LM358 DUAL OPERATIONAL AMPLIFIERS FEATURES ● ● ● ● ● ● ● ● SOP8/ DIP8 PIN Configulation Internally frequency compensated for unity gain Large DC voltage gain : 100dB Wide power supply range : 3V~32V(or±1.5V~16V) Input common-mode voltage range includes ground Large output voltage swing : 0V DC to VCC-1.5V DC Power drain suitable for battery operation Moisture Sensitivity Level 3 LM358G is Halogen Free product SOP-8 PKG Out 1 IN1(-) 2 A IN1 (+) 3 Gnd -+ 8 Vcc 7 Out2 B + 4 - 6 IN2 (-) 5 IN2 (+) DIP-8 PKG ORDERING INFORMATION Device LM358D LM358GD LM358N DUAL OPERATIONAL AMPLIFIERS Package 8 SOP 8 DIP LM358 is consists of four independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltage. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifier, DC gain blocks and all the conventional OP amp circuits which now can be easily implemented in single power supply systems. EQUIVALENT CIRCUIT V+ 100㎂ 6㎂ 6㎂ Q5 Q6 CC Q2 - Q1 Q7 Q3 RSC Q4 INPUTS OUTPUT + Q13 Q11 50㎂ Q10 Q8 Q12 Q9 HTC 2008 - Ver. 1.1 -1- LM358 DUAL OPERATIONAL AMPLIFIERS ABSOLUTE MAXIMUM RATINGS CHARACTERISTIC Supply Voltage SYMBOL VCC VALUE UNIT ±16 or 32 V VI(DIFF) ±32 V VI -0.3 to +32 V Differential Input Voltage Input Voltage Continuous Output Short Circuit to GND VCC≤V TA=25℃ (One Amp) Operating Temperature Range TOPR 0~+70 ℃ Storage Temperature Range TSTG -65 to +150 ℃ Electrical characterisitics at specified free-air temperature, V PARAMETER VIO Input Offset Voltage αVIO Average Temperature Coefficient of Input Offset Voltage IIO Input Offset Current αllo Average Temperature Coefficient of Input Offset Current IIB Input Bias Current VICR Common-Mode Input Voltage Range VOH High-Level Output Voltage VOL Low-Level Output Voltage AVD Large-Signal Differential Voltage Amplification THD Total Harmonic Distortion CMRR Common-Mode Rejection Ratio KSVR Supply Voltage Rejection Ratio(ΔVCC/ΔVIO) V01/V02 Crosstalk Attenuation CC =5V(unless TEST CONDITIONS* VCC=5V to MAX, VIC=VICR MIN, VO=1.4V MIN 25℃ otherwise noted) LM358 TYP 3 9 Full Range Full Range 7 25℃ Full Range 2 Full Range 10 25℃ Full Range 25℃ -20 0toVCC-1.5 Full Range 0toVCC-2 RL ≥2㏀ VCC=MAX, RL =2㏀ VCC=MAX, RL ≥10㏀ 25℃ Full Range V CC-1.5 Full Range 27 RL ≥10㏀ Full Range VO=1.4V VO=1.4V VCC=5V to MAX VCC=15V, VO=1V to 11V, RL ≥2㏀ f=1kHz, Av=20dB, RL=2kΩ Vo=2Vpp, CL=100pF, Vo=2Vpp VCC=5V to MAX, VIC=VICR MIN MAX 7 50 150 Full Range 15 25℃ ㎁ ㎀/℃ -250 -500 ㎁ V V 28 5 25 ㎷ ㎶/℃ 26 25℃ UNIT 20 100 ㎷ V/㎷ 0.02 % 25℃ 65 80 ㏈ VCC=5V to MAX 25℃ 65 100 ㏈ f=1 kHz to 20kHz 25℃ 120 ㏈ VCC=15V, 25℃ -20 -30 VID=1V, VO=0 Full Range -10 