AUK CORP. SA1316-H 1. Features ◆ 1.6mm(L)×0.8mm(W) small size surface mount type ◆ Thin package of 0.55mm(H) thickness ◆ Transparent clear lens optic ◆ Low power consumption type chip LED 2. Applications ◆ LCD backlighting ◆ Keypad backlighting ◆ Symbol backlighting ◆ Front panel indicator lamp 3. Outline Dimensions unit : mm The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SA1316-H 4. Absolute Maximum Ratings (Ta=25oC) Characteristic Symbol Rating Unit Power dissipation PD 60 mW Forward current IF 25 mA *1 Peak forward current IFP 50 mA Reverse voltage VR 4 V Operating temperature range Topr Storage temperature range Tstg *2 Soldering temperature Tsol ∼80 -30∼100 -25 °C °C 240°C for 10 seconds *1. Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended reflow soldering temperature profile - Preheating 150 to 185 within 120 seconds soldering 240 10 seconds Gradual cooling (Avoid quenching) ℃ ℃ ℃ within ℃) Temp ( Peak Temp max. 240 240 ℃ Preheating area 150~185 , 90±30sec ℃ 185 220 150 max. 3 max. 4 Time from 25 25 0 max. 10sec Solder area , max. 60sec ℃ ℃/sec max. -6 ℃/sec ℃/sec ℃ to Peak Temperature max. 6min 60 150 180 240 Time (sec) The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SA1316-H 5. Electrical / Optical Characteristics (Ta=25oC) Characteristic Symbol Test Condition Min Typ Max Unit Forward voltage VF IF= 20mA - 2.0 2.4 V *3 Luminous intensity IV IF= 20mA 27 - 155 mcd Peak wavelength λP IF= 20mA 632 635 641 nm Spectrum bandwidth ∆λ IF= 20mA - 35 - nm Reverse current IR VR=4V - - 10 uA - ±65 - - ±70 - X *4 Half angle θ/2 IF= 20mA deg Y *3. The test result of IF=20mA is only for reference *4. θ/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ◆V F / IV / ℃ λP Grade Classification (Ta=25 ) Test Condition @IF = 20mA Luminous Intensity [mcd] Peak Wavelength [nm] B : 27~43 a : 632~635 C : 43~68 D : 68~100 b : 635~641 E : 100~155 (Each IV, λP range did not consider a margin. Please refer to ±18% of IV range, ±1nm of λP range as a permitted limit and do not use to combine grade classification. It must be used separately grade classification) * Recommended Soldering Land Pattern The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SA1316-H 6. Electrical Characteristic Curves Fig. 2 IV - IF Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 1 IF - VF Forward Current IF [mA] Forward Voltage VF [V] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Ambient Temperature Ta [ ℃] Fig. 5-1 Radiation Diagram(X) Relative Luminous Intensity Iv [%] Wavelength λ [nm] Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%] The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A)