BNC Series BNC Type Connectors ●BNC series is most widely used as 50 Ω coaxial cable connectors. ●This series is used specially for interface of fre- quent fit-in/pull-out instruments by small size/ light weight bayonet lock mechanism. Note: BNC series is intermateable with BNC75 series. (75Ω group) ●If 75 Ω cable is used for this series, the frequency to be applied must be below 200MHz. For more than 200MHz, BNC75 series must be used. CONFORMING STANDARD JIS-C-5412、 MIL-C-39012、 DSP-C-6202、 NTTSpec No.2095 SPECIFICATION Characteristic Impedance 50Ω Dielectric withstanding voltage 1500V AC (rms) for 1 minute Insulation resistance 1000MΩmin. at 500V DC Contact resistance 3mΩ max. VSWR 1.3max. at DC～2GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Copper alloy/Silver or Nickel plating Contact (male) Copper alloy/Silver or Gold plating Contact (female) Copper alloy/Silver or Gold plating Insulators PTFE Gaskets Silicone rubber Please ask us for the cable assemblies to assure its performance. ● 1● BNC Series Unit : mm ■ Plug Clamp Type φA φ14.5 P/N 3D-2V BNC-P-3 3C-2V （L） BNC-P-3-Ni BNC-P-3-NiCAu BNC-P-58U BNC-P-58U-Ni φ14.5 φA 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U Shell Contact 25.0 Ag Ag 6.4 25.0 Ni Ag 6.4 25.0 Ni Au 5.4 27.0 Ag Ag 5.4 27.0 Ni Ag 6.6 26.2 Ag Ag RG-62/U 6.6 26.2 Ni Ag 6.55 24.6 Ag Ag 6.55 24.6 Ni Ag φA (L) 7.1 7.1 BNC-P-3W (L) BNC-P-3W-Ni-1 φ14.5 3D-2V 6.4 Finish RG-62/U P/N φA 3C-2V （L） BNC-P-62U-Ni UG-260/U-Ni φ17.5 3D-2V φA BNC-P-62U UG-260/U RG-59/U RG-62/U RG-59/U RG-62/U Applicable Cable 3D-2W 3C-2W 3D-2W 3C-2W Finish Shell Contact 29.1 Ag Ag 29.1 Ni Ag BNC-P-3CT 3C-2T 8.0 30.0 Ag Ag BNC-P-3CT-Ni 3C-2T 8.0 30.0 Ni Ag Applicable Cable φA (L) 8.6 P/N 5D-2V BNC-P-5 (L) Applicable Cable 5C-2V BNC-P-5-Ni BNC-P-5W BNC-P-5W-Ni 5D-2V 5C-2V 5D-2W 5C-2W 5D-2W 5C-2W BNC-P-5CFB 5C-FB Finish Shell Contact 37.0 Ag Ag 8.6 37.0 Ni Ag 9.2 37.0 Ag Ag 9.2 37.0 Ni Ag 8.6 37.0 Ni Ag Ag BNC-SP-5DFB 5D-FB 8.1 39.0 Ni BNC-P-5C2T 5C-2T 10.1 37.0 Ag Ag BNC-P-7 7C-2V 11.25 37.0 Ag Ag BNC-P-7-Ni 7C-2V 11.25 37.0 Ni Ag ● 2● BNC Series Unit : mm ■ Plug φA φ14.5 Crimp Type Applicable Cable P/N 1.5D-2V BNC-P-1.5V-CR 1.5C-2V (31.7) 1.5D-2V BNC-P-1.5V-CR-Ni 1.5C-2V 2.5D-2V BNC-P-2.5V-CR 2.5C-2V 2.5D-2V BNC-P-2.5V-CR-Ni 2.5C-2V φ14.5 Ag CR-H-1100 5.5 Ni Ag CR-H-1100 5.5 Ag Ag CR-H-1100 5.5 Ni Ag CR-H-1100 Ag CR-H-1100 BNC-P-179U-CR-Ni