M-Pulse Microwave Silicon Bipolar MMIC Cascadable Amplifier MP4TD4135, MP4TD4136 Ceramic Microstrip Case Style Outlines1,2,3 Features • Cascadable 50Ω Gain Block • 3dB Bandwidth: DC to 1.0 GHz • 15.0 dB Typical Gain @ 0.5 GHz • Unconditionally Stable (k>1) • 3.3 Volt Operation • Cost Effective Ceramic Microstrip Package • Tape and Reel Packaging Available Available in short lead version as MP4TD4136. 4 GND .085 2,16 RF OUT AND BIAS RF INPUT 1 .020 0,508 3 Description M-Pulse's MP4TD4135 and MP4TD4136 are high performance silicon bipolar MMICs housed in a cost effective ceramic microstrip packages. The MP4TD4135 and MP4TD4136 are designed for use where a general purpose 50Ω gain block is required. Typical applications include narrow and wide band IF and RF amplifiers in industrial and military applications. The MP4TD4135 and MP4TD4136 are fabricated using a 10 GHz fT silicon bipolar technology that features gold metalization and IC passivation for increased performance and reliability. TYPICAL POWER GAIN vs FREQUENCY 16 Id=35mA GAIN (dB) 12 10 8 6 GAIN FLAT to DC 4 0.1 1 FREQUENCY (GHz) GND .100 2,54 ø .083 2,11 .022 0,56 .057 1,45 .455 ±.030 11,54 ±0,76 .006 ±.002 0,15 ±0,05 MA4TD4135 0.180 ±0.010 4,57 ±0,25 MA4TD4136 Notes: (unless otherwise specified) 1. Dimensions are in / mm 2. Tolerance: in .xxx = ±.005; mm .xx = ±.13 3. See last page of data sheet for short lead Micro-X 18 14 2 10 Pin Configuration Pin Number 1 2&4 3 Electrical Specifications @ TA = +25°C, Id = 35 mA, Z0 = 50Ω Symbol Parameters Test Conditions Units 2 Gp f = 0.1 GHz dB Power Gain (⏐S21⏐ ) Gain Flatness f = 0.1 to 0.9 GHz dB ΔGp f3 dB 3 dB Bandwidth GHz SWRin Input SWR f = 0.1 to 1.5 GHz SWRout Output SWR f = 0.1 to 1.5 GHz P1dB Output Power @ 1dB Gain Compression f = 1.0 GHz dBm NF f = 1.0 GHz dB 50 Ω Noise Figure IP3 Third Order Intercept Point f = 1.0 GHz dBm tD Group Delay f = 1.0 GHz ps Vd Device Voltage V dV/dT Device Voltage Temperature Coefficient mV/°C Parameter Absolute Maximum Ratings1 Pin Description RF Input AC/DC Ground RF Output and DC Bias Min. Typ. Max. 15.5 16.0 17.0 + 1.0 1.2 1.5 1.5 8.5 4.2 19.0 200 2.8 3.3 3.7 -5.0 Absolute Maximum Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ FX (408) 432-3440 1 Silicon Bipolar MMIC Cascadable Amplifier MP4TD4135, MP4TD4136 Typical Bias Configuration Device Current 75 mA Power Dissipation2,3 200 mW RF Input Power +13 dBm Junction Temperature 200°C Storage Temperature -65°C to +200°C Thermal Resistance: θjc = 150 °C/W Rbias Id = 1. Exceeding these limits may cause permanent damage. 2. Case Temperature (Tc) = 25 °C. 3. Derate at 6.7 mW/°C for Tc > 170°C. Vcc > 5.5 V Vcc - Vd Rbias RFC (Optional) 4 C (DC Block) C (DC Block) 3 MP4TD4135 MP4TD4136 IN 1 OUT Vd = 3.3 V 2 Typical Performance Curves @ Id = 35 mA, TA = +25°C (unless otherwise noted) RETURN LOSS vs FREQUENCY 0 -5 RETURN LOSS (dB) Id, DEVICE CURRENT (mA) DEVICE CURRENT vs DEVICE VOLTAGE 50 45 40 35 30 25 20 15 10 5 0 INPUT -10 -15 -20 OUTPUT -25 -30 -35 0.0 0.5 1.0 1.5 2.0 2.5 Vd, DEVICE VOLTAGE (V) 3.0 3.5 0.1 4.0 10 POUT @ 1dB GAIN COMPRESSION vs FREQUENCY POWER GAIN vs CURRENT 18 f= 0.1 GHz 16 POUT - 1dB (dBm) f= 0.5 GHz 14 GAIN (dB) 1 FREQUENCY (GHz) f= 1.0 GHz 12 10 f= 2.0 GHz 8 6 4 14 13 12 11 10 9 8 7 6 5 4 10 15 20 25 30 35 Id, DEVICE CURRENT (mA) 40 45 50 0.1 1 FREQUENCY (GHz) 10 Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ FX (408) 432-3440 2 Silicon Bipolar MMIC Cascadable Amplifier MP4TD4135, MP4TD4136 REVERSE ISOLATION vs FREQUENCY NOISE FIGURE FREQUENCY -12 REVERSE ISOLATION (dB) NOISE FIGURE (dB) 6.0 5.5 Id=35mA 5.0 4.5 4.0 3.5 3.0 -13 -14 -15 -16 -17 -18 -19 -20 -21 0.1 1 FREQUENCY (GHz) 10 0.1 1 FREQUENCY (GHz) 10 Typical Scattering Parameters Z0 = 50Ω, TA = +25°C, Id = 35 mA Frequency S11 (GHz) Mag. Angle 0.1 0.023 -59.7 0.2 0.042 -80.2 0.3 0.061 -90.0 0.4 0.080 -98.0 0.5 0.101 -102.5 0.6 0.120 -107.1 0.7 0.141 -111.9 0.8 0.159 -115.8 0.9 0.177 -120.8 1.0 0.196 -124.6 1.5 0.278 -144.6 2.0 0.338 -161.6 2.5 0.394 -175.3 3.0 0.424 172.6 Ordering Information Long Lead Model No. MP4TD4135 MP4TD4135T S21 Mag. 6.58 6.49 6.38 6.24 6.08 5.89 5.68 5.49 5.25 4.99 3.97 3.15 2.60 2.16 S12 Angle 172.2 164.7 157.4 150.2 143.4 136.6 129.8 123.5 117.6 111.6 86.7 66.8 51.1 38.3 Mag. 0.100 0.101 0.104 0.107 0.110 0.113 0.117 0.122 0.127 0.133 0.153 0.169 0.178 0.188 Short Lead Model No. MP4TD4136 MP4TD4136T S22 Angle 3.3 6.1 9.0 11.3 13.2 15.3 17.2 18.2 19.2 19.8 19.9 18.0 16.3 14.3 Mag 0.122 0.123 0.127 0.130 0.134 0.138 0.141 0.141 0.142 0.142 0.123 0.086 0.069 0.105 Angle -15.0 -30.9 -43.7 -59.2 -72.1 -85.3 -96.9 -107.6 -114.8 -124.8 -152.7 -165.2 -146.3 -133.6 Package Ceramic Tape and Reel Mico-X Case Styles (Long Lead) (Short Lead) Specification Subject to Change Without Notice M-Pulse Microwave PH (408) 432-1480 __________________________________________________________________________________ FX (408) 432-3440 3