Global Part Numbering Information Vishay BCcomponents NTC Leaded GENERAL ORDER INFORMATION PART NUMBER: NTC L E100 E3 103 J B0 N PRODUCT FAMILY NTC T EXECUTION L = leaded C L E TYPE E100 = epoxy Cu 0.6 mm color coding 1 0 0 E RoHS COMPLIANCE TERMINATION TYPE E3 = Sn E4 = silver E101 = epoxy Cu 0.6 mm no color coding 3 1 0 3 R25 VALUE 103 = 10 x 103 Ω 102 = 10 x 102 Ω 101 = 10 x 101 Ω 109 = 10 x 100 Ω 108 = 10 x 10-1 Ω see spec. for values J B TOLERANCE ON R25 F=1% G=2% H=3% J=5% K = 10 % 0 PACKAGING B or B0 = bulk T1 = on TDK tape pitch 1e T2 = on TDK tape pitch 2e E203 = epoxy Ni 0.4 mm E300 = epoxy ETFE AWG30 wires E201 = epoxy Ni 0.3 mm E301 = epoxy PEEK AWG30 PRODUCT DESCRIPTION: 2381 640 6 3 103 2381 640 6 3 103 RoHS COMPLIANCE 2381 = YES 2322 = NO EXECUTION 640 = sawn chip (R25 in E-series) 645 = sawn chip (R25 not in E-series) TYPE leaded epoxy 6 = Cu 0.6 mm color coding 5 = Ni 0.4 mm 4 = Cu 0.6 mm on tape 1e 3 = Cu 0.6 mm on tape 2e 10 = Ni 0.3 mm with special R25 tolerances 20 = insulated Ni 0.25 mm with special tolerances 0 = Cu 0.6 mm without coding (R25 not in E-series) TOLERANCE ON R25 5=1% 4=2% 6=3% 3=5% 2 = 10 % R25 VALUE 103 = 10 x 103 Ω 102 = 10 x 102 Ω 101 = 10 x 101 Ω 109 = 10 x 100 Ω 108 = 10 x 10-1 Ω see spec. for values www.vishay.com 68 For technical questions, contact: [email protected] Document Number: 33032 Revision: 13-Apr-07