RG-179/U 5.5 Ni Ag CR-H-1100 5.5 Ni Au CR-H-1100 5.5 Ni Au CR-H-1100 RG-188A/U 5.5 Ni Au CR-H-1100 RG-174/U 5.5 Ni Au CR-H-1100 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V P/N Applicable Cable φA （L） BNC-P-1.5CQEW-CR10 1.5C-QEW 5.5 BNC-P-1.5D-CR10 1.5D-XV 1.5D-QEV Finish Shell Contact Hand Crimp Tool P/N Note 24.3 Ni Au CR-H-1100 Deltamate 4.0 23.3 Ni Au CR-H-1120 Deltamate BNC-P-3C-CR10-BOOT 3C-2V 7.1 24.3 Ni Au CR-H-1116 Deltamate BNC-P-3D-CR10-BOOT 3D-2V 7.1 24.3 Ni Au CR-H-1116 Deltamate 6.3 24.3 Ni Au CR-H-1115 ― 4.8 29.2 Ni Au CR-H-1156 ― 5.5 24.0 Ni Ag CR-H-1100 ― 1.5D-QEW 5.5 24.3 Ni Au CR-H-1100 Deltamate 3D-2V 7.1 24.3 Ni Au CR-H-1116 ― BNC-P-58U-CR10 BNC-SP-1.5DW-CR1 BNC-SP-1.5D2W-CR10-1 BNC-P-1.5D2W-CR10-201 BNC-P-3D-CR10 RG-58/U RG-58A/U 1.5D-QEW 1.5D-QEW 1.5D-2W Applicable Cable φA (L) BNC-P-3C-CR1 3C-2V 7.0 BNC-P-3C-CRI-Ni 3C-2V BNC-P-5C-CR10 5C-2V BNC-P-5C-CR10-B 5C-2V P/N φ14.5 Ag Ag BNC-P-174U-CR φA 5.5 5.5 BNC-P-188A/U φA Hand Crimp Tool P/N RG-179/U BNC-P-2.5V-CR-NiCAu (L) Contact BNC-P-179U-CR BNC-P-1.5V-CR-NiCAu （L） Finish Shell φA ● 3● Finish Shell Contact Hand Crimp Tool P/N Note 28.0 Ag Ag CR-H-1102 ― 7.0 28.0 Ni Ag CR-H-1102 ― 9.5 28.7 Ni Au CR-H-1130 boot (W) 9.5 28.7 Ni Au CR-H-1130 boot (B) BNC Series Unit : mm ■ Right Angle Plug Clamp Type （25） P/N 3D-2V BNC-LP-3 3C-2V φA BNC-LP-3-CAu （33） BNC-LP-3-NiCAu BNC-LP-3-Ni 3C-2V 3D-2V 3C-2V 3D-2V 3C-2V 5C-2V BNC-LP-5-Ni BNC-LP-58U BNC-LP-58U-Ni BNC-LP-55U P/N （27） 3D-2V 5D-2V BNC-LP-5 5D-2V 5C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U Applicable Cable 5D-2V BNC-LP-5 5C-2V BNC-LP-5-Ni （33） Applicable Cable 5D-2V 5C-2V φA Finish Shell Contact 6.4 Ag Ag 6.4 Ag Au 6.4 Ni Au 6.4 Ni Ag 8.6 Ag Ag 8.6 Ni Ag 5.38 Ag Ag 5.38 Ni Ag 5.4 Ag Ag Finish Shell Contact Ag Ag Ni Au （40） （φ14.3） （33） P/N BNC-LP-5D2W （φ17.5） ● 4● Applicable Cable 5D-2V 5C-2V Finish Shell Contact Ni Au BNC Series Unit : mm ■ Jack Clamp Type φA P/N 3D-2V BNC-J-3 (L) 3C-2V 3D-2V BNC-J-3-Ni 3C-2V RG-55/U BNC-J-58U RG-58/U RG-59/U BNC-J-62U RG-62/U RG-59/U φ17.5 UG-261/U RG-62/U P/N 15.8 Applicable Cable Applicable Cable 5D-2V BNC-J-5 5C-2V （38.0） φA (L) 6.4 Finish Shell Contact 28.5 Ag Ag 6.4 28.5 Ni Ag 5.4 28.6 Ag Ag 6.55 28.6 Ag Ag 6.6 28.6 Ag Ag Finish Shell Contact Ag Ag Crimp Type Applicable Cable φA P/N BNC-J-2.5-CR （34.5） BNC-J-1.5V-CR BNC-J-58U-CR1 ● 5● 2.5D-2V 2.5C-2V 