MITSUMI RF Module for Cordless Telephone in Japan Use TRM5P/F-J Series Telecommunication component OUTLINE The MITSUMI TRM5P/F-J series have been developed by modifying the transmitting/receiving circuit, audio modulator and demodulator circuit, and PLL circuit of the Japanese market-oriented small power cordless telephones into compact and light weight modules. TRM5P-J Series TRM5F-J Series FEATURES 1. Low power consumption cordless telephone for domestic use. (Frequency bands used 250MHz and 380MHz.) 2. Achieves 13cc capacity. 3. Ultra-small, Ultra-thin (53 28 9). 4. Light weight, at 18g 5. Two types of mounting configurations are available : the board mounting type (TRM5P) and FPC connector type (TRM5F). 6. Low current consumption and low voltage operation. (Built-in 2V regulator) Also, the design supports uniaxial and bi-axial antennas. TRM5P/F-J BLOCK DIAGRAM MITSUMI RF Module for Cordless Telephone in Japan Use SPECIFICATIONS Item Standard Voltage Current Consumption Weight RECEIVER Reference Sensitivity Signal to Noise Ratio Total Harmonic Distortion Spurious Response Spurious Emissions Adjacent Channel Selectivity Audio Output Level TRANSMITTER Carrier Power Frequency Error Spurious Emissions Total Harmonic Distortion Signal to Noise Ratio *Audio FM Deviation Specifications BASE HAND 3.5 2.4 Communication 64/ Communication 52/ Stand-by 24 Stand-by 21 18 -4 -2 Unit V mA g 140 dBµV dB % dB dBm dB mVrms 10 ±3.8 (max.) -50 0.4 45 1.5 mW ppm dBm % dB kHz 50 1 60 -65 63 60 *Audio Input Level : 100mVrms. DIMENSIONS Unit : mm *For the technical details of the products in this page, please refer to Marketing & Engineering Div., AVC Business Div., Network Devices Business HQ. Phone: 046 (230) 3480.