SR1020CT THRU SR10200CT 星合电子 SCHOTTKY BARRIER RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage - 20 to 200 Volts Forward Current - 10.0Amperes FEATURES TO-263 D2PAK Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction Guard ring for overvoltage protection Low power loss ,high efficiency High current capability ,Low forward voltage drop 0.420(10.67) 0.380(9.65) Single rectifier construction 0.190(4.83) 0.160(4.06) High surge capability 0.245(6.22) MIN For use in low voltage ,high frequency inverters, 0.055(1.40) 0.045(1.14) free wheeling ,and polarity protection applications 0.066(1.68) 0.036(0.92) High temperature soldering guaranteed:260 C/10 seconds, 0.360(9.14) 0.25"(6.35mm)from case 0.639(16.22) 0.560(14.22) 0.320(8.13) 1 Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC K 2 0.053(1.34) 0.047(1.20) MECHANICAL DATA 0.131(3.32) 0.090(2.29) 0.095(2.41) 0.037(0.94) 0.027(0.69) 0.083(2.10) Case: JEDEC TO-263 molded plastic body 0.018(0.46) 0.134(3.40) 0.014(0.35) 0.105(2.67) Terminals: Solderable per MIL-STD-202,method 208 Polarity: As marked Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage SR SR SR SR SR SR 1050CT 1060CT 1080CT 10100CT 10150CT 10200CT SR 1020CT SR 1030CT SR 1040CT 20 30 40 50 60 80 14 21 28 35 42 20 30 40 50 60 VRRM VRMS VDC 200 100 150 56 70 105 140 80 100 150 200 Units Volts Volts Volts Per leg Total device I(AV) 5.0 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 150.0 Amps Maximum average forward rectified current(see Fig.1) Maximum instantaneous forward voltage at 10.0 A(Note 1 ) Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T A =25 C T A =125 C VF R Operating junction temperature range TJ TSTG Notes: 1.Pulse test: 300 0.85 0.75 0.2 IR Typical thermal resistance (Note 2) Storage temperature range 0.60 15 50 2.5 JC 0.90 0.95 Volts mA C/W -65 to+150 C -65 to+150 C s pulse width,1% duty cycle 2.Thermal resistance from junction to case 1 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７ SR1020CT THRU SR10200CT 星合电子 SCHOTTKY BARRIER RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage - 20 to 200 Volts Forward Current - 10.0Amperes FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 10.0 150 RESISTIVE OR INDUCTIVE LOAD 8.0 4.0 2.0 0 20 40 60 80 100 120 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) PEAK FORWARD SURGE CURRENT(AMPERES) 6.0 0 TJ=TJMAX 125 0.375" (9.5MM) LEAD LENGTH 100 75 50 25 0 LEAD TEMPERATURE ( C) 1 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG.4-TYPICAL REVERSE CHARACTERISTICS 50 20 10 TJ=150 C TJ=125 C TJ=125 C (mA) 10 INSTANTANEOUS REVERSE CURRENT INSTANTANEOUS FORWARD CURRENT( AMPERES) 10 NUMBER OF CYCLES AT 60Hz PULSE WIDTH=300 S 1% DUTY CYCLE 1 TJ=25 C 0.1 SR1020CT-SR1040CT SR1050CT-SR10200CT 1 TJ=75 C 0.1 0.01 TJ=25 C 0.01 0.2 0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 SR1020CT-SR1040CT SR1050CT-SR10200CT 0.001 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.5-TYPICAL JUNCTION CAPACITANCE FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 SR1020CT-SR1040CT SR1050CT-SR10200CT 100 0.1 1 10 100 REVERSE VOLTAGE. VOLTS 100 10 1 0.1 0.01 0.1 1 10 100 T, PULSE DURATION ,sec. 2 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７