AUK CORP. SA1316 1. Features ◆ 1.6mm(L)×0.8mm(W) small size surface mount type ◆ Thin package of 0.55mm(H) thickness ◆ Transparent clear lens optic ◆ Low power consumption type chip LED 2. Applications ◆ LCD backlighting ◆ Keypad backlighting ◆ Symbol backlighting ◆ Front panel indicator lamp 3. Outline Dimensions unit : mm The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SA1316 4. Absolute Maximum Ratings (Ta=25oC) Characteristic Symbol Rating Unit Power dissipation PD 57 mW Forward current IF 25 mA *1 Peak forward current IFP 50 mA Reverse voltage VR 4 V Operating temperature range Topr Storage temperature range Tstg *2 Soldering temperature Tsol ∼80 -30∼100 -25 °C °C 260°C for 10 seconds *1. Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended reflow soldering temperature profile - Preheating 150 to 185 within 120 seconds soldering 260 10 seconds Gradual cooling (Avoid quenching) ℃ ℃) 250℃ 230℃ ℃ Temp( Peak : max 260 ℃ ℃ within 10sec 30~50sec ℃ 165℃ 185 Reflow zone 110±20 sec Pre heating Zone Time(sec) The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SA1316 5. Electrical / Optical Characteristics (Ta=25oC) Characteristic Symbol Test Condition Min Typ Max Unit Forward voltage VF IF= 10mA - 2.0 2.3 V *3 Luminous intensity IV IF= 10mA 2.6 - 10 mcd Peak wavelength λP IF= 10mA - 630 - nm Spectrum bandwidth ∆λ IF= 10mA - 35 - nm Reverse current IR VR=4V - - 10 uA - ±65 - - ±70 - X *4 Half angle θ/2 IF= 10mA Y deg *3.The test result of IF=10mA is only for reference *4.θ/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ◆V F / IV Grade Classification (Ta=25 ℃) Test Condition @IF = 10mA Forward Voltage [VF] 1 : 1.8~2.0 Luminous Intensity [mcd] D : 2.6~4.1 E : 4.1~6.6 2 : 2.0~2.2 F : 6.6~10.0 (Each VF, IV range did not consider a margin. Please refer to ±0.1V of VF range, ±18% of IV range, as a permitted limit and do not use to combine grade classification. It must be used separately grade classification) ◆ Recommended Soldering Land Pattern The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A) AUK CORP. SA1316 6. Characteristic Diagrams Fig. 2 IV - IF Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 1 IF - VF Forward Voltage VF [V] Forward Current IF [mA] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Ambient Temperature Ta [ Fig. 5-1 Radiation Diagram(X) Relative Luminous Intensity Iv [%] ℃] Wavelength λ [nm] Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%] The contents of this data sheet are subject to change without advance notice for the purpose of improvement. When using this product, would you please refer to the latest specifications. Rev.O date: 08-AUG-11 AUK-LDM-001(A)