MUR3020PT, MUR3040PT, MUR3060PT Power Rectifiers These state−of−the−art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. Features • • • • • • • • • Ultrafast 35 and 60 Nanosecond Recovery Time 175°C Operating Junction Temperature High Voltage Capability to 600 V Low Forward Drop Low Leakage Specified @ 150°C Case Temperature Current Derating Specified @ Both Case and Ambient Temperatures Epoxy Meets UL 94 V−0 @ 0.125 in High Temperature Glass Passivated Junction Pb−Free Packages are Available* ULTRAFAST RECTIFIERS 30 AMPERES, 200−600 VOLTS 3 4 4 • Case: Epoxy, Molded • Weight: 4.3 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads • • 2 MARKING DIAGRAM Mechanical Characteristics: are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds Shipped 30 Units Per Plastic Tube 1 1 AYWWG MUR30x0PT SOT−93 (TO−218) CASE 340D STYLE 2 2 3 A = Y = WW = G = MUR30x0PT = Assembly Location Year Work Week Pb−Free Package Device Code x = 2, 4, or 6 ORDERING INFORMATION Device MUR3020PT MUR3020PTG MUR3040PT MUR3040PTG MUR3060PT MUR3060PTG www.kersemi.com Package Shipping SOT−93 30 Units/Rail SOT−93 (Pb−Free) 30 Units/Rail SOT−93 30 Units/Rail SOT−93 (Pb−Free) 30 Units/Rail SOT−93 30 Units/Rail SOT−93 (Pb−Free) 30 Units/Rail MUR3020PT, MUR3040PT, MUR3060PT MAXIMUM RATINGS (Per Leg) Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR) Per Leg Per Device Symbol MUR3020PT MUR3040PT MUR3060PT Unit VRRM VRWM VR 200 400 600 V IF(AV) 15 @ TC = 150°C 30 @ TC = 150°C 15 @ TC = 145°C 30 @ TC = 145°C 30 @ TC = 150°C 30 @ TC =145°C A Peak Rectified Forward Current, Per Leg (Rated VR, Square Wave, 20 kHz) IFRM Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Per Leg IFSM 200 A TJ, Tstg − 65 to +175 °C RqJC RqJA 1.5 40 Operating Junction and Storage Temperature A THERMAL CHARACTERISTICS (Per Diode Leg) Maximum Thermal Resistance, − Junction−to−Case − Junction−to−Ambient °C/W ELECTRICAL CHARACTERISTICS (Per Diode Leg) Maximum Instantaneous Forward Voltage (Note 1) (IF = 15 Amp, TC = 150°C) (IF = 15 Amp, TC = 25°C) VF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 150°C) (Rated DC Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms) trr http://kersemi.com 2 V 0.85 1.05 1.12 1.25 1.2 1.5 500 10 35 1000 10 60 mA ns MUR3020PT, MUR3040PT, MUR3060PT MUR3020PT 100 100 100°C IR , REVERSE CURRENT ( μ A) TJ = 150°C 25°C 50 30 10 100°C 2 1 0.5 25°C 0.2 0.1 0.05 0.02 0.01 5 0 40 60 80 100 120 140 160 VR, REVERSE VOLTAGE (VOLTS) 180 200 2 1 0.5 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1 1.2 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.4 1.6 16 14 dc 12 10 SQUARE WAVE 8 6 4 RATED VOLTAGE APPLIED 2 0 140 Figure 1. Typical Forward Voltage (Per Leg) 14 dc 12 RqJA = 15°C/W AS OBTAINED USING A SMALL FINNED HEAT SINK. 10 8 6 SQUARE WAVE dc 4 SQUARE WAVE 2 RqJA = 40°C/W AS OBTAINED IN FREE AIR WITH NO HEAT SINK. 0 0 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (5C) 180 150 160 170 TC, CASE TEMPERATURE (5C) 180 Figure 3. Current Derating, Case (Per Leg) 200 P F(AV) , AVERAGE POWER DISSIPATION (WATTS) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 20 Figure 2. Typical Reverse Current (Per Leg) 3 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 TJ = 150°C 50 20 10 5 16 I (RESISTIVE LOAD) PK = π IAV 14 I (CAPACITIVE LOAD) PK = 5 IAV 12 10 dc 10 8 20 6 SQUARE WAVE 4 TJ = 125°C 2 0 0 Figure 4. Current Derating, Ambient (Per Leg) 2 4 6 8 10 12 14 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 5. Power Dissipation (Per Leg) http://kersemi.com 3 16 MUR3020PT, MUR3040PT, MUR3060PT MUR3040PT 100 50 50 20 10 5 100°C TJ = 150°C 30 25°C 10 5 TJ = 150°C 100°C 25°C 