IO 25℃ 10 20 VCC=15V, VID=-1V, V O=15V Full Range 5 Output Current VID=-1V, 25℃ 12 30 VO=200㎷ IOS VCC at 5V, 25℃ ±40 GND at -5V, VO=0 Short-Circuit Output Current ICC VO-2.5V, No Load Full Range 0.7 VCC=MAX, Supply Current (Two Amplifiers) 1 Full Range VO=0.5VCC, No Load * All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified <<MAX>> V CC for testing purpose is 30V. Full range is 0℃ to 70℃. ㎃ ㎂ ±60 ㎃ 1.2 2 ㎃ HTC -2- LM358 DUAL OPERATIONAL AMPLIFIERS TYPICAL PERFORMANCE CHARACTERISTICS SUPPLY CURRENT 160 3 2 TA=0℃TO+125℃ 70 60 50 40 V0-OUTPUT SWING(V P-P) V+=30VDC AND -55℃≤TA≤+125℃ 60 40 0 10 100 1K 10K 100K 1M VDC 100K 1K 15 + VIN V0 2K +7 VVD 10 10M 1K 10K FREQUENCY(㎐) RL=≥2KV+=15VDC 2 1 0 3 2 1 0 1M 100K 0 8 EO 10 V+ INPUT 350 OUTPUT 300 TA=+25℃ V+=30VDC 250 0 1 2 3 4 5 t-TIME(㎲) 6 + V＞-OUTPUT VOLTAGE 400 REFERENCED TO (V V DC) eIN V+=+15VDC V 2 V + - 5 IO 4 INDEPENDENT OF+ V 3 TA=+25℃ 2 8 0.001 V+=+30VDC 1 V+ V+/2 + 0.1 IO V0 TA=+25℃ 1 7 40 V+=+5VDC + +/2 6 30 OUTPUT CHARACTERISITICS CURRENT SINKING 7 50㎊ 20 10 TIME(㎲) OUTPUT CHARACTERISITICS CURRENT SOURCING VOLTAGE-FOLLOWER PULSE RESPONSE (SMALL-SIGNAL) 450 40 3 FREQUENCY(㎐) 500 30 15 0 1 20 VOLTAGE-FOLLOWER PULSE RESPONSE 5 V+=10℃ TO 15V DC AND -55℃≤TA≤+125℃ 20 10 SUPPLY VOLTAGE(V DC) V0-OUTPUT VOLTAGE (VDC) VOLTAGE GAIN (㏈ V0 V+/2 80 0 65 85 105 125 4 20 10M + VIN 45 LARGE-SIGNAL FREQUENCY RESPONSE 0.1㎌ 100 25 TEMPERATURE(℃) OPEN-LOOP FREQUENCY RESPONSE 120 0 0 -55 -35 -15 5 40 30 V+ 80 40 SUPPLY VOLTAGE (V DC) 140 RL=2㏀ 30 INPUT VOLTAGE(V) OUTVOLTAGE(V) 20 RL=20㏀ 120 10 TA=-55℃ 10 80 20 0 0 AVOL-VOLTAGE GAIN(㏈ 90 OUTPUT CURRENT(㎃ DC) SUPPLY CURRENT DRAIN(㎃ DC) 4 1 EO-OUTPUT VOLTAGE(㎷ VOLTAGE GAIN CURRENT LIMITING 0.01 0.01 0.1 1 10 IO+-OUTPUT SOURCE CURRENT (㎃DC) 100 0.001 0.01 0.1 1 10 100 IO+-OUTPUT SINK CURRENT (㎃DC) HTC -3- LM358 DUAL OPERATIONAL AMPLIFIERS TYPICAL PERFORMANCE CHARACTERISTICS (CONTINUIED) INPUT CURRENT 15 90 VCM=0VDC IB-INPUT CURRENT(㎁ DC) 80 10 NEGATIVE POSITIVE 5 70 V+=+30VDC 60 50 + V =+15VDC 40 30 20 + VIN -INPUT VOLTAGE(±V DC) CMRR-COMMON-MODE REJECTION RATIO INPUT VOLTAGE RANGE V+=+5VDC 10 0 0 10 5 15 -55 -35 -15 5 25 45 65 COMMON-MODE REJECTION RATIO 120 100 80 + 7.5VDC 100K 60 100 40 + VIN 20 100K 7.5VDC 0 85 105 125 1K 10 TA-TEMPERATURE(℃) V+ OR V--POWER SUPPLY VOLTAGE (±V DC) V0 + 100 10K 100K 1M f-FREQUENCY(㎐) TYPICAL APPLICATIONS V+ RF V+ VIN RIN + 10K V+ 8 VIN V0 4 + V+ 2 RL - 8 V0 4 10K V+ 2 SINGLE SUPPLY INVERTING AMPLIFIER INPUT BIASING VOLTAGE POLLOWER V+ V+ 10K VIN 8 + V0 - 4 10K BLOCKS DC GAIN RI R NON-INVERTING AMPLIFIER HTC -4-