT Evaluation Board Layout Package Pin-out Table Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14 Pin15 Pin16 GND or NC RF Input GND or NC GND or NC GND or NC GND or NC GND or NC GND or NC GND or NC GND or NC RF Output GND or NC Vdd GND or NC GND or NC GND C1 = 1000pF C2 = 1 F Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 6 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier CMM1118-QT March 2006 - Rev 08-Mar-06 Package Outline and Assembly PIN 1 INDICATOR A D VDD A2 13 14 15 16 1 12 RF OUT 1118G XXXX XXYY E CHAMFER 0.30 X 0.30 b K 11 2 10 3 e RF IN E2 9 4 8 7 6 5 L 0.00-0.05 D2 A3 RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS 1.00 ±.005 2.00 ±.05 1.40 ±.05 (4 SIDES) 4.00 ±.05 PACKAGE OUTLINE NOTE: 1. ALL DIMENSIONS ARE IN mm A A3 A2 b K D E e D2 E2 L MIN 0.80 0 0.20 0.20 1.50 1.50 0.16 NOM 0.90 0.20 REF 0.65 0.25 3.00 BSC 3.00 BSC 0.50 1.65 1.65 0.26 MAX 1.00 1.00 0.30 - 1.80 1.80 0.36 0.30 ±.005 0.50 BSC Ordering Information Part Number for Ordering CMM1118-QT-0G00 CMM1118-QT-0G0T PB-CMM1118-0000 Description Matte Tin finished RoHS compliant 3x3 QFN in bulk quantity Matte Tin finished RoHS compliant 3x3 QFN in tape and reel Evaluation Board Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 6 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 11.0-20.0 GHz GaAs MMIC Packaged Driver Amplifier March 2006 - Rev 08-Mar-06 CMM1118-QT Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Part Numbering Designator - For Mimix/Celeritek lead-free products, the letter “G” will be used in the part number for Matte Tin finished RoHSCompliant components and “L” will be used in the part number of NiPdAu finished RoHS Compliant components in the second position of the part number suffix, as shown below: Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin finished RoHScompliant parts Example B: CXX1234-XX-0L0T = component in tape and reel NiPdAu finished RoHS parts For those customers not making the change at this time, Mimix/Celeritek will maintain production of current configurations. For questions and comments e-mail: [email protected]. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 6 Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.