LESHAN RADIO COMPANY, LTD. LR2001A/L HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS FEATURES 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 Note that the LR2001A series (dual in-line package) and LR2001L series (small-outline IC package) are electrically identical and share a common terminal number assignment. ABSOLUTE MAXIMUM RATINGS Output Voltage, VCE ........................... 50 V Input Voltage, VIN ................................ 30 V Continuous Output Current, IC ................................................. 500 mA Continuous Input Current, IIN ........... 25 mA Power Dissipation, PD (one Darlington pair) ..................... 1.0 W (total package) ....................... See Graph Operating Temperature Range, TA .................................. -40°C to +85°C Storage Temperature Range, TS ................................. -55°C to +150°C Ver 1.5 Aug 2009 ■ TTL, DTL, PMOS, or CMOS-Compatible Inputs ■ Output Current to 500 mA ■ Output Voltage to 50 V ■ Transient-Protected Outputs ■ Dual In-Line Plastic Package or Small-Outline IC Package Ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads, the Series LR2001A/L high-voltage, high-current Darlington arrays feature continuous load current ratings to 500 mA for each of the seven drivers. At an appropriate duty cycle depending on ambient temperature and number of drivers turned ON simultaneously, typical power loads totaling over 120 W (350 mA x 7, 50 V) can be controlled. Typical loads include relays, solenoids, stepping motors, magnetic print hammers, multiplexed LED and incandescent displays, and heaters. All devices feature open-collector outputs with integral clamp diodes. The LR2001A/L have series input resistors selected for operation directly with DTL TTL PMOS or CMOS. These devices will handle numerous interface needs - particularly those beyond the capabilities of standard logic buffers. The LR2001A/L are the standard Darlington Array. The outputs are capable of sinking 500 mA and will withstand at least 50V in the OFF state.Outputs may be paralleled for higher load current capability. These Darlington arrays are furnished in 16-pin dual in-line plastic packages (suffix “A”) and 16-lead surface-mountable SOICs (suffix “L”). All devices are pinned with outputs opposite inputs to facilitate ease of circuit board layout. All devices are rated for operation over the temperature range of -40°C to +85°C. 1/8 ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS LESHAN RADIO COMPANY, LTD. PARTIAL SCHEMATICS LR2001A/L (Each Driver) COM 7.2K 3K 2.5 2.0 SUFFIX 'A', R θJA = 60°C/W 1.5 1.0 0.5 0 SUFFIX 'L', R θJA = 90°C/W 25 75 100 125 50 AMBIENT TEMPERATURE IN °C 150 Recommended Operating Conditions (Ta = −40 to 85°C) Characteristic Output voltage Symbol Test Condition Min Typ. Max Unit 0 ⎯ 50 V Duty = 10% 0 ⎯ 350 Duty = 50% 0 ⎯ 100 Duty = 10% 0 ⎯ 300 Duty = 50% 0 ⎯ 90 0 ⎯ 24 2.8 ⎯ 24 0 ⎯ 0.7 VCE A Output current IC L Input voltage VIN Input voltage (output on) VIN (ON) Input voltage (output off) VIN (OFF) Tpw = 25 ms 7 Circuits Ta = 85°C Tj = 120°C IOUT = 400 mA hFE = 800 mA/ch V V V Clamp diode reverse voltage VR ⎯ ⎯ 50 V Clamp diode forward current IF ⎯ ⎯ 350 mA Ta = 85°C ⎯ ⎯ 0.76 Ta = 85°C ⎯ ⎯ 0.65 Power dissipation Ver 1.5 Aug 2009 A L PD W 2/8 LESHAN RADIO COMPANY, LTD. LR2001A/L ELECTRICAL CHARACTERISTICS at +25°C (unless otherwise noted). Characteristic Output Leakage Current Collector-Emitter Saturation Voltage Input Current DC Forward