MITSUMI Detach Connectors CAM-D36, D37 Connectors FEATURES 1. Due to these connectors, the front panel can be CAM-D36(Plug) removed or mounted for preventing the car audio from being stolen. They are also suitable for connecting the circuit between various electronic units. 2. These connectors can absorb a fitting play by setting the fitting port size. 3. Since each socket connector can directly be mounted to the main PCB of the set, VA of the set is possible. A metallic cover is mounted for preventing static electricity. CAM-D37(Socket) HOW TO ORDER 1. CAM-D36 (Plug) 2. CAM-D37 (Socket) D36-015-02 0-A N G A A 1 2 3 4 5 6 7 8 9 D37-015-02 0-A N B M G 1 2 3 4 5 6 7 8 9 1 Series No. (D36) 1 Series No. (D37) 2 No. of contacts (015 : 15pins) 3 Housing Material (02 : PBT resin) 2 No. of contacts (015 : 15pins) 3 Housing Material (02 : PBT resin) 4 UL grade of housing (0 : UL94V-0) 5 Contact plating (A : Gold) 4 UL grade of housing (0 : UL94V-0) 5 Contact plating (A : Gold) 6 Contact pin plating thickness (N : 0.2µm) 6 Contact pin plating thickness (N : 0.2µm) 7 Contact pin lead profile (G : Angle SMT) 8 Attachment on connector fitting side (A : None) 7 Contact pin lead profile (B : Angle) 8 Attachment on connector fitting side (M : Shielded case) 9 Attachment on connector PCB side (A : None) 9 Attachment on connector PCB side (A : Guide pin) SPECIFICATIONS ELECTRICAL CHARACTERISTICS Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance 14V DC 1A 500V AC (rms) 1minute 100MΩ min. (at 500V DC) 70mΩ max. MITSUMI Detach Connectors MECHANICAL CHARACTERISTICS 10,000 times 14.7N (1.5kgf) max. 4.9N (0.5kgf) max. -30~+85˚C Life (Matching Cycle) Total Insertion Force Overall Rebound Force Using Temperature Range *Contact : 15 pins MATERIAL & FINISH Component Parts Housing CAM-D36 Contact Cap Housing Contact CAM-D37 Cover Guide Pin Material Glass filled PBT resin Copper Alloy PC/ASA resin Glass filled PBT resin Copper Alloy Copper Alloy Copper Alloy Finish —— Gold plating —— —— Gold plating Tin reflow plating Copper-tin plating DIMENSIONS CAM-D36 22.9 16.8 1.5 0.6 Y (4°) 3+0.1 0 0.25 6 Y-Y Y 2-ø1.2 +0.1 0 1.4 5 ±0.1 2.8 19.6 1.8 ±0.05 2.8 ±0.05 0 ±0.2 1 0 ±0.2 5.5 1.4 ±0.05 3 +0.1 0 2.2 ±0.1 (2.3) 1.3 ±0.05 1.5 21.7 ±0.05 16.8 ±0.05 19.6 ±0.05 1.1 2-C0.3 (All around) 2-ø2 Recommended PWB layout (reference) 1.3 ±0.15 ±0.1 21.7 ±0.15 (Boss Pitch size) 5.2 5.8 26.1 Packing form CAM-D37 2-ø1.4 0.08 3.3 ±0.05 1.7 ±0.05 15-ø0.9 0.08 1.4 ±0.03 2.8 ±0.03 +0.1 0 +0.1 0 0.9 +0.1 0 Recommended PWB layout (reference) 2.4 +0.1 0 14.8 0.8 ±0.05 25.9 ±0.05 24.2 ±0.05 19.6 ±0.05 16.8 ±0.05 26.2 24.4 19.6 16.8 2.8 16 5.3 Y 5.5 3.5 3 (2) 6 Y 0.3 0.6 Y-Y 0.25 2-C0.5 (0.7) 24.2 ±0.2 25.9 29.5 4.5 8.8 8.3 (0.6) 1.4 (0.8) 2 10.5 13.8 ø1.2 12.1 14.6 Unit : mm