MITSUMI Ultrasonic Sensor SUD-40165CB00•SUD-40150CB00 OUTLINE The piezoelectrical effect of piezoelectric ceramic is used in this ultrasonic sensor for detecting the 40kHz- wavelength of acoustic energy. FEATURES 1. Small size, light weight. 2. Size can be between ø15 ~ 20mm in diameter. 3. Optimum structure and decay time. 4. Maximum input voltage is large, and sensitivity setting is easy. 5. Wide usage temperature range: -30 ~ +80°C 6. Sensor is sealed and suitable for in-vehicle or outdoor use. USES 1. Car rear sensors (sonar) 2. Unattended parking systems 3. Unattended open/close systems 4. Intruder warning devices SPECIFICATIONS Item Nominal frequency Sound pressure Sensitivity Reverbatory sensitivity Decay time Insulating resistance Maximum input voltage Operating temperature range Specification 40kHz 100dB typ. -84dB typ. 1.5mVp-p min. 1.5ms max. 100MΩ (when DC 100V is impressed) DC 100V max. AC 150Vp-p max. -30~+80°C *Specifications may be changed for the purpose of improvement and upgrading. MITSUMI Ultrasonic Sensor DIMENSIONS SUD-40165CB00 4±1.5 4 2.5±1.5 2 ø5.5 9 ø16.5±0.1 Vertical XXXXXXX XXXX 7.2 R0.3 6 Horiaontal LEAD WIRE AREA 2.8±0.3 7.3 7 2.6 2.3 4.4±0.3 ø15.5±0.1 6 1.6 1.6 2±0.05 PWB LAYOUT 1.6±0.3 2-ø0.8±0.05 (HOLE) 1 1 11.5 1 40±5 1 : CAP 2 : LEAD WIRE (AWG30) SIGNAL-WIRE (COLOR: RED) GND-WIRE (COLOR: BLACK) 2 3 : CONNECTOR (JAPAN AUTOMATIC MACHINE CO.,LTD.) HOUSING (MODEL No.: JB20-02HC) TERMINAL (MODEL No.: 508310-2MA) 4 : Serial No. LABEL 2.9±0.3 Unit: mm SUD-40150CB00 4 0.5±1.5 ø5.5 4 8 ø15 3.5±1.5 4.9±0.3 3 Vertical XXXXXXX XXXX 6.75 LEAD WIRE AREA Horiaontal 2.8±0.3 4.4±0.3 5.5 2-ø0.8±0.05 (HOLE) 2±0.05 1.6±0.3 10 1 50±5 1 : CAP 2 : LEAD WIRE (AWG30) SIGNAL-WIRE (COLOR: RED) GND-WIRE (COLOR: BLACK) 2 2.9±0.3 4.9±0.3 3 3 : CONNECTOR (JAPAN AUTOMATIC MACHINE CO.,LTD.) HOUSING (MODEL No.: JB20-02HC) TERMINAL (MODEL No.: 508310-2MA) 4 : Serial No. LABEL Unit: mm