M-Pulse Microwave Silicon Bipolar MMIC Cascadable Amplifier MP4TD0400 Chip Outline Drawing1,2,3,4 RF Input Features • Cascadable 50Ω Gain Block • 3dB Bandwidth: DC to 3.2 GHz • 9.0 dB Typical Gain @ 1.0 GHz • Unconditionally Stable (k>1) 375 µ (14.8 mil) Description M-Pulse's MP4TD0400 is a high performance silicon bipolar MMIC chip. The MP4TD0400 is designed for use where a general purpose 50Ω gain block is required. Typical applications include narrow and wide band IF and RF amplifiers in industrial and military applications. The MP4TD0400 is fabricated using a 10 GHz f T silicon bipolar technology that features gold metalization and IC passivation for increased performance and reliability. TYPICAL POWER GAIN vs FREQUENCY 10 Ground Optional RF Output & +5.25 Volts 375 µ (14.8 mil) Notes: (unless otherwise specified) 1. Chip Thickness is 120 µm; 4.8 mils 2. Bond Pads are 40 µm; 1.6 mils typical in diameter 3. RF Output Contact & +DC Voltage Is Normally Made On Backside Of Chip At Die Attach 4. Tolerance:µm .xx = ±.13; mil .x = ±.5 9 8 Id = 5 0 mA 7 Ordering Information Gain (dB) 6 Model No. MP4TD0400 GEL MP4TD0400 WAF MP4TD0400 TF 5 4 3 2 1 Type of Carrier GEL PACK Waffle Pack Tape Frame Ga in Fla t t o DC 0 0.1 1 10 Fre que nc y (GH z) Electrical Specifications @ T A = +25°C, Id = 50 mA; Zo = 50Ω Symbol Parameters Test Conditions Gp Power Gain (S212) f = 0.1 GHz Gain Flatness f = 0.1 to 2.0 GHz ∆Gp f 3 dB 3 dB Bandwidth SWRin Input SWR f = 0.1 to 2.0 GHz SWRout Output SWR f = 0.1 to 2.0 GHz P1 dB Output Power @ 1 dB Gain Compression f = 1.0 GHz NF f = 1.0 GHz 50 Ω Noise Figure IP3 Third Order Intercept Point f = 1.0 GHz tD Group Delay f = 1.0 GHz Vd Device Voltage dV/dT Device Voltage Temperature Coefficient - Units dB dB GHz dBm dB dBm ps V mV/°C Min. 4.75 - Typ. 9.0 ±0.6 3.2 1.4 1.7 12.5 6.2 25.5 125 5.25 -8.0 Max. 5.75 - Specification Subject to Change Without Notice M-Pulse Microwave 1 PH (408) 432-1480 __________________________________________________________________________________ FX (408) 432-3440 Silicon Bipolar MMIC Cascadable Amplifier MP4TD0400 Absolute Maximum Ratings1 Typical Bias Configuration Parameter Absolute Maximum Device Current 100 mA Power Dissipation2,3 650 mW RF Input Power +13 dBm Junction Temperature 200°C Storage Temperature -65°C to +200°C Thermal Resistance: θjms = 35 °C/W Rbias Vcc > 7 V Id = Vcc - Vd Rbias RFC (Optional) 1. Exceeding these limits may cause permanent damage. 2. Mounting Surface Temperature (TMS)= 25 °C. 3. Derate at 28.6 mW/°C for TMS > 177°C 4 C (DC Block) C (DC Block) 3 MP4TD0400 IN OUT 1 Vd = 5.25 V 2 Typical Performance Curves @ Id = 50 mA, TA = +25°C (unless otherwise noted) DEVICE CURRENT vs DEVICE VOLTAGE RETURN LOSS vs FREQUENCY 80 0 70 -5 50 Return Loss (dB) Id, Device Current (mA) 60 40 30 -1 0 I nput -1 5 20 Out put -2 0 10 0 -2 5 0 1 2 3 4 5 6 0 .1 1 V d, De vice V olta ge (V) POUT @ -1DB GAIN COMPRESSION vs FREQUENCY POWER GAIN vs CURRENT 10 18 f=.1 GH z f=1 .0 GH z 9 16 14 8 I d= 7 0mA f= 2.0 GHz 12 Pout -1dB (dBm) 7 Gain (dB) 10 Freque ncy (GH z) 6 5 Id= 50 mA 10 8 6 4 4 3 I d=3 0mA 2 2 0 20 30 40 50 60 70 Id, De vice Current (mA) 80 0.1 1 Freque ncy, GH z Specification Subject to Change Without Notice M-Pulse Microwave 2 PH (408) 432-1480 __________________________________________________________________________________ FX (408) 432-3440 10 Silicon Bipolar MMIC Cascadable Amplifier MP4TD0400 NOISE FIGURE vs FREQUENCY REVERSE ISOLATION vs FREQUENCY 7.5 -1 0 7.3 -1 1 7.1 -1 2 6.9 -1 3 Reverse Isolation (dB) Noise Figure (dB) Id=5 0 mA 6.7 Id=3 0mA 6.5 6.3 6.1 5.9 -1 4 -1 5 -1 6 -1 7 -1 8 I d= 7 0mA 5.7 -1 9 5.5 -2 0 0 .1 1 10 0 .1 1 Freque ncy (GH z) 10 Freque ncy (GH z) Typical Scattering Parameters Z0 = 50Ω, T A = +25°C, Id = 50 mA Frequency S11 S22 S12 S22 (GHz) Mag. Angle Mag. Angle Mag. Angle Mag Angle 0.1 0.192 169.4 2.86 174.6 0.148 4.9 0.070 3.8 0.2 0.191 170.2 2.86 171.9 0.147 5.4 0.079 -12.4 0.4 0.188 171.7 2.86 164.9 0.147 7.3 0.102 -47.9 0.6 0.180 170.6 2.85 157.3 0.150 10.4 0.128 -73.9 0.8 0.171 169.6 2.83 149.8 01.54 13.8 0.153 -90.2 1.0 0.165 170.1 2.80 142.4 0.158 17.0 0.177 -102.2 1.5 0.163 176.1 2.71 124.2 0.172 24.0 0.228 -126.3 2.0 0.199 -178.6 2.57 106.6 0.188 28.6 0.258 -146.0 2.5 0.245 179.8 2.37 88.7 0.204 31.4 0.266 -161.5 3.0 0.300 173.3 2.14 75.6 0.216 33.8 0.258 -171.2 3.5 0.355 163.9 1.91 64.4 0.228 35.5 0.253 -177.6 4.0 0.407 153.3 1.73 55.0 0.234 37.2 0.251 178.5 4.5 0.456 142.3 1.58 46.2 0.241 40.3 0.262 176.4 5.0 0.508 131.2 1.44 39.1 0.252 42.8 0.279 173.8 Specification Subject to Change Without Notice M-Pulse Microwave 3 PH (408) 432-1480 __________________________________________________________________________________ FX (408) 432-3440