7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays 5082-761x Series 5082-762x Series 5082-765x Series 5082-766x Series HDSP-360x Series HDSP-460x Series HDSP-E15x Series Technical Data Features • Industry Standard Size • Industry Standard Pinout 7.62 mm (0.300 inch) DIP Leads on 2.54 mm (0.100 inch) Centers • Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green • Excellent Appearance Evenly Lighted Segments ± 50° Viewing Angle Optimum Contrast Given by Gray Top Surface for AlGaAs Red and Green Devices Red Top Surface for HER Devices Yellow Top Surface for Yellow Devices • Design Flexibility Common Anode or Common Cathode Single Digits Left or Right Hand Decimal Point ± 1. Overflow Character • Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display • High Light Output • High Peak Current • Excellent for Long Digit String Multiplexing • Intensity and Color Selection Available See Intensity and Color Selected Displays Data Sheet • Sunlight Viewable AlGaAs Description The 7.6 mm (0.3 inch) and 10.9 mm (0.43 inch) LED seven segment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet). These devices use an industry standard size package and pinouts. All devices are available as either common anode or common cathode. Devices AlGaAs[1] Red HDSP- HER[1] 5082- Yellow 5082- Green HDSP- 7610 7620 3600 7.6 mm Common Anode Left Hand Decimal 7611 7621 3601 7.6 mm Common Anode Right Hand Decimal B 7613 7623 3603 7.6 mm Common Cathode Right Hand Decimal C 7616 7626 3606 7.6 mm Universal ± 1. Overflow Right Hand Decimal[2] D E150 7650 7660 4600 10.9 mm Common Anode Left Hand Decimal E E151 7651 7661 4601 10.9 mm Common Anode Right Hand Decimal F E153 7653 7663 4603 10.9 mm Common Cathode Right Hand Decimal G E156 7656 7666 4606 10.9 mm Universal ± 1. Overflow Right Hand Decimal[2] H Description Package Drawing A Notes: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low current operation. 2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D. 3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H. 2 Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation 4: Color Bin 4 Only (applicable for Green devices only) B: Color Bins 2 and 3 (applicable for Yellow devices only) Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] 0: Common Anode 1: Common Anode 3: Common Cathode Device Specific Configuration[1] Refer to Respective Datasheet Package[1] E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 3 These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current or high light ambient design. The low current displays are ideal for portable applications. The high light ambient displays are ideal for high light ambients or long string lengths. For additional informa- tion see the Low Current Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets. Package Dimensions NOTES; 1. DIMENSIONS IN MILLIMETRES AND (INCHES). 2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. 3. REDUNDANT ANODES. 4. UNUSED DP POSITION. 5. SEE INTERNAL CIRCUIT DIAGRAM. 6. REDUNDANT CATHODE. 7. SEE PART NUMBER TABLE FOR L.H.D.P. AND R.H.D.P. DESIGNATION. 8. FOR YELLOW AND GREEN DEVICES ONLY. 4 Internal Circuit Diagram Absolute Maximum Ratings Description Average Power per Segment or DP AlGaAs Red HDSP-E150 Series HER 5082-7610/ 7650 Series Yellow 5082-7620/ 7660 Series Green HDSP-3600/ 4600 Series Units 96 105 80 105 mW [7] mA 30[8] mA [1] Peak Forward Current per Segment or DP 160 DC Forward Current per Segment or DP 40[2] Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 Seconds (1.59 mm [0.063 in.] below Body) 90 [3] 60 30[4] [5] 20[6] -20 to +100[9] -40 to +100 90 °C -55 to +100 °C 3.0 V 250 °C Notes: 1. See Figure 1 to establish pulsed conditions. 2. Derate above 46°C at 0.54 mA/°C. 3. See Figure 6 to establish pulsed conditions. 4. Derate above 53°C at 0.45 mA/°C. 5. See Figure 7 to establish pulsed conditions. 6. Derate above 81°C at 0.52 mA/°C. 7. See Figure 8 to establish pulsed conditions. 