IPT2508-xxH IP Semiconductor Co., Ltd. High current density due to double mesa technology; SIPOS and Glass Passivation. IPT2508-xx series are suitable for general purpose AC Switching. They can be used as an ON/OFF function In application such as static relays, heating regulation, Induction motor stating circuits… or for phase Control operation light dimmers, motor speed Controllers. IPT2508-xx series is 3 Quadrants triacs, This is specially recommended for use on inductive Loads. The IPT2508-xxH (Insulated version) series are isolated internally they provides a 2500V RMS isolation voltage from all three terminals to external heatsink. MAIN FEATURES Symbol Value Unit IT(RMS) 25 A VDRM / VRRM 800 V VTM ≤ 1.55 V TO3P ABSOLUTE MAXIMUM RATINGS Parameter Storage Junction Temperature Range Operating Junction Temperature Range Symbol Value Unit Tstg Tj -40 to +150 -40 to +125 ℃ Repetitive Peak Off-state Voltage Repetitive Peak Reverse Voltage Tj = 25℃ VDRM VRRM 800 800 V Non Repetitive Peak Off-state Voltage Non Repetitive Peak Reverse Voltage Tj = 25℃ VDSM VRSM 900 900 V RMS on–state current (360º conduction angle ) Tc = 100℃ IT(RMS) 25 A ITSM 260 250 A I²t 340 A²s dI / dt 50 A/us IGM 4 A PG(AV) 1 W Non repetitive surge peak on–state Current (full cycle, Tj = 25℃) I²t Value for fusing t = 8.3ms t = 10ms tp = 10ms Critical Rate of rise of on-state current IG = 2 x IGT, tr ≤ 100ns, f = 120Hz, Tj = 125 ℃ Peak gate current tp = 20us, Tj = 125 ℃ Average gate power dissipation Tj = 125 ℃ 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 1 IPT2508-xxH ELECTRICAL CHARACTERISTICS (Tj = 25 ℃ unless otherwise specified) Symbol IGT VGT VGD IL Test Condition IPT2508-xxH Quadrant VD = 12V RL = 33Ω Tj = 25 ℃ VD=VDRM, RL=3.3KΩ, Tj = 125 ℃ dV/dt 35 35 50 I – II – III MAX 1.3 V I – II – III MIN 0.2 V 70 70 80 80 80 100 MAX mA mA IT = 500mA Gate open MAX 50 50 75 mA VD = 67% VDRM gate open Tj = 125 ℃ MIN 500 500 1000 V/us - - - - - - 13 13 22 (dV/dt) c=0.1V/us Tj = 125 ℃ (dI/dt)c DE MAX II IH CE I – II – III I – III IG = 1.2 IGT, Tj = 125 ℃ Unit BE (dV/dt) c=10V/us Tj = 125 ℃ MIN Without snubber Tj = 125 ℃ A/ms STATIC CHARACTERISTICS Symbol Test Conditions Value (MAX) Unit VTM ITM = 28A, t p = 380uS Tj = 25 ℃ 1.55 V IDRM VD = VDRM Tj = 25 ℃ 10 uA IRRM VR = VRRM Tj = 125 ℃ 3 mA THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j – c) Junction to case (AC) 1.1 ℃/W 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 2 IPT2508-xxH PACKAGE MECHANICAL DATA TO-3P Millimeters Min Typ Max A 4.4 4.6 B 1.45 1.55 C 14.35 15.6 D 0.5 0.7 E 2.7 2.9 F 15.8 16.5 G 20.4 21.1 H 15.1 15.5 J 5.45 5.65 K 3.15 3.65 L 4.07 4.17 M 1.35 1.40 N 14.6 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-11 - 237 - 2837, Fax : +82-2-6280-6382, [email protected] 3 IPT2508-xxH IPT2508-xxH 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 4