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0 50 3 1 0.5 0.3 0.2 0.4 0.6 0.8 1 1.2 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.4 1.6 dc 12 RqJA = 15°C/W AS OBTAINED USING A SMALL FINNED HEAT SINK. 10 SQUARE WAVE dc 4 SQUARE WAVE 2 RqJA = 40°C/W AS OBTAINED IN FREE AIR WITH NO HEAT SINK. 0 0 20 40 60 80 100 120 140 160 180 200 P F(AV) , AVERAGE POWER DISSIPATION (WATTS) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 250 300 350 400 450 500 14 dc 12 10 SQUARE WAVE 8 6 4 RATED VOLTAGE APPLIED 2 0 140 150 160 170 TC, CASE TEMPERATURE (5C) 180 Figure 8. Current Derating, Case (Per Leg) 14 6 200 16 Figure 6. Typical Forward Voltage (Per Leg) 8 150 Figure 7. Typical Reverse Current (Per Leg) 2 0.1 0.2 100 VR, REVERSE VOLTAGE (VOLTS) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 IR , REVERSE CURRENT ( μ A) 100 16 I (RESISTIVE-INDUCTIVE LOAD) PK = π IAV I (CAPACITIVE LOAD) PK = 5 IAV 14 12 dc 10 10 20 SQUARE WAVE 8 6 4 TJ = 125°C 2 0 0 2 4 6 8 10 12 14 TA, AMBIENT TEMPERATURE (5C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient (Per Leg) Figure 10. Power Dissipation (Per Leg) http://kersemi.com 4 16 MUR3020PT, MUR3040PT, MUR3060PT MUR3060PT 100 IR , REVERSE CURRENT ( μ A) 200 100 50 50 TJ = 150°C 30 100°C 25°C 10 25°C 0.2 0.1 0.05 0.02 150 5 200 250 300 350 400 450 500 VR, REVERSE VOLTAGE (VOLTS) 550 600 650 Figure 12. Typical Reverse Current (Per Leg) 3 2 1 0.5 0.3 0.2 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 SQUARE WAVE 10 8 6 4 RATED VOLTAGE APPLIED 2 0 140 150 160 170 Figure 13. Current Derating, Case (Per Leg) dc RqJA = 16°C/W AS OBTAINED FROM A SMALL TO-220 HEAT SINK. SQUARE WAVE 6 5 4 dc 12 Figure 11. Typical Forward Voltage (Per Leg) 8 7 14 TC, CASE TEMPERATURE (5C) 10 9 16 vF, INSTANTANEOUS VOLTAGE (VOLTS) P F(AV) , AVERAGE POWER DISSIPATION (WATTS) I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 100°C 2 1 0.5 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 TJ = 150°C 20 10 5 dc 3 SQUARE WAVE RqJA = 60°C/W 1 AS OBTAINED IN FREE AIR 0 WITH NO HEAT SINK. 20 40 60 80 100 120 140 0 TA, AMBIENT TEMPERATURE (5C) 2 160 180 200 16 I (CAPACITIVE LOAD) PK = 5 IAV 14 dc 10 12 10 20 SQUARE WAVE 8 (RESISTIVE-INDUCTIVE LOAD) IPK = π IAV TJ = 125°C 6 4 2 0 0 Figure 14. Current Derating, Ambient (Per Leg) 2 4 6 8 10 12 14 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 15. Power Dissipation (Per Leg) http://kersemi.com 5 180 16 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR3020PT, MUR3040PT, MUR3060PT 1 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 0.05 P(pk) t1 t2 SINGLE PULSE DUTY CYCLE, D = t1/t2 0.02 0.02 0.05 0.1 0.2 0.5 1 2 5 t, TIME (ms) 10 20 50 Figure 16. Thermal Response 1K 500 C, CAPACITANCE (pF) 0.01 0.01 ZqJC(t) = r(t) RqJC RqJC = 1.5°C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) - TC = P(pk) ZqJC(t) TJ = 25°C 200 100 50 20 10 1 2 5 10 20 VR, REVERSE VOLTAGE (VOLTS) 50 Figure 17. Typical Capacitance (Per Leg) http://kersemi.com 6 100 100 200 500 1K MUR3020PT, MUR3040PT, MUR3060PT PACKAGE DIMENSIONS SOT−93 (TO−218) CASE 340D−02 ISSUE E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. C Q B U S E DIM A B C D E G H J K L Q S U V 4 A L 1 K 2 3 D J H MILLIMETERS MIN MAX --20.35 14.70 15.20 4.70 4.90 1.10 1.30 1.17 1.37 5.40 5.55 2.00 3.00 0.50 0.78 31.00 REF --16.20 4.00 4.10 17.80 18.20 4.00 REF 1.75 REF STYLE 2: PIN 1. 2. 3. 4. V G http://onsemi.com 7 INCHES MIN MAX --0.801 0.579 0.598 0.185 0.193 0.043 0.051 0.046 0.054 0.213 0.219 0.079 0.118 0.020 0.031 1.220 REF --0.638 0.158 0.161 0.701 0.717 0.157 REF 0.069 ANODE 1 CATHODE(S) ANODE 2 CATHODE(S) http://kersemi.com