8. Derate above 39°C at 0.37 mA/°C. 9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor. 5 Electrical/Optical Characteristics at TA = 25°C AlGaAs Red Device Series Parameter Symbol Min. Typ. Luminous (Digit Average) IV 8.5 15.0 mcd IF = 20 mA 1.8 V IF = 20 mA Forward Voltage/Segment or DP VF V IF = 100 mA Intensity/Segment[1, 2, 5] HDSPE15x 2.0 Max. 3.0 Units λPEAK 645 nm Wavelength[3] λd 637 nm Reverse Voltage/Segment or DP[4] VR 15 V Peak Wavelength Dominant 3.0 Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junctionto-Pin RθJ-PIN 340 °C/W/Seg Test Conditions IR = 100 µA High Efficiency Red Device Series 5082-761x Parameter Symbol Intensity/Segment[1,2,6] Luminous (Digit Average) Max. 340 800 µcd IF = 5 mA 340 1115 µcd IF = 5 mA V IF = 20 mA VF 2.1 2.5 Units λPEAK 635 nm Wavelength[3] λd 626 nm Reverse Voltage/Segment or DP[4] VR 30 V Peak Wavelength All Typ. IV 5082-765x Forward Voltage/Segment or DP Min. Dominant 3.0 Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RθJ-PIN 280 °C/W Test Conditions IR = 100 µA 6 Yellow Device Series 5082-762x Parameter Luminous Intensity/Segment[1,2] (Digit Average) Symbol Peak Wavelength All Typ. Max. 205 620 µcd IF = 5 mA 290 835 µcd IF = 5 mA V IF = 20 mA IV 5082-766x Forward Voltage/Segment or DP Min. VF 2.2 λPEAK 583 2.5 Units Test Conditions nm Dominant Wavelength[3,7] λd 581.5 586 Reverse Voltage/Segment or DP[4] VR 3.0 40 V 592.5 nm IR = 100 µA Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RθJ-PIN 280 °C/W/Seg High Performance Green Device Series HDSP-360x Parameter Luminous Intensity/Segment[1,2] (Digit Average) Symbol 860 2700 µcd IF = 10 mA 1030 4000 µcd IF = 10 mA V IF = 10 mA VF 2.1 λPEAK 566 Dominant Wavelength[3,7] λd 571 Reverse Voltage/Segment or DP[4] VR Peak Wavelength All Typ. IV HDSP-460x Forward Voltage/Segment or DP Max. 3.0 2.5 Units Test Conditions Min. nm 577 nm 50 V Temperature Coefficient of VF /Segment or DP ∆VF /°C -2 mV/°C Thermal Resistance LED Junction-to-Pin RθJ-PIN 280 °C/W/Seg IR = 100 µA Notes: 1. Device case temperature is 25°C prior to the intensity measurement. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-E15X series. 6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the 5082-7650 series. 7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 7 IDC MAX. – MAXIMUM DC CURRENT PER SEGMENT – mA AlGaAs Red 40 35 30 25 20 15 10 5 0 20 30 1.75 AlGaAs RED 100 80 60 40 20 0 60 70 80 90 100 110 120 Figure 2. Maximum Allowable DC Current vs. Ambient Temperature. 140 120 40 50 TA – AMBIENT TEMPERATURE – °C 2.00 1.50 1.25 1.00 AlGaAs RED 0.75 0.50 0.25 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Figure 3. Forward Current vs. Forward Voltage. PEAK – NORMALIZED RELATIVE EFFICIENCY AlGaAs RED 160 VF – FORWARD VOLTAGE – V η RθJ-A = 770°C/W 45 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) IF – FORWARD CURRENT PER SEGMENT – mA Figure 1. Maximum Allowed Peak Current vs. Pulse Duration – AlGaAs Red. 50 1.4 1.2 1.0 AlGaAs RED 0.8 0.6 0.5 5.0 50.0 150.0 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 0 5 10 15 20 25 30 35 40 IF – FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative Luminous Intensity vs. DC Forward Current. 8 HER, Yellow, Green Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration – HER Series. Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow Series. Figure 8. Allowable Peak Current vs. Pulse Duration – Green Series. Figure 9. Maximum Allowable DC Current vs. Ambient Temperature. Figure 10. Forward Current vs. Forward Voltage. Figure 11. Relative Luminous Intensity vs. DC Forward Current. Figure 12. Relative Luminous Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 9 Intensity Bin Limits (mcd) AlGaAs Red Yellow HDSP-E15x Min. 8.67 13.00 19.50 29.30 43.90 Max. 15.90 23.80 35.80 53.60 80.50 IV Bin Category B C D E F G H 5082-761x Min. 0.369 0.516 0.774 1.160 1.740 2.610 3.915 Max. 0.630 0.946 1.418 2.127 3.190 4.785 7.177 IV Bin Category B C D E F G H 5082-765x Min. 0.347 0.485 0.728 1.091 1.636 2.454 3.682 IV Bin Category L M N O P HER IV Bin Category B C D E F G H 5082-762x Min. 0.229 0.317 0.476 0.714 1.073 1.609 2.413 Max. 0.387 0.582 0.872 1.311 1.967 2.950 4.425 IV Bin Category C D E F G H 5082-766x Min. 0.297 0.445 0.669 1.003 1.504 2.256 Max. 0.543 0.817 1.225 1.838 2.758 4.137 IV Bin Category H I J K L HDSP-360x Min. 0.86 1.29 1.94 2.90 4.37 Max. 1.58 2.37 3.55 5.33 8.01 IV Bin Category G H I J K L HDSP-460x Min. 1.03 1.54 2.31 3.46 5.18 7.78 Max. 1.88 2.82 4.23 6.34 9.50 14.26 Green Max. 0.593 0.890 1.333 2.000 3.000 4.500 6.751 10 Color Categories Color Yellow Green Bin 1 3 2 4 2 3 4 5 Dominant Wavelength (nm) Min. Max. 581.50 585.00 584.00 587.50 586.50 590.00 589.00 592.50 573.00 577.00 570.00 574.00 567.00 571.00 564.00 568.00 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning For information on soldering LEDs, please refer to Application Note 1027. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5963-7394E July 17, 2004 5988-3325EN WWW.ALLDATASHEET.COM Copyright © Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www.AllDataSheet.com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www.AllDataSheet.com