MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 Power Rectifiers This series is designed for use in switching power supplies, inverters and as free wheeling diodes, these state−of−the−art devices have the following features: ULTRAFAST RECTIFIERS 8.0 AMPERES 50−600 VOLTS Features • • • • • • • • • http://kersemi.com Ultrafast 25, 50 and 75 Nanosecond Recovery Time 175°C Operating Junction Temperature Popular TO−220 Package Epoxy Meets UL 94 V−0 @ 0.125 in Low Forward Voltage Low Leakage Current High Temperature Glass Passivated Junction Reverse Voltage to 600 Volts Pb−Free Packages are Available* 1 4 3 4 Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: • 260°C Max. for 10 Seconds Shipped 50 units per plastic tube CASE 221B TO−220AC PLASTIC 1 3 MARKING DIAGRAM AYWW U8xx KA A Y WW U8 xx KA = Assembly Locarion = Year = Work Week = Device Code = 10, 15, 20, 40 or 60 = Location Code 1 MUR820/D MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR Symbol 805 810 815 820 840 860 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 400 600 V Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C IF(AV) 8.0 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150°C IFM 16 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 A TJ, Tstg −65 to +175 °C Rating Operating Junction Temperature and Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Maximum Thermal Resistance, Junction−to−Case RJC 3.0 °C/W 2.0 ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (Note 1) (iF = 8.0 Amps, TC = 150°C) (iF = 8.0 Amps, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 150°C) (Rated dc Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 Amp, di/dt = 50 Amps/s) (IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 Amp) trr V 0.895 0.975 1.00 1.30 1.20 1.50 A 250 5.0 500 10 35 25 60 50 ns 1. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%. ORDERING INFORMATION Package Shipping† MUR805 TO−220 50 Units / Rail MUR810 TO−220 50 Units / Rail MUR815 TO−220 50 Units / Rail TO−220 (Pb−Free) 50 Units / Rail TO−220 50 Units / Rail TO−220 (Pb−Free) 50 Units / Rail TO−220 50 Units / Rail TO−220 (Pb−Free) 50 Units / Rail TO−220 50 Units / Rail TO−220 (Pb−Free) 50 Units / Rail Device MUR815G MUR820 MUR820G MUR840 MUR840G MUR860 MUR860G Packaging http://kersemi.com 2 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR805, MUR810, MUR815, MUR820 1000 100 IR, REVERSE CURRENT ( A) 70 50 20 10 100°C 1.0 25°C 0.1 10 0.01 7.0 0 20 40 60 100 140 120 160 180 200 Figure 2. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 2.0 TJ = 175°C 100°C 25°C 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 10 9.0 RATED VR APPLIED 8.0 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) RJA = 16°C/W RJA = 60°C/W (NO HEAT SINK) 10 SQUARE WAVE 8.0 6.0 4.0 dc 2.0 SQUARE WAVE 0 0 20 40 60 80 100 120 140 180 Figure 3. Current Derating, Case 14 dc 170 TC, CASE TEMPERATURE (°C) Figure 1. Typical Forward Voltage 12 160 150 vF, INSTANTANEOUS VOLTAGE (VOLTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 80 VR, REVERSE VOLTAGE (VOLTS) 5.0 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 175°C 100 160 180 200 10 9.0 TJ = 175°C 8.0 7.0 SQUARE WAVE 6.0 dc 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 4. Current Derating, Ambient Figure 5. Power Dissipation http://kersemi.com 3 9.0 10 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR840 100 1000 IR, REVERSE CURRENT ( A) 70 50 20 10 100°C 25°C 1.0 0.1 10 0.01 7.0 0 50 100 150 200 250 300 350 400 450 500 VR, REVERSE VOLTAGE (VOLTS) 5.0 TJ = 175°C Figure 7. Typical Reverse Current* 25°C * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 100°C 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.6 0.8 1.0 1.2 1.4 8.0 SQUARE WAVE dc SQUARE WAVE 0 0 20 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 160 150 170 Figure 8. Current Derating, Case dc 2.0 dc 7.0 Figure 6. Typical Forward Voltage 12 4.0 RATED VR APPLIED 8.0 TC, CASE TEMPERATURE (°C) RJA = 16°C/W RJA = 60°C/W (NO HEAT SINK) 6.0 9.0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 14 10 10 1.6 PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.4 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 150°C IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 175°C 100 40 60 80 100 120 140 160 180 200 10 9.0 TJ = 175°C 8.0 SQUARE WAVE 7.0 dc 6.0 5.0 4.0 3.0 2.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 9. Current Derating, Ambient Figure 10. Power Dissipation http://kersemi.com 4 180 9.0 10 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR860 1000 100 IR, REVERSE CURRENT ( A) 70 50 TJ = 150°C 20 100°C 25°C 100°C 1.0 25°C 0.1 0.01 100 7.0 200 300 500 400 600 VR, REVERSE VOLTAGE (VOLTS) 5.0 Figure 12. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 RJA = 16°C/W RJA = 60°C/W (NO HEAT SINK) 7.0 SQUARE WAVE 5.0 dc 3.0 2.0 SQUARE WAVE 1.0 0 0 20 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.0 0 140 150 160 180 170 Figure 13. Current Derating, Case dc 4.0 RATED VR APPLIED 8.0 Figure 11. Typical Forward Voltage 8.0 6.0 9.0 TC, CASE TEMPERATURE (°C) 10 9.0 10 vF, INSTANTANEOUS VOLTAGE (VOLTS) PF(AV) , AVERAGE POWER DISSIPATION (WATTS) 0.4 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 10 10 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 30 TJ = 150°C 100 40 60 80 100 120 140 160 180 200 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 SQUARE WAVE dc TJ = 175°C 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 14. Current Derating, Ambient Figure 15. Power Dissipation http://kersemi.com 5 9.0 10 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 ZJC(t) = r(t) RJC RJC = 1.5°C/W MAX P(pk) 0.05 t2 SINGLE PULSE 0.02 0.01 0.01 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) − TC = P(pk) ZJC(t) t1 DUTY CYCLE, D = t1/t2 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 t, TIME (ms) Figure 16. Thermal Response 1000 500 C, CAPACITANCE (pF) r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 TJ = 25°C 200 100 50 20 10 1.0 2.0 5.0 20 10 VR, REVERSE VOLTAGE (VOLTS) Figure 17. Typical Capacitance http://kersemi.com 6 50 100 100 200 500 1000 MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J http://kersemi.com 7 INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27