Current gain Symbol ICEX VCE(SAT) Test Fig. Applicable Devices 1 2 Limits Typ. Max. Test Conditions Min. Units V CE = 50 V, TA = 25°C — <1 50 µA VCE = 50 V, TA = 70°C — <1 100 µA I C = 100 mA, IB = 250 µA — 0.9 1.1 V lC = 200 mA, IB = 350 µA — 1.1 1.3 V IC = 350 mA, IB = 500 µA — 1.3 1.6 V 1.45 mA IIN(ON) 3 V IN = 12V — 1 IIN(OFF) 4 l C = 500 µA, TA = 70°C 50 65 — µA I C = 350 mA, VCE = 2 V 1000 — 15 25 pF HFE Input Capacitance CIN — All Turn-On Delay tPLH 8 All 0.5 EIN to 0.5 EOUT — 0.25 1.0 µs Turn-Off Delay tPHL 8 All 0.5 EIN to 0.5 EOUT — 0.25 1.0 µs Clamp Diode Leakage Current IR 6 All VR = 50 V, TA = 25°C — — 50 µA VR = 50 V, TA = 70°C — — 100 µA Clamp Diode Forward Voltage VF IF = 350 mA — 1.7 2.0 V 7 All Complete part number includes suffix to identify package style: A = DIP, L = SOIC. Ver 1.5 Aug 2009 3/8 LESHAN RADIO COMPANY, LTD. TEST FIGURES FIGURE 1 FIGURE 3 FIGURE 2 VCE OPEN OPEN OPEN I hFE = C IB µA IIN ICEX OPEN mA V IB VCE FIGURE 4 IC FIGURE 5 VCE OPEN OPEN VIN FIGURE 6 OPEN VR µA µA IIN IR IC µA OPEN VIN V V VCE FIGURE 7 IC FIGURE 8 +50 V VIN INPUT V OPEN 50% 50% IF VF OUTPUT t pHL t pHL 50% Ver 1.5 Aug 2009 PULSE GENERATOR PRR = 10KHz DC = 50% 50% INPUT 93 Ω 30 Ω 100 Ω OUT 50 pF 4/8 LESHAN RADIO COMPANY, LTD. ALLOWABLE COLLECTOR CURRENT AS A FUNCTION OF DUTY CYCLE (Dual In-line-Packaged Devices, Suffix ‘A’) (Small-Outline-Packaged Devices, Suffix ‘L’) 600 600 TA = +70°C RθJA = 90°C/W OUTPUT CURRENT IN mA/CHANNEL OUTPUT CURRENT IN mA/CHANNEL 1 2 400 3 4 5 6 7 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +70°C RθJA = 60°C/W 0 400 2 3 4 200 5 6 7 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY 0 0 20 40 80 60 100 0 80 60 100 DUTY CYCLE IN PER CENT SATURATION VOLTAGE AS A FUNCTION OF COLLECTOR CURRENT COLLECTOR CURRENT AS A FUNCTION OF INPUT CURRENT 600 200 0 CA L 400 PI TY PI M CA AX L .S AT UR AT IO N VO LT AG E 400 TY COLLECTOR CURRENT IN mA 600 COLLECTOR CURRENT IN mA 40 20 DUTY CYCLE IN PER CENT 200 . AX M D Q' RE T PU IN T EN RR CU 0 0 0.5 1.0 1.5 2.0 0 200 400 600 INPUT CURRENT IN µA COLLECTOR-EMITTER SATURATION VOLTAGE INPUT CURRENT AS A FUNCTION OF INPUT VOLTAGE 2.5 INPUT CURRENT IN mA — I IN 2.0 M MU XI MA 1.5 TY P IC AL 1.0 0.5 AREA OF NORMAL OPERATION WITH STANDARD OR SCHOTTKY TTL 0 2.0 3.0 4.0 5.0 6.0 INPUT VOLTAGE Ver 1.5 Aug 2009 5/8 LESHAN RADIO COMPANY, LTD. TYPICAL APPLICATIONS +V +VCC +V +VSS 1 16 1 16 2 15 2 15 3 14 3 14 4 13 4 13 5 12 5 12 6 11 6 11 7 10 7 10 8 9 8 PMOS OUTPUT 9 TTL OUTPUT +VCC +V RP +VDD +V 1 16 1 16 2 15 2 15 3 14 3 14 4 13 4 13 5 12 5 12 6 11 6 11 7 10 7 10 8 200 Ω 2N4901 200 Ω 9 8 9 TTL OUTPUT CMOS OUTPUT Ver 1.5 Aug 2009 6/8 LESHAN RADIO COMPANY, LTD. PACKAGE DESIGNATOR “A” Dimensions in Inches (controlling dimensions) 0.014 0.008 9 16 0.430 MAX 0.280 0.240 0.300 BSC 1 0.070 0.045 0.100 0.775 0.735 8 0.005 BSC MIN 0.210 MAX 0.015 0.150 0.115 MIN 0.022 0.014 Dimension in Millimeters (for reference only) 0.355 0.204 9 16 10.92 MAX 7.11 6.10 7.62 BSC 1 1.77 1.15 2.54 19.68 18.67 BSC 8 0.13 MIN 5.33 MAX 0.39 3.81 2.93 MIN 0.558 0.356 Ver 1.5 Aug 2009 7/8 LESHAN RADIO COMPANY, LTD. PACKAGE DESIGNATOR “L” Dimensions in Inches (for reference only) 16 9 0.0098 0.0075 0.1574 0.1497 0.020 0.013 0.2440 0.2284 1 2 3 0.050 0.3937 0.3859 0.050 0.016 0° TO 8° BSC 0.0688 0.0532 0.0040 MIN. Dimension in Millimeters (controlling dimensions) 16 9 0.25 0.19 4.00 3.80 0.51 0.33 6.20 5.80 1 2 3 1.27 10.0 9.80 BSC 1.27 0.40 0° TO 8° 1.75 1.35 0.10 MIN. Ver 1.5 Aug 2009 8/8