1.5D-2V 1.5D-QEV RG-55/U RG-58/U Finish Shell Contact Hand Crimp Tool P/N 5.5 Ag Ag CR-H-1100 5.5 Ag Ag CR-H-1100 6.3 Ag Ag CR-H-1105 φA BNC Series Unit : mm ■ Panel Jack Clamp Type 4-φB φA 12.7 □ 17.5 P/N 2.3 15.8 (L) 3D-2V BNC-PJ-3 3C-2V 12.7 BNC-PJ-3-Ni Mounting Hole +0.1 4-φ3.0 -0 BNC-PJ-58U BNC-PJ-58U-Ni 12.7 ± 0.05 +0.1 φ11.5 -0 BNC-PJ-58U-NiCAu 12.7 ± 0.05 Applicable Cable BNC-PJ-62U 3D-2V 3C-2V RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U RG-55/U RG-58/U φA （L） φB 6.4 28.5 6.4 Contact 3.0 Ag Ag 28.5 3.0 Ni Ag 5.4 27.0 3.0 Ag Ag 5.4 27.0 3.0 Ni Ag 5.4 27.0 3.0 Ni Au 6.55 28.6 3.0 Ag Ag 4-φ3.0 13.5 φ14.0 P/N 3D-2W BNC-PJ-3W 2.3 15.8 (31.0) 13.5 □ 19.0 Applicable Cable 3C-2W BNC-PJ-3W-Ni-1 Mounting Hole 3D-2W 3C-2W Finish Shell Finish Shell Contact Ag Ag Ni Ag 13.5 ± 0.05 4-M2.6 × 0.45 +0.1 φ14.5 -0 13.5 ± 0.05 18.2 φ17.5 4-φ3.2 2 15.77 (L) 18.2 □ 25.3 P/N 5D-2V BNC-PJ-5 5C-2V BNC-PJ-5D2W Mounting Hole +0.1 18.2 ± 0.05 4-φ3.2 -0 +0.1 φ11.5 -0 Applicable Cable 18.2 ± 0.05 ● 6● 5D-2W 5C-2W (L) Finish Shell Contact 38.0 Ag Ag 40.6 Ag Ag BNC Series Unit : mm ■ Panel Jack Crimp Type 4-φ3.0 Applicable Cable 12.7 2.3 □ 17.5 φ5.5 P/N BNC-PJ-1.5V-CR 15.8 12.7 （34.5） BNC-PJ-1.5V-CR-Ni Mounting Hole R BNC-PJ-2.5V-CR +0.1 4-φ3.0 -0 12.7 ± 0.05 BNC-PJ-2.5V-CR-Ni +0.1 φ11.5 -0 1.5D-2V 1.5C-2V 1.5D-2V 1.5C-2V 2.5D-2V 2.5C-2V 2.5D-2V 2.5C-2V Finish Shell Contact Hand Crimp Tool P/N Mounting Hole Ag Ag CR-H-1100 R Ni Ag CR-H-1100 R Ag Ag CR-H-1100 R Ni Ag CR-H-1100 R BNC-PJ-179BU-CR RG-179B/U Ag Ag CR-H-1100 R BNC-PJ-1.5W-CR-DI 1.5D-QEW Ni Au CR-H-1100 N BNC-PJ-1.5W-CR-Ni 1.5D-QEW Ni Ag CR-H-1100 N 12.7 ± 0.05 Mounting Hole N +0.1 12.7 ± 0.05 4-φ3.0 -0 +0.1 φ12.0 -0 12.7 ± 0.05 φ10 φ6 12.7 □ 17.5 4-φ3.0 2.29 Applicable Cable Shell Contact Hand Crimp Tool P/N BNC-PJ-1.5DW-CR1 1.5D-QEW Ni Au CR-H-1156 12.7 15.77 （30.1） Mounting Hole +0.1 12.7 ± 0.05 4-φ3.0 -0 +0.1 φ11.5 -0 Finish P/N 12.7 ± 0.05 ● 7● BNC Series Unit : mm ■ Receptacle 4-φB φ1.4 12.7 P/N 2.3 15.8 26.3 Finish φB Shell Contact BNC-R 3.1 Ag Ag 12.7 BNC-R-Ni 3.1 Ni Ag □ 17.5 UG-290/U M2.6 Ag Ag UG-290/U-Ni-1 M2.6 Ni Ag Mounting Hole 4-φ3.0 +0.1 φ9.0 12.7 ± 0.05 -0 +0.1 -0 12.7 ± 0.05 12.7 23.4 φ1.1 4-φ3.0 12.7 Finish Shell Contact BNC-LR Ag Ag BNC-LR-Ni Ni Ag 23 Mounting Hole 4-φ3.0 +0.1 φ9.0 12.7 ± 0.05 -0 +0.1 -0 12.7 ± 0.05 □ 15.0 P/N 2.3 2.5 Finish PCB Mounting Dimensions 