(SINGLE CHIP) 星合电子 SR1020 THRU SR10200 SCHOTTKY BARRIER RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage - 20 to 200 Volts Forward Current - 10.0Amperes FEATURES TO-220AC Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction 0.185(4.70) Guard ring for overvoltage protection Low power loss ,high efficiency 0.410(10.42) 0.161(4.10) 0.388(9.85) 0.147(3.74) DIA 0.175(4.44) 0.055(1.39) 0.045(1.14) High current capability ,Low forward voltage drop 0.113(2.88) 0.102(2.60) Single rectifier construction 0.283(7.20) 0.244(6.20) High surge capability 0.610(15.50) 0.571(14.50) For use in low voltage ,high frequency inverters, PIN free wheeling ,and polarity protection applications 1 High temperature soldering guaranteed:260 C/10 seconds, 0.25"(6.35mm)from case 2 0.159(4.05) 1.161(29.50) 0.140(3.55) 1.106(28.10) 0.053(1.34) / 0.114(2.90) 0.098(2.50) 0.560(14.22) 0.512(13.00) 0.047(1.20) / 0.037(0.94) 0.027(0.68) MECHANICAL DATA 0.023(0.58) 0.014(0.35) Case: JEDEC TO-220AC molded plastic body 0.208(5.28) 0.192(4.88) Terminals: Lead solderable per MIL-STD-750,method 2026 Polarity: As marked Mounting Position: Any Dimensions in inches and (millimeters) Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols SR 1020 SR 1030 SR 1040 SR 1050 SR 1060 SR 1080 SR 10100 SR 10150 SR 10200 20 30 40 50 60 80 100 150 200 14 21 28 35 42 56 70 105 140 20 30 40 50 60 80 100 150 200 Units Maximum DC blocking voltage VRRM VRMS VDC Maximum average forward rectified current (see Fig.1) I(AV) 10.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 150.0 Amps Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum instantaneous forward voltage at 10.0 A(Note 1 ) Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T A =25 C T A =125 C VF R Operating junction temperature range TJ TSTG Notes: 1.Pulse test: 300 0.85 0.75 0.2 IR Typical thermal resistance (Note 2) Storage temperature range 0.60 15 50 2.5 JC 0.90 0.95 Volts Volts Volts Volts mA C/W -65 to+150 C -65 to+150 C s pulse width,1% duty cycle 2.Thermal resistance from junction to case 1 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７ (SINGLE CHIP) 星合电子 SR1020 THRU SR10200 SCHOTTKY BARRIER RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage - 20 to 200 Volts Forward Current - 10.0Amperes FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 12 175 10 150 RESISTIVE OR INDUCTVE LOAD 8 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES FIG.1-FORWARD CURRENT DERATING CURVE 6 4 2 0 0 20 40 60 80 100 120 125 100 75 50 25 150 0.1 1 10 100 LEAD TEMPERATURE ( C) NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 50 10 INSTANTANEOUS FORWARD CURRENT( AMPERES) TJ=125 C (mA) TJ=125 C INSTANTANEOUS REVERSE CURRENT 10 PULSE WIDTH=300 S TJ=25 C 1% DUTY CYCLE 1 0.1 SR1050-SR10200 SR1020-SR1040 1 TJ=75 C 0.1 0.01 TJ=25 C 0.01 SR1050-SR10200 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 SR1020-SR1040 0.001 0 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE% FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/ W FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE(pF) 4000 TJ=25 C f=1.0MHZ Vsig=50mVp-p 1000 SR1050-SR10200 SR1020-SR1040 100 0.1 1 10 100 100 10 1 0.1 0.01 REVERSE VOLTAGE. VOLTS 0.1 1 10 100 T, PULSE DURATION ,sec. 2 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７