. . . employing the Schottky Barrier principle in a large metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, low voltage converters, OR’ing diodes, and polarity protection devices. SCHOTTKY BARRIER RECTIFIER 25 AMPERES 15 VOLTS • Very Low Forward Voltage (0.28 V Maximum @ 19 Amps, 70°C) • Guardring for Stress Protection • Highly Stable Oxide Passivated Junction (100°C Operating Junction Temperature) • Epoxy Meets UL94, VO at 1/8″ Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds • Shipped 50 Units Per Plastic Tube • Marking: B2515L 4 1 3 4 1 3 CASE 221B–03, STYLE 1 (TO–220AC) MAXIMUM RATINGS (Per Leg) Rating Symbol Max Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 15 Volts Average Rectified Forward Current (Rated VR) TC = 90°C IF(AV) 25 Amps Peak Repetitive Forward Current, Per Leg (Rated VR, Square Wave, 20 kHz) TC = 90°C IFRM 30 Amps Non Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 Amps Peak Repetitive Reverse Surge Current (2.0 µs, 1.0 kHz) IRRM 1.0 Amps TJ – 65 to +100 °C Tstg – 65 to +125 °C RθJC 2.0 °C/W Operating Junction Temperature Storage Temperature THERMAL CHARACTERISTICS Thermal Resistance — Junction to Case ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1) (IF = 25 Amps, TJ = 25°C) (IF = 25 Amps, TJ = 70°C) (IF = 19 Amps, TJ = 70°C) VF Maximum Instantaneous Reverse Current (1) (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 70°C) IR (1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%. Rectifier Device Data Volts 0.45 0.42 0.28 mA 15 200 MBR2515L PACKAGE DIMENSIONS C B F S T Q 4 A U 1 3 H K L D G R J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B C D F G H J K L Q R S T U INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 CATHODE N/A ANODE CATHODE CASE 221B–03 (TO–220AC) ISSUE B Rectifier Device Data