G1564 Global Mixed-mode Technology Inc. Quadruple Rail-to-Rail Operational Amplifiers Features General Description The G1564 is the quadruple rail-to-rail input/output operation amplifiers with the low power, high voltage swing. Operating on supplies ranging from 4.5V to 20V, while current consuming only 3mA / per amplifier, the G1564 is with high unit-gain bandwidth of 30MHz. The G1564 also provides common mode input ability beyond the supply rails, as well as rail-to-rail output capability. This enables this amplifier to offer maximum dynamic range at any supply voltage. Wide Supply Operation Range +4.5V to +20V Beyond the Rails Input Capability Rail-to-Rail Output Swing Low Supply Current, 3mA Per Amplifier (Typical) Low Input Offset Voltage 2mV (Typical) Internal Frequency Compensated for Unit Gain Stable Wide Bandwidth (unit gain) 30MHz High Slew Rate = 150V/μs Large DC Voltage Gain 80dB (Typical) ±180mA Output Short Current Embedded Over-Temperature Protection TSSOP-14 & TSSOP-14 (FD) package available The G1564 also features fast slewing and settling times, as well as a high output drive capability of 65mA (sink and source). These features make these amplifiers ideal for high speed filtering and signal conditioning application. Other applications include battery power, TFT Vcom /Gamma buffers, portable devices, and anywhere low power consumption is important. Applications There is with over temperature protection embedded to avoid the unexpected damages. The G1564 is available in TSSOP-14 & TSSOP-14 (FD) package. Portable Equipment TFT Vcom/Gamma buffers Battery-Powered Equipment ASIC Input or Output Amplifier Low Power/Low Voltage Applications Ordering Information ORDER NUMBER MARKING TEMP. RANGE PACKAGE (Green) G1564D21U G1564 -40°C~ +85°C TSSOP-14 G1564FA1U G1564 -40°C~ +85°C TSSOP-14 (FD) Note: D2:TSSOP-14 FA :TSSOP-14 (FD) 1: Bonding Code U: Tape & Reel Pin Configuration G1564 G1564 VOUTA 1 14 VOUTD VINA- 2 13 VINA+ 3 VCC 4 VINB+ 5 + + + + VOUTA 1 14 VOUTD VIND- VINA- 2 13 VIND- 12 VIND+ VINA+ 3 12 VIND+ 11 VSS VCC 4 11 VSS 10 VINC+ VINB+ 5 10 VINC+ VINB- 6 9 VINC- VOUTB 7 8 VOUTC VINB- 6 9 VINC- VOUTB 7 8 VOUTC TSSOP-14 Thermal Pad TSSOP-14 (FD) Note: Recommend connecting the Thermal Pad to the Pin#11 VSS for excellent power dissipation. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.4 Jul 19, 2010 1