5-φ1.2 Contact BNC-R-PC-4 Ni Ag Locating pins(4pcs):Tinlead plating BNC-R-PC-4-Ag Ni Ag Locating pins(4pcs):Ag plating BNC-R-PC-4-CAu Ni Au Locating pins(4pcs):Tinlead plating +0.1 -0 +0.1 10.16 -0 5.08 Note Shell 13.3 ± 0.05 □ 17.5 P/N 5.08 ± 0.05 +0.1 10.16 -0 ● 8● BNC Series Unit : mm ■ Receptacle P/N 23.4 10.16 □ 15.0 10.16 BNC-LR-PC-4 Finish Shell Contact Ni Ag 2.5 19.1 PCB Mounting Dimensions 10.16 -0 +0.1 5.08 ± 0.05 5-φ1.2 +0.1 -0 5.08 ± 0.05 +0.1 10.16 -0 4-φ3.0 12.7 φ1.1 P/N 18.0 （28.5） Contact BNC-PR Ag Ag BNC-PR-Ni Ni Ag 12.7 □ 17.5 Mounting Hole 4-φ3.2 +0.1 -0 φ9.0 12.7 ± 0.05 2.3 +0.1 -0 Finish Shell 12.7 ± 0.05 ● 9● Note Locating pins(4pcs):Tinlead plating BNC Series Unit : mm ■ Bulkhead Receptacle Hex.12.7 φ1.4 φ12.7 P/N 1.5 12.6 26.3 Finish Shell Contact BNC-RB2 Ag Ag BNC-RB2-Ni Ni Ag BNC-RB2-NiCAu Ni Au Panel Thickness:1.2 ～ 3.5 10.3 Mounting Hole +0.1 φ11.3 -0 Hex.12.7 φ1.4 φ12.7 P/N 1.5 Finish Shell Contact UG-625/U Ag Ag UG-625/U-Ni Ni Ag 12.6 26.3 Panel Thickness:1.2 ～ 3.5 10.3 Mounting Hole +0.1 φ11.3 -0 Hex.12.7 φ1.1 φ14.3 P/N 1.0 Finish Shell Contact UG-604/U Ag Ag UG-604/U-Ni-1 Ni Ag 13.7 26.3 Panel Thickness:0.7 ～ 2.4 Mounting Hole +0.1 φ9.6 -0 +0.1 8.5 -0 ● 10 ● BNC Series Unit : mm ■ Bulkhead Receptacle Hex.12.7 φ1.3 φ14.5 P/N Finish Contact UG-657/U Ag Ag Moisture-Proof Type with flange and O ring UG-657/U-Ni Ni Ag Moisture-Proof Type with flange and O ring 2.44 15.1 33 Note Shell Panel Thickness:2.2 ～ 6.0 Mounting Hole φ9.92 +0.1 -0 +0.1 8.8 -0 Hex.12.7 φ1.6 φ12.7 P/N 1.2 11.9 Finish Shell Contact UG-1094/U Ag Ag UG-1094/U-D1 Ni Au 27 Panel Thickness:2.2 ～ 3.1 φ9.6 8.8 -0 +0.1 Mounting Hole +0.1 -0 Hex.12.7 φ1.3 φ14.5 P/N Finish Contact BNC-RBP1 Ag Ag Moisture-Proof Type with flange and O ring BNC-RBP1-Ni Ni Ag Moisture-Proof Type with flange and O ring 2.5 15.2 32.6 Note Shell Panel Thickness:2.6 ～ 6.4 Mounting Hole +0.1 φ9.6 -0 +0.1 8.5 -0 ● 11 ● BNC Series Unit : mm ■ Bulkhead Receptacle Hex.12.7 2.3 17.4 φ14.7 φ1.1 φ14.4 P/N Finish Note Shell Contact BNC-RB Ag Ag with flange and O ring BNC-RB-Ni Ni Ag with flange and O ring 33 Panel Thickness:2.2 ～ 7.0 Mounting Hole +0.1 φ9.6 -0 +0.1 8.5 -0 ● 12 ● BNC Series Unit : mm ■ Cap A P/N Finish A Ag 17.9 BNC-C-Ni Ni 17.9 CW-123A/U Ag 18.5 CW-123A/U-Ni Ni 18.5 BNC-CS Ag 17.8 BNC-CS-Ni Ni 17.8 φ 3. 7 （57） BNC-C P/N BNC-JC Ag BNC-JC-Ni Ni （90） （20.5） Finish ● 13 ●