AGILENT HDSP-521E

14.2 mm (0.56 inch) General Purpose
Two Digit Seven Segment Displays
Technical Data
HDSP-52xE Series
HDSP-52xG Series
HDSP-52xY Series
Features
Applications
• Industry Standard Size
• Industry Standard Pin-Out
15.24 mm (0.6 in.) DIP Leads
on 2.54 mm (0.1 in.) Centers
• Choice of Colors
Red, Green, Yellow
• Mitered Font
Mitered Corners on Segments
• Gray Face Paint
Gray Package Gives Optimum
Contrast
• ± 50° Viewing Angle
• Design Flexibility
Common Anode or Common
Cathode
• Categorized for Luminous
Intensity
• Green and Yellow
Categorized for Color
• Suitable for Indoor Use
• Not Recommended for
Industrial Applications, i.e.
Operating Temperatures
Requirements Exceeding
85°C or Below -35°C[1]
• Extreme Temperature
Cycling Not
Recommended[2]
Description
These 14.2 mm (0.56 inch) two
digit displays use industry
standard size and pin-out. The
devices are available as either
common anode or common
cathode. These gray-faced
displays are available in a choice
of high efficiency red (HER),
green, or yellow colors. The
HDSP-521x and HDSP-523x
series are suitable for indoor use.
These parts are subjected to
Outgoing Quality Assurance
(OQA) inspection with AQL of
0.065% for functional and visual/
cosmetic rejects.
Devices
HER HDSP521E
523E
Green HDSP521G
523G
Yellow HDSP521Y
523Y
Description
Common Anode Right Hand Decimal
Common Cathode Right Hand Decimal
Notes:
1. For industrial applications, it is recommended to use HDSP-5521/5523/5621/5623/5721/5723.
2. For details, please contact your local Agilent sales office or an authorized distributor.
2
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
E: High Efficiency Red
G: Green
Y: Yellow
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest
Agilent representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1
bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
3
Package Dimensions
TOP END VIEW
2.54
(0.100)
HDSP-XXXX
YWW XZ COO
COUNTRY OF ORIGIN
COLOR BINNING
(NOTE 3)
2.34
(0.092)
DATE CODE
4.27 ± 0.50
(0.168 ± 0.020)
7.80
(0.307)
8.00
(0.315)
10°
18 17 16 15 14 13 12 11 10
14.22
(0.560)
18.60
(0.732)
1
DIGIT NO. 1
2
3
4
5
6
7
8
15.24
(0.600)
9
12.70
(0.500)
6.86
(0.270)
4.81
(0.191)
SIDE VIEW
6.150
(0.242)
25.00
(0.984)
FRONT VIEW
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. TOLERANCE IS 0.25 mm (0.01 INCH) UNLESS OTHERWISE STATED.
3. FOR GREEN AND YELLOW ONLY.
0.50
DIA.
(0.020)
LUMINOUS
INTENSITY
CATEGORY
4
Internal Circuit Diagram
18 17
16
15
14
13
12
11
10
COMMON ANODE
a
a
f
b
b
f
g
g
c
e
c
d
e
d
DP
1
2
3
4
DP
5
6
7
8
9
11
10
COMMON ANODE
18 17
16
15
14
13
12
a
a
f
b
b
f
g
g
c
e
c
d
e
d
DP
1
2
3
4
DP
5
6
7
COMMON CATHODE
8
9
COMMON CATHODE
PIN
FUNCTION
PIN
1
2
3
4
5
6
7
E CATHODE NO. 1
D CATHODE NO. 1
C CATHODE NO. 1
DP CATHODE NO. 1
E CATHODE NO. 2
D CATHODE NO. 2
G CATHODE NO. 2
1
2
3
4
5
6
7
E ANODE NO. 1
D ANODE NO. 1
C ANODE NO. 1
DP ANODE NO. 1
E ANODE NO. 2
D ANODE NO. 2
G ANODE NO. 2
8
9
10
11
C CATHODE NO. 2
DP CATHODE NO. 2
B CATHODE NO. 2
A CATHODE NO. 2
8
9
10
11
C ANODE NO. 2
DP ANODE NO. 2
B ANODE NO. 2
A ANODE NO. 2
FUNCTION
12
F CATHODE NO. 2
12
F ANODE NO. 2
13
DIGIT NO. 2 ANODE
13
DIGIT NO. 2 CATHODE
14
15
16
17
18
DIGIT NO. 1 ANODE
B CATHODE NO. 1
A CATHODE NO. 1
G CATHODE NO. 1
F CATHODE NO. 1
14
15
16
17
18
DIGIT NO. 1 CATHODE
B ANODE NO. 1
A ANODE NO. 1
G ANODE NO. 1
F ANODE NO. 1
5
Absolute Maximum Ratings at TA=25°C
Parameter
Average Power per Segment or DP
Peak Forward Current per Segment or DP
(1/10 Duty Cycle, 0.1 ms Pulse Width)
DC Forward Current per Segment or DP[1]
Reverse Voltage per Segment or DP
Operating Temperature
Storage Temperature
Wave Soldering Temperature for 3 seconds[4]
(2 mm [0.063 in.] below Body)
HER
HDSP-521E
HDSP-523E
62.5
90
25[1]
5
-35 to +85
-35 to +85
250
Green
Yellow
HDSP-521G HDSP-521Y
HDSP-523G HDSP-523Y Units
105
45
mW
90
60
mA
30[3]
5
-35 to +85
-35 to +85
250
20[2]
5
-35 to +85
-35 to +85
250
mA
V
°C
°C
°C
Notes:
1. Derate above 25°C at 0.33 mA/°C.
2. Derate above 25°C at 0.27 mA/°C.
3. Derate above 40 celcius at 0.35 mA/celcius.
4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not
to exceed 5 seconds.
Optical/Electrical Characteristics at TA=25°C
High Efficiency Red
Devices
HDSP-
521E
523E
Parameter
Luminous Intensity/Segment
(Segment Average)[1,2]
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Symbol
Iv
Parameter
Luminous Intensity/Segment
(Segment Average)[1,2]
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Symbol
Iv
Min.
2.28
VF
␭PEAK
␭d
VR
⌬VF/°C
Typ.
4.00
2.05
640
628
Test
Max. Units Conditions
7.69 mcd IF = 10 mA
2.60
5.0
-2
V
IF = 20 mA
nm
nm
IF = 10 mA
V
IR = 100 µA
mV/°C
Green
Devices
HDSP-
521G
523G
VF
␭PEAK
␭d
VR
⌬VF/°C
Min.
2.28
564.5
5.0
Typ.
3.50
2.0
568
570
-2
Test
Max. Units Conditions
5.13 mcd IF = 10 mA
2.4
V
IF = 10 mA
nm
576.5 nm
IF = 10 mA
V
IR = 100 µA
mV/°C
6
Yellow
Devices
HDSP-
521Y
523Y
Parameter
Luminous Intensity/Segment
(Segment Average)[1,2]
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Symbol
Iv
Min.
1.52
VF
␭PEAK
␭d
VR
⌬VF/°C
582.0
5.0
Typ.
2.30
2.1
589
587
-2
Test
Max. Units Conditions
5.13 mcd IF = 10 mA
2.4
V
IF = 20 mA
nm
592.0 nm
IF = 10 mA
V
IR = 100 µA
mV/°C
Notes:
1. Case temperature of the device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ␭d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
Intensity Bin Limits[1] (mcd at 10 mA)
Yellow
Bin Name
F
G
H
I
Min.[2]
1.52
2.28
3.42
NA
Max.[2]
2.28
3.42
5.13
NA
GREEN
Min.[2]
Max.[2]
NA
NA
2.28
3.42
3.42
5.13
NA
NA
HER
Min.[2]
NA
2.28
3.42
5.13
Notes:
1. Bin categories are established for classification of products. Products may not be available in all bin categories.
2. Tolerance for each bin limit is ± 10%.
Color Categories (Dominant Wavelength)
GREEN
Bin Name
3
2
Min.[2]
Bin Name
2
3
Min.[2]
Max.[2]
573.5
576.5
570.5
573.5
YELLOW
587.00
584.50
Max.[2]
589.50
587.00
Notes:
1. Bin categories are established for classification of products. Products may not be available
in all bin categories.
2. Tolerance for each bin limit is ± 1 nM.
Max.[2]
NA
3.42
5.13
7.69
35
30
25
20
GREEN / HER
15
YELLOW
10
5
0
20
30
40
50
60
70
80
90 100
TA – AMBIENT TEMPERATURE – °C
Figure 1. Maximum Allowable DC
Current vs. Ambient Temperature.
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 10 mA)
3.5
3.0
2.5
2.0
HER, YELLOW,
GREEN
1.0
0.5
0
0
5
10
15
20
25
30
35
90
Contrast Enhancement
GREEN
80
For information on contrast
enhancement, please see
Application Note 1015.
70
60
YELLOW
50
40
Soldering/Cleaning
30
HER
20
10
0
1
2
3
5
4
VF – FORWARD VOLTAGE – V
Figure 2. Forward Current vs.
Forward Voltage.
4.0
1.5
IF – FORWARD CURRENT PER SEGMENT – mA
40
40
IF – DC FORWARD CURRENT – mA
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
ηV – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 10 mA PER SEGMENT)
IDC – MAXIMUM DC CURRENT PER SEGMENT – mA
7
1.6
1.5
1.4
YELLOW
HER
1.3
1.2
For information on soldering
LEDs please refer to Application
Note 1027.
GREEN
Device Reliability
1.1
1.0
0.9
0.8
0.7
0.6
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloroethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used
to form the package of plastic
LED parts.
0 10 20 30 40 50 60 70 80 90 100
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 4. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak
Current.
For reliability information, please
see the reliability data sheet
14.2 mm (0.56 inch) General
Purpose Two Digit Seven
Segment Display.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5988-0376EN
July 17, 2004
